Repairs to uPVC Windows

uPVC is a great option for modern homes. They are easy to maintain and upvc window repair are durable and long-lasting. In contrast to aluminium and timber, they don't rust or rot.

Regularly cleaning and lubricating upvc window repair windows and doors is crucial. This will reduce repair costs as well as improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home and even be fatal. It is important to make sure that your windows are in good shape.

Single-pane windows are relatively simple to replace, and they will usually fit into the frames of the past easily. If you have double-paned windows that are joined by internal beading, it will be harder to remove and replace the old panes. In this instance, it is necessary to buy plastic spacers to help the new pane fit into the window frame.

If you plan to attempt to remove the window panes by yourself, it is essential to wear the appropriate safety equipment such as gloves that are thick and eye protection. It is also recommended to lay down a drop cloth before you start working on the glass to ensure that any shards will fall onto the fabric rather than on the floor, where they could be trampled upon and cause further damage.

It's a great idea seal the gap after the glass has been removed. This will keep drafts and water from entering your property until a professional comes out to fix the window. This also serves as an obstruction to prevent intruders from making their way into your home. If the gap is particularly large, you may think about the security door with an integrated window, as this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows made of sash. As time passes, they may develop a number of problems such as sliding. A window that isn't properly aligned can cause problems with light, draughts and even security. It's crucial to act immediately if you notice your uPVC windows are sagging.

To fix a sagging window you can try repositioning the hinges. To accomplish this, you'll need to open the window to get to the frame. Then, you can remove the hinges on the top and bottom using a screwdriver and adjust them clockwise or counter-clockwise. Close your window to test the fit after you have moved your hinges. If you're happy with the fit, tighten the screws to ensure that they stay in position.

If you are unable to reposition the hinges, you might have to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, leading them to loosen. If this happens, it's important to replace the seal as fast as possible so that your uPVC windows remain watertight and secure from draughts.

uPVC handles may also loosen up. Most often this is due to screws that have become loose over time. However, it can also happen because the handle mechanism has been worn out. Luckily, it's not difficult to repair a loose uPVC window handle yourself. First, you'll need to close the window and do an initial fitting. The joint at the corner of the sash must align with the joint on the casing. If it isn't, you can use a screwdriver to loosen the handle, and then turn the mechanism back into the position it was in.

3. Water Leaks

It is important to act if you wake up every morning to find a smoky wall and wet floors. Leaks of water from windows can cause structural damage to your home and affect your ability to regulate the temperature inside your home. The most frequent reason for leaks in uPVC windows is that the sealant surrounding the frame is damaged or not present.

This is a relatively easy fix and should be undertaken by any skilled DIYer. Depending on how severe the issue is, old caulking might need to be removed. It is crucial to remember that when it comes to uPVC window repairs, do not be tempted to apply too much caulk and then make the area more difficult to clean and can reduce the efficiency of your energy.

Make sure that the drainage holes do not have debris inside them and that the sill pan is angled correctly to drain away from the window. In more serious cases you may need to think about replacing the window.

Other indicators of water leakage include decayed sills and the appearance of black spots of mold on the walls near the window. The fungus thrives in conditions of dampness and can spread quickly throughout the home.

It is also important to note that if the leak is coming from between the glass of your double glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sliding. This can be easily corrected by a Upvc window repair window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open or uPVC window repair it blows open with an ease. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Like any mechanical component hinges are prone to be damaged over time. It is essentially a very simple procedure, but it is easier to do with someone else to help you hold the frame in place.

It is also worth checking that the uPVC hinges are being opened and closed in the correct direction. You can do this by looking for the arrows on each hinge, this indicates which way the window should open.

The problem can be caused either by opening the window incorrectly or due to a poor installation at the factory. Sending us a photo via our website is often enough to solve the issue. We are more than happy to give advice.

It is also important to grease the hinges regularly. Applying a light engineering lubricant to the hinges is an ideal method of doing this. We suggest using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window operate and close more easily. It also decreases the chance of windows getting stuck and stop corrosion. Ideally, you should do this at least once a year. WD40 and other solvent based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by several different causes. The hinges, also because of wear and tear, may become displaced, which can cause a gap to form where the sash joins the frame. This can be easily fixed by giving them a thorough clean, however if they are beyond repair it might be necessary to have them realigned or replaced. The second is the interlock, which is located on the hinge side of the window, may also become misaligned, again it may be possible to just give them a thorough clean, however in certain cases, it may be necessary to get them replaced.

The second most frequent reason for draughts are the window seals, these are susceptible to being worn out or damaged over time, and let air escape through these gaps. Installing high-quality weatherstripping will help to stop draughts. Replace the windows made of Upvc with low-emissivity glass. This will help to regulate indoor temperatures and decrease the risk of draughts.

One of the most effective ways to cut down on drafts is to use an draught excluder. These are usually fabric tubes that are filled with some type of filler. They can be placed on the top of your windowsill. They can help block out cold air and keep your home warm and cosy!

Your windows made of upvc will continue to provide excellent insulation and security to your home with a little regular maintenance and repairs. It is crucial to keep in mind that all windows eventually wear out and it is cheaper to replace them rather than repair them. If you are experiencing problems with your upvc windows, it's best to seek professional assistance as soon as possible.