Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are easy to maintain and durable, as well as long-lasting. Unlike timber and aluminium, they don't get rusty or decay.

Regularly cleaning and lubricating UPVC windows and UPVC Window Repairs doors is crucial. This will reduce repair costs as well as improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large amount of damage to your home, making it very dangerous and potentially fatal. It is essential to ensure that your windows are in good shape.

Single-pane windows are relatively simple to replace and typically fit into old frames very easily. If windows with double panes are held together by internal beading, it is harder to remove and replace the panes that were previously in use. In this situation you'll need source some plastic spacers to assist the new pane to fit correctly into the window frame.

If you're planning to try to remove the glass panes yourself, it is essential to wear appropriate safety gear such as gloves that are thick and eye protection. It is also recommended to lay down a dropcloth before you begin working on the window panes to ensure that any shards fall on the fabric and not on the floor, where they could be trampled.

It's a great idea tape the gap once the glass has been removed. This will stop drafts and water from getting into your property until a professional comes out to fix the window. This will also act as a barrier that will prevent any intruders from getting access to your home. If the distance between the window and the door is large, you might want to use an alarm system that includes an opening. This will provide the best of both.

2. Sagging

uPVC windows and doors are a low-cost, durable and energy-efficient alternative to timber sash windows. As time passes, they may be affected by a variety of issues such as sliding. A sagging uPVC windows can cause problems with light, draughts and even security. It's important to take action when you notice your uPVC windows are sagging.

To repair a window that is sagging, you can try repositioning the hinges. First, you'll need to open the windows to get at the frame. Then, using a screwdriver, you can unscrew the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Once you've repositioned the hinges, close the window and check for an appropriate fit. If you're satisfied with the fit of your window, you can tighten screws to secure them in the right position.

If you aren't able to move the hinges you may require replacing the seal. Rubber seals can dry out and lose their elasticity over time, leading them to lose their tightness. It is important to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles may also become loose. This is typically caused by screws that have become undone over time, but it could be caused by the handle mechanism wears out. Fortunately, it's easy to repair the loose uPVC window handle yourself. First, you'll need to close the window and then perform an experiment fitting. The joint at the corner of the sash should be aligned with the joint on the casing. If it doesn't then you can use a screwdriver to loosen the handle and then turn the mechanism back into its original position.

3. Water Leaks

It is crucial to act if you wake up every morning to find a smoky wall and floors that are wet. Water leaks through windows can cause structural damage to your home and also impact your ability to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be done by any DIYer who has the ability. Depending on how serious the issue is, old caulking may need to be removed. It is crucial to keep in mind that when it is about uPVC window repairs, you should not be tempted to apply too much caulk and then make the area harder to clean and reduce the efficiency of your energy.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan has been angled correctly so that it drains away from the window. In more serious instances, you may need to think about replacing the window.

Mold spots and rotten sills are other signs of water leakage. The fungus thrives in conditions of dampness and can spread quickly throughout the home.

If the leakage occurs between the double glazed window repairs-glazed window, it is more likely that the problem is related to the seal, not the frame. Again this can easily be fixed by an uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open or if it blows open with an ease. These are easily replaced by any competent DIYer and can be done within a few minutes.

Almost every household in the UK will have either top hung or side-hung uPVC windows that use hinges and, like all mechanical parts, they will wear out over time. The process of replacing a hinge on a window is essentially a very simple process, but it's easier with someone else to help you hold the frame in place.

Make sure that the uPVC hinges open and close in the right direction. You can do this by checking for the arrows on each hinge. This indicates which way the window should open.

The problem can be caused by opening the window incorrectly or due to a poor installation in the factory. Sending us photos through our website can often solve the issue. We are happy to provide suggestions.

Regular lubrication of the hinges is also necessary. This can be done by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can help the window operate and close more smoothly. It can also lower the risk of a window getting stuck and stop corrosion. Ideally, you should do this at least once a year. WD40 and other solvent based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by different factors. The hinges, also because of wear and tear, may become displaced, which can cause an opening to appear where the sash joins the frame. If they are beyond repair, it might be necessary to get them re-aligned. In addition, the interlock could be disaligned. This happens on the hinge's side, Upvc Window Repairs and may need to be cleaned. In some cases it might be necessary to replace the hinges.

The seals may wear out or become damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the upvc window repair window with low-emissivity glass, this will help to regulate indoor temperatures and again will reduce the possibility of draughts.

The final method to cut down on drafts effectively is to use a Draught-exclusion device. These are usually made of fabric tubes filled with a filler that can be hung over your window sill. These will keep your home warm by blocking cold air.

Your upvc windows can remain a great source of insulation and security for your home with a little regular maintenance and repairs. However, it is important to recognise that windows last for a certain period of time and there may come an point at which it is more economical to replace them than fix them. So, if you're experiencing problems with your upvc windows, it is always recommended to seek assistance from a professional as soon as possible.