Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are easy to maintain and are durable and long-lasting. In contrast to aluminium and timber, they don't get rusty or decay.

It is important to clean and oil UPVC windows and doors regularly. This will reduce costly repairs and improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large deal of damage to your home, which can make it extremely dangerous and possibly fatal. It is important to make sure that your windows are in good condition.

For single pane windows, it is relatively easy to replace them, and the new window is usually able to fit into the frame that was previously installed easily. If windows with double panes are held together by internal beading, it will be difficult to remove and replace the old panes. In this situation you'll need locate some plastic spacers that will aid the new pane in being able to fit properly into the frame of the window.

If you plan to attempt to remove the window panes yourself it is important to wear appropriate safety gear such as gloves that are thick and protective eyewear. It is also an excellent idea to lay down a drop cloth prior to when you begin working on the glass to ensure that any shards will fall on the fabric instead of onto the floor where they can be trampled upon and cause further damage.

It's a great idea seal the gap after the glass is removed. This will prevent drafts and water from getting into your property until a professional is able to fix the window. It also acts as an obstacle to stop intruders from making their way into your home. If the distance between the window and the door is large, you might need to consider a security screen that also has a window. This will give you the best of both.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash windows. Over time, they can be affected by a variety of issues, including sliding. A window that is sagging can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to shrink, it is important to act swiftly to prevent the problem from becoming worse.

To repair a window that is sagging, you can try repositioning the hinges. To do this, you'll need open the window so that you can get to the frame. Then, remove both the hinges at the top and bottom using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Once you've repositioned the hinges, close your window and verify the an appropriate fit. If you are happy with the fit of your window, tighten the screws to secure them in place.

If you aren't able to move the hinges, you may need to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, which causes them to lose their tightness. If this happens, it's essential to replace the seal as fast as possible so that your uPVC windows are watertight and Window Repairs draught-proof.

uPVC handles could also loosen. This is usually due to screws that have become undone over time, but it can be caused by the handle mechanism wearing out. It's relatively simple to repair a loose uPVC handle. You'll first need to close the window and perform an experiment fitting. The joint at the corners of the sash should be aligned with the joint on the casing. If it does not you can use a screwdriver to loosen up the handle. Then, you can turn the mechanism to position.

3. Water Leaks

If you wake up to damp floors and mouldy walls every time it rains it's crucial to take action. Water leaks from windows can not only cause destruction of your home's structure but also hamper your efforts to regulate the temperature within your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is a fairly simple fix that can be completed by any DIY expert. Depending on the severity of the issue the caulking that was used up may need to be removed before a new layer of caulk is applied. It is crucial to keep in mind that when it comes to uPVC window repairs, do not be tempted to 'over-caulk' as this will only make the area harder to clean and could reduce the efficiency of your energy.

Make sure that the drainage holes have no debris in them and ensure that the sill pan is properly angled to allow the water to drain from the window. In more serious cases you might have to consider replacing the window.

Mold spots and rotted sills are also signs of water leakage. The is a fungus that thrives in damp conditions and is able to quickly spread throughout the house.

If the leakage is occurring between the double-glazed glass it is more likely that the problem is with the seal rather than the frame. A uPVC specialist can easily solve this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and open in a breeze it could be the hinges that are at the fault. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Almost every household in the UK will have top-hung or side-hung uPVC windows that use hinges and, like all mechanical parts, they will wear out over time. The process of replacing a hinge on a window is an easy procedure, but it is easier when you have a person to help you hold the frame in place.

Verify that the uPVC hinges are closed and open in the correct direction. Look for the arrows on each hinge to determine which way the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window in a certain manner or because of poor installation at the factory. It is usually possible to fix the issue by sending us a picture through our website and window repairs we will be pleased to offer you advice.

It is also essential to lubricate the hinges on a regular basis. Applying an engineering lubricant that is light to the hinges is an ideal way to do this. We suggest using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also lower the chance of windows sticking and prevent corrosion. This should be done at least once a year. WD40 or other solvent-based oils should not be used since they could damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different causes. The hinges can also be unbalanced due to wear, creating an opening where the sash meets frame. If they are damaged beyond repair, it might be necessary to get them re-aligned. The interlock, which is located on the hinge side of the window repairs, can be misaligned. Again, it may be possible to just give them a clean but in some cases it might be necessary to have these replaced.

These seals are susceptible to wear and tear or become damaged over time, allowing air to escape. Installing high-quality weatherstripping is a good way to keep draughts at bay. Replace the upvc windows with low-emissivity glasses. This will help regulate indoor temperatures, and reduce draughts.

The final method to cut down on draughts effectively is by using a Draught-excluder. These are usually made of fabric tubes filled with a filler which can be hung over your window sill. They can help keep cold air out and keep your home warm and cozy!

The windows made of upvc can keep providing excellent insulation and security for your home with regular maintenance and repairs. It is essential to remember that all windows will eventually wear out and it may be more cost-effective to simply replace them instead of fixing them. If you are experiencing issues with your Upvc windows, it is recommended to seek assistance from a professional as soon as you can.