Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they don't get rusty or decay.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will help avoid unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home and even be fatal. It is essential to take the time to make sure that you are doing everything you can to ensure that your windows are in good repair.

Single-pane windows are relatively simple to replace, and they generally fit into frames that were previously in use very easily. If you have double glazed window repairs-paned windows that are held together by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this instance you'll need find some plastic spacers that assist the new pane to fit properly into the window frame.

Wearing eye protection and thick gloves is a must for anyone who plans to remove the glass by yourself. It is also a good idea to lay down a drop cloth before you begin working on the glass, so that any fragments of glass fall on the fabric rather than on the floor, where they could be trampled upon and cause further damage.

Once the glass has been removed and the glass is removed, it's a good idea to cover the gap with clear packaging tape or duct tape to prevent water and drafts from entering the home until a professional can come out and repair the window. It also acts as a barrier that will prevent any intruders from gaining entry into your home. If the distance between the door and the window is significant, you may prefer an alarm system that includes a window. This will give you the best of both.

2. Sagging

Upvc Window repair is durable and energy efficient alternative to timber sash window. In time, they could develop a variety of issues such as sagging. A sagging window can cause problems with light, draughts and even security. It's important to take action immediately if you realize that your uPVC windows are falling down.

Repositioning the hinges can aid in fixing a window that is sliding. First, you'll need to unblock the windows so you can reach the frame. After that, using a screwdriver, you can take off the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've adjusted the hinges, shut your window and test it for fitting. If you're satisfied with the fit, tighten the screws to ensure that they remain in place.

If you are unable to reposition the hinges you may require replacing the seal. Over time, rubber seals lose their elasticity and become dry, which causes them to loosen. It is important to replace your seal as soon as you can in order to ensure that your uPVC window waterproof and draughtproof.

uPVC handles may also become loose. This is usually due to screws that have loosened over time, but it can also be due to the handle mechanism wears out. It's relatively simple to fix a loose uPVC hand. You'll first need to close the window and perform an initial fitting. The corner joints of the sash must align with the casing joint. If it does not, you can use the screwdriver to loosen the handle. Then, turn the mechanism back into place.

3. Water Leaks

If you awake to damp floors and mouldy walls every time it rains it's crucial to take action. Windows that leak water do can not only cause degrading of the structure of your home but also hamper your efforts to regulate the temperature in your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is a simple fix that can be accomplished by anyone who is a DIYer with the skills. Based on the severity of the problem the old caulking may need to be removed before a new layer can be applied. It is crucial to remember that when it is about uPVC window repairs, you should not be tempted to 'over-caulk in order to make the area harder to clean and could reduce your energy efficiency.

Check that any drainage holes are free of debris inside them and ensure that the sill pan has been angled correctly to drain away from the window. In more severe situations, you may have to replace the window.

Other indicators of long-term water leakage include rotted sills and the appearance of black spots of mold on the walls near the window. This fungus thrives in damp conditions and is able to quickly spread throughout the house.

If the leakage is occurring between the double-glazed window, it is more likely that the issue is with the seal rather than the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or loose and blow open with ease, it may be the hinges that are at fault. They can be easily repaired by any skilled DIYer and upvc Window repair are usually done within a few minutes.

Like any mechanical component, hinges can be damaged over time. It is very easy to change a window hinge, but it's easier if someone helps you hold the frame.

Make sure that the uPVC hinges are closed and open in the correct direction. You can check this by looking for the arrow on each hinge, this indicates the direction in which the window should be opened.

Faulty window hinges can be caused by incorrectly opening the window in a certain way or due to inadequate installation at the factory. This issue can be fixed by sending us a photo through our website and we will be pleased to offer you suggestions.

Regularly lubricating the hinges is essential. Applying a light engineering lubricant to the hinges is a great method of doing this. We suggest using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also prevent corrosion and reduce the risk of sticking. This should be done at least every year. WD40 and other solvent-based lubricants are not recommended as they can cause damage to your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by a variety of different things. First, the hinges due to wear and tear could become misaligned. This causes an opening to appear between the sash and the frame. These can be easily repaired by giving them good cleaning, but if they are beyond repair it might be necessary to have them realigned or replaced. The second is the interlock, which is located on the hinge side of the window and can be misaligned. Again, it's possible to just give them a clean but in some cases it might be necessary to get them replaced.

These seals are susceptible to wear and tear or get damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with low-emissivity glass. this will help to regulate indoor temperatures and again will reduce the risk of draughts.

Another, and most effective ways to cut down on draughts is by using a draught excluder, these are usually fabric tubes which are filled with a kind of filler. They can be placed on the top of your windowsill. These will help to keep cold air out and keep your home warm and cosy!

With a little regular maintenance and repair, your upvc windows will continue to provide a great level of security and insulation for your home. It is essential to remember that all windows eventually get worn out and it may be more cost-effective to replace them rather than repair them. So, if you're experiencing issues with your Upvc windows, it's best to seek professional assistance immediately.