Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they are not susceptible to rust or rot.

It is important to clean and oil UPVC windows and doors regularly. This will help avoid unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause serious damage to your home and even be fatal. It is essential to take the time to make sure that you're doing everything you can to ensure that your windows are in good shape.

Single-pane windows are relatively simple to replace and typically fit into frames of the past easily. If you have double-paned windows that are held together by internal beading, it is harder to remove and replace the panes that were previously in use. In this instance, it is necessary to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

If you're planning to try to remove the window panes by yourself it is important to wear the appropriate safety equipment that includes gloves with a thick layer of material and protective eyewear. It is also recommended to lay down a dropcloth before you begin working on the glass so that any fragments of glass fall on the fabric instead of landing on the floor, where they could be trampled on and cause further damage.

Once the glass is removed and the glass is removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to prevent water and drafts from getting into the home until a professional comes out and repair the window. This will also act as a barrier, preventing any intruders to gain access into your home. If the gap is particularly large, you might think about the security door with an integrated window, as it offers the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable, durable and energy-efficient alternative to timber windows made of sash. Over time, they can develop a variety of issues such as sagging. A sagging window in uPVC can cause issues with light, draughts and even security. It is crucial to act immediately if you realize that your uPVC windows are sagging.

Repositioning the hinges could help fix a window that is sagging. First, you'll need to unblock the windows so you can get at the frame. With the screwdriver, you'll be able to unscrew the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've repositioned the hinges, shut your window and check for an appropriate fit. If you're happy with the fit, tighten the screws to ensure they stay in position.

If you are unable to reposition the hinges, you may need to replace the seal. Over time, rubber seals lose their elasticity and dry out which causes them to lose tightness. If this happens, it's important to replace the seal as quickly as possible so that your uPVC windows remain watertight and secure from draughts.

uPVC handles can also loosen up. This is typically caused by screws that have been removed over time, but it could be caused by the handle mechanism wearing out. It's relatively easy to fix a loose uPVC hand. First, you'll need to close the window and perform a test to ensure that it fits. The joint at the corner of the sash should be aligned with the joint on the casing. If it does not then you can use the screwdriver to loosen up the handle. Then turn the mechanism into position.

3. Water Leaks

If you're waking up to wet floors and mouldy walls each time it rains, it is important that you take action. The leaks of water through windows could cause structural damage to your home and also affect your ability to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is a simple fix that can be done by any DIYer who has the ability. Depending on the severity of the issue is, old caulking may need to be removed. It is important to keep in mind that when it is about uPVC window repairs, you should not be tempted to 'over-caulk and then make the area harder to clean and can reduce your energy efficiency.

Check that any drainage holes are free of debris inside them and that the sill pan is properly angled to drain away from the window. In more severe cases, you may need to replace the window.

Other indicators of water leakage include rotted sills and the appearance of black spots of mold on the wall near the window. The mold thrives in damp environments and is able to quickly spread throughout the house.

It is also important to note that if the leak is coming from between the glass of your double glazed window repairs near me glazed windows, it is more likely to be an issue with the glass seal, rather than the frame or sliding. It is also possible to be fixed by a uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame if your Upvc window Repair window is difficult to open or if it opens in a breeze. Anyone with the skills to fix them can replace these in a matter of minutes.

Nearly every home in the UK will have top-hung or side-hung uPVC windows that are hinged and like any mechanical part they will wear out over time. It is essentially a very simple process but it can be easier to do when you have a person to help hold the frame up.

Check that the uPVC hinges are closed and open in the proper direction. You can check this by looking for the arrows on each hinge, this indicates the direction in which the window should be opened.

Faulty window hinges could be caused by improperly opening the window a certain way or upvc window Repair due to improper installation in the factory. Sending us a photo via our website will often resolve the problem. We are always happy to offer advice.

Regular lubrication of the hinges is also necessary. Applying a light engineering lubricant to the hinges is a great way to do this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also decreases the possibility of a window sticking and help prevent corrosion. This must be done at a minimum once a year. WD40 and other solvent based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a few various factors. The hinges can also become unbalanced due to wear, creating gaps between the frame and sash. This can be easily fixed by giving them a good clean, but in the event that they are beyond repair it may be necessary to get them realigned or replaced. The second is the interlock, which is located on the hinge of the window, may be misaligned. Again, it's possible to just give them a clean but in some cases it might be necessary to get them replaced.

The seals may wear out or be damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping can help keep draughts at bay. Replace the windows made of Upvc with low-emissivity lenses. This will help control indoor temperatures and decrease draughts.

Lastly, one of the most effective ways to reduce drafts is to use a draught excluder. These are usually fabric tubes which are filled with a sort of filler and can be placed on the windowsill on top. They can help keep cold air out and keep your home warm and cosy!

With a little maintenance and repair, your upvc windows will continue to provide excellent security and insulation for your home. It is important to remember that all windows eventually get worn out and it may be cheaper to replace them than to repair them. If you encounter any issues with your upvc window you should consult a professional as soon as you can.