Choosing uPVC Replacement Window Handles

Most customers agree that the Upvc replacement handles are simple to install and feel great. It's crucial to understand that the handle you choose for your window should be suitable.

The key factor is the step height, which is the distance from the nose of the handle to the base or frame. Other considerations include lockable mechanisms and styles.

Replacement parts

There is a variety of replacement upvc window handles available to buy. They come in many different colours and styles so there is sure to be something to suit your windows. It's easy to impulse buy especially when the handle breaks so it's best to take your time and check certain things prior to committing to buying a replacement. The first thing to think about is what kind of upvc handle do you currently have and what the difference between the kinds is. The table below outlines the most popular handles to help you find the one that is suitable for your windows made of upvc.

The majority of double-glazed windows come with epag handles. They are usually attached to the frame using two screws that are screwed into the frame from both sides, above and below.

They come with a spindle bar on the back which can come in a variety of sizes. This will determine the way they operate (either left or right handed). This is the reason it's crucial to measure the current handle to ensure you're ordering the correct replacement.

Usually, they are fixed with two bolts much like the Espag handle but they have a low projection from the frame, which means that the arm won't poke through your blinds. This is a great choice if you want the handle to blend with your blinds and upvc windows.

Cockspur handles are similar to Espag handles but they have a nose that closes over a wedge which sits on the frame of the window. This type of handle is commonly found on older upvc windows as well as some wooden windows.

Tilt and turn handles are usually found on casement windows. They can be operated by turning the handle or pressing at the top of the window. This opens the window from the inside and allows you to clean the outside without needing to step out onto a ladder or step over the fence. These are also an excellent option for those who have limited mobility and enhance security and access to the home.

Hints and tips

Many people will need to replace their uPVC window handles at some time. It is important to know a few tips and tricks that can help you make the task easier.

The first thing to do is determine the type of handle you have at home. Depending on the type of handle and locking mechanism, it may be necessary for you to replace the lock and handle. If the roller cams or shoot bolts (espags) are blocked or seizing up, you'll have to replace them, along with the handle.

Thankfully, the majority of uPVC handles adhere to industry standards and are very alike. This allows for a relatively easy process. The first step is to remove the screw covers from the handles, which are typically pozi-drive screws. Once these are removed, you can take the handle apart.

It's a good idea to keep track of how much the spindle protrudes from the base of your handle when you remove it. This will allow you to measure the length of the spindle to determine the replacement glass for windows handle. To do this, simply take a measurement of the square peg that sticks out from the bottom of the handle and use it as a guide.

This is especially important for inline uPVC windows handles, as they are always straight and only open to the left or right. They won't work in the middle. It's a good idea if you're not sure of the type of handle you have at your home to borrow a handle and check out how it functions.

You can also determine the handiness of a uPVC window by observing the way the handle turns when it is used. Handles can be rotated clockwise or counter-clockwise. If you aren't sure you are, ask someone else to open the window with the handle and see what happens.

Take a measurement of the spindle

The selection of the right replacement handle for softjoin.co.kr your windows could be a challenge as there aren't all handles that are the same size. It is important to measure the spindle accurately when fitting a new handle. This will ensure that the handle is suitable. There are a variety of types of uPVC window handles that work in different ways, therefore it is crucial that you know what type of handle you have and the type of locking system you have.

The spindle of the Espag handle is a part that extends from the rear of the handle, and is inserted into the lock gearbox within the window frame. When you turn the handle this turns the lock within the gearbox, and opens the window. They are installed on uPVC windows with casement and can be locked with keys to provide additional security.

Cockspur handles have an "nose" that is closed over a wedge-shaped striker block on the frame. They are usually found on older double-glazed uPVC windows. They are also quite simple and they can be locked with keys. These handles are slightly more difficult to locate replacements for as they are not as common as the handles with a espagnolette.

If you own a tilt-and-turn uPVC and you require a new handle that has an alternative locking system. This will be able to open the window by tilting it, but also turn it back and forth to open it fully. It is essential to select a handle with an opening of at least 55mm to be able to reach the window frame.

The same method can be used to remove and replace the uPVC handle. However, you'll need to take care when you remove it. It is possible to open the window more than usual to reach both screws that hold it to the frame. Once you have put in your new uPVC handles and checked that they are in the right position then tighten the screws and test to ensure the lock is working properly.

Fit the new handle

Once you have the right replacement handle it can be screwed in the right place. This will require a screwdriver, but could be simpler with an electric one. It is important to not overtighten the screws before screwing them into. This can cause the knob or handle to warp.

Inserting the spindle is the next crucial step to install the new handle. The spindle is a part that runs through the handle and operates the locking mechanism inside the window. It is crucial that it is installed correctly since this will ensure the window can be shut and opened securely.

There are a variety of types of uPVC handles. They include:

Espagnolette Handles are handles inline which can be used to open tilt windows and turn them.

Cranked Espagnolette Handles: These are like inline handles but have a curved design that is useful for difficult-to-reach windows.

Tilt and turn handles - These are used to operate the opening mechanisms and xn--9i1b12ab68a.com closing mechanisms on tilt and turn windows. They also allow for the movement of windows.

These are the most commonly used and the majority of uPVC windows replacement have them in their place. In the UK they are usually referred to as "Bay Windows".

If your uPVC window handle is broken it can be extremely frustrating. There is no need to change the entire uPVC window because of a damaged window handle. There are a few easy steps you can follow to fix or replace a damaged uPVC handle.

Fixing your broken window handle quickly by identifying the type and measuring the spindle. It is important to take your time and prioritise safety when working with windows and tools, but this is a relatively easy task. It can mean the difference between having a secure and secure home or a window that is easily opened. If you have any questions or would like to speak with a professional regarding replacing your window handle, contact Bridgewater Glass. We have a group of experienced and knowledgeable experts who can assist with any issues you may be facing.