Double Glazing Lock Repairs

Having quality locks on your windows and doors can stop burglars from accessing your home. They generally don't like breaking glass or trying to wiggle through windows that are not closed.

However, some double glazing owners have encountered issues with their door or window lock after it was installed. Luckily, these problems are often fixable without having to purchase new double glazing.

Broken or damaged locks

If your uPVC window or door lock is broken or faulty, then a locksmith can fix it for you. They can repair hinges, striker plates, and locks for your double glazing. They can also adjust the cylinder to fix any misalignment which could cause your handle to work properly.

If the key fits inside the lock but doesn't turn or is difficult to insert then the mechanism may be locked up. Dirt or grease can be trapped in the mechanism. If this is the case, then it might be possible to clean the lock and then lubricate it. Make use of a dry lubricant, like graphite or Teflon, not oil, because oil attracts dirt and cause it to stick to the inside of the mechanism. After lubricating the lock you must insert the key and then try to turn it. The lubricant should be absorbed into the mechanism, and the lock should turn smoothly.

A damaged lock can be caused by loose screws inside the lock mechanism. They can become loose, fall out, or even break off completely, preventing the lock from being able to perform as it should. A screwdriver is a tool to tighten these screws, however, caution must be taken not to over-tighten them since this could damage the internal components.

A damaged lock could be dangerous for both you and your family members particularly if you have young children. It is possible for them to open the door without you knowing and thus allow them access to your home. If you're worried that this could occur, a licensed professional locksmith can help re-secure the double glazing doors.

Misty Glaze is a professional uPVC company in Lancing that can repair all types faulty and broken mechanisms on both uPVC windows and doors. We can also modify the locking system on your uPVC windows or double glazing to meet your needs. This means that replacement windows or doors are not always necessary.

Handles that are broken or faulty

As part of their overall security package, most double-glazed windows feature a multipoint lock. This is a great option for those concerned with criminals who are looking for ways to gain access to your home. It's also worth asking your installer about anti-lift blocks that can be installed in addition to the locks already in place and help keep your window firmly locked in the closed position.

It's not uncommon for handle locks to get damaged or fail. They are the first part of your window that will be forced open by criminals who want to break into. Luckily, the good news is that this is one of the most simple parts to repair.

Modern uPVC and aluminium handles have a multi-point locking mechanism called Espagnolette which is designed to resist forced entry. This upgrade to security is typically offered as an optional extra on new uPVC window installations. Older uPVC and aluminium handles can be upgraded to lock bolts that shoot also as an optional feature on all new double-glazed window installations.

It is important to repair a handle as soon as possible if it is damaged. The damaged handles could stop the window from closing properly and allow a draft to enter. It could also be a weakness that opportunistic thieves could take advantage of and put the belongings of your family and your personal belongings at risk.

The process of fixing the malfunctioning mechanism begins by gaining access to the frame of the window and removing the broken handle. The gearbox is then accessed to identify the type of gearbox that is used to open the handle. This will permit to replace the handle that matches the profile and internal window frame mechanisms.

Once the mechanism has been replaced the handle can then be re-attached with the original screws - however, we generally recommend replacing them with more long screws as this will give the most secure fit. The final step is to seal the handle using a clear sealant. This will shield it from further deterioration. After that the window will be functional again and at a fraction of the cost of replacing the entire window.

Hinges that are Broken or Faulty

If your windows do not shut properly, you could experience draughts, a weakening of your home's security barrier and an increased risk of water or damp damage. Broken or defective window hinges are a common issue that can be fixed easily.

If your uPVC windows don't open or close, it is likely that the hinges need to be replaced or repaired. While a lot of window companies require that you purchase a new window unit to fix this simple problem We can replace the damaged hinges and save you money.

Window hinges can often break due to repeated use or may be weakened due to corrosion over time. If you have a broken window hinge, it's essential to take steps to avoid further damage. This means not causing the window to open or close.

You can find the correct parts for your hinge by identifying its type. Maco, Mila and Roto are all manufacturers of window repairs near me [plantsg.com.sg] hinges. It's best to consult a professional in this case to avoid the mistake of purchasing parts that are not compatible with your current hardware and cause further damage.

Faulty hinges can be a big issue for your uPVC windows and doors. They can be the main source of noise, and could also allow water to infiltrate your windows.

Check whether the pin barrels on both sides of the hinge are aligned. If it isn't tapping the headpin, use the hammer to make a slight bend in hinge barrel. This will help to keep the pin in the right position. A friend can help you hold the doors as you remove hinge screws and hinges. Replace the hinges using those that are of the same size, and then attach the screws using glue. When the glue is drying, fix the hinges using weights or clamps.

After you have fixed your hinges, you are able to install the door again. You can also reattach the handle. Replace the screws with wooden dowels of the same length as the original screw to ensure that they are compatible.

Broken or Faulty Glass

While uPVC windows do a great job of keeping the cold out and warm in, they may become damaged over time. This could include cracked or damaged glass as well as defective locks. This is an issue that could be extremely costly if not addressed. It can also affect the appearance of your home and can result in a decrease in insulation. It is essential to repair any damage immediately.

If your glass is broken but isn't shattered it is possible to fix it yourself using the appropriate tools and techniques. Make sure the area around the broken glass is free of debris, so that fragments don't cause injury or cause a trip hazard. Remove any broken glass pieces and dispose of them in a proper way. Apply masking tape across the entire area. This will stop glass fragments from sticking to your skin and splintering when you move them. If you're dealing with a double-pane glass, it's a good idea to fit the glass pane before gluing it back in place so that you are sure you'll have enough space to complete the project.

Before applying the glue, wipe the surface of the damaged frame and the glass with a an unclean, dry cloth. Follow the curing and Window Repairs Near Me application instructions that differ from product to product. Based on the degree of the crack you may need to secure the glass during the curing process with lightweight clamps specifically designed to support fragile materials.

After the adhesive has set, carefully place the glass inside the window frame. Make sure that it is in line with the frame edge and that there aren't gaps between the glass sash and frame. Avoid bending the glass as you put it back in place because this could weaken the seal. This can lead to condensation or water infiltration.

If you have a glass door that's completely broken or has larger cracks, consult a professional glazier such as O'Brien(r) to organise the replacement. It's important to act quickly if you have broken glass.