Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are easy to maintain and are durable and long-lasting. They don't rot or rust like aluminum or timber.

It is essential to clean and oil UPVC doors and windows regularly. This will prevent unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows can cause severe damage to your home, UPVC window repairs and could even be fatal. It is important to ensure that your windows are in good condition.

For single pane windows, it is relatively easy to replace them, and the replacement will generally fit within the frame that was previously installed easily. If windows with double panes are joined by internal beading, it is more difficult to remove and replace the panes that were previously in use. In this case, it is necessary to purchase plastic spacers in order to help the new pane fit into the window frame.

If you're planning to try to remove the window panes by yourself it is crucial to wear the proper safety gear, including thick gloves and protective eyewear. You should also lay down a dropcloth before you begin working on the window panes, so that any shards fall onto the fabric, not onto the floor and could be trampled.

It's a great idea seal the gap after the glass has been removed. This will prevent drafts and water from entering your property until a professional arrives to repair the window. It also acts as a barrier, deterring any intruders from getting access to your home. If the gap is particularly large, you may think about an alarm door that comes with an integrated window as it will provide the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber windows with sash. As time passes, they may develop a number of problems such as sliding. A sagging window in uPVC can cause issues with light, draughts, and even security. If you notice that your uPVC window is beginning to sag it's crucial to act fast to stop the issue from worsening.

Repositioning the hinges could help fix a window that is sagging. To do this, you'll need open the window so that you can access the frame. Then, you can remove the hinges on the top and bottom with a screwdriver and adjust them clockwise or counter-clockwise. Close your window to check the fit after you have relocated your hinges. If you are happy with the fit of your window, you can tighten screws to keep them in place.

If you are unable to reposition the hinges you may require replacing the seal. Rubber seals may dry out and lose their elasticity over time, leading them to loose their elasticity. If this happens, it's crucial to replace the seal as fast as you can to ensure that your upvc window repair near me windows remain watertight and safe from drafts.

UPVC handles can also become loose. This is typically caused by screws that have been removed over time, but it could be due to the mechanism of the handle getting worn out. It's fairly simple to fix a loose uPVC hand. First, you'll need to close the window and then perform a test fitting. The joints at the corners of the sash should be aligned with the joint on the casing. If it does not then you can use the screwdriver to loosen the handle. Then, turn the mechanism to position.

3. Water Leaks

If you're waking up to wet floors and damp walls every time it rains it's important to take action. The leaks of water through windows could cause structural damage to your home and hinder your ability to control the temperature of your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

It is a fairly easy fix and should be undertaken by any DIY expert. Based on the severity of the issue the caulking used previously may need to be removed before a new layer of caulk is applied. It is crucial to keep in mind that when it comes to uPVC window repairs, do avoid the temptation to "over-caulk and then make the area harder to clean and could reduce the efficiency of your energy.

Verify that the drainage holes do not have debris inside them and ensure that the sill pan is properly angled to allow the water to drain from the window. In more serious situations, you might need to consider replacing the window.

Other indicators of long-term water leakage include sills that are rotten and the appearance of black spots of mold on the wall near the window. This is a fungus that thrives in damp conditions and is able to quickly spread throughout the house.

It is also important to keep in mind that if the leak originates from the glass of your double-glazed windows, it is more likely to be an issue with the glass seal, rather than the frame or sagging. A uPVC specialist can easily solve this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open or it blows open with the breeze. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that are hinged and, just like any mechanical component they are susceptible to wear and tear over time. It's easy to change the hinges on a window but it's much simpler if you have someone to help hold the frame.

It is also worth checking that the upvc window repair near me hinges are opened and closed in the right direction. This can be done by checking for the arrows on each hinge, this indicates which way the window should open.

Faulty window hinges could be the result of incorrectly opening the window in a certain way or by inadequate installation at the factory. This can often be resolved by sending us a photograph on our website. We will be happy to give you advice.

It is also crucial to ensure that the hinges are lubricated on a regular basis. Applying a light engineering lubricant to the hinges is a great way to do this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It also helps prevent corrosion and reduce the possibility of sticking. Ideally, you should do this at least once a year. WD40 or other solvent-based lubricants should not be used as they can damage your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by various factors. The hinges may also become disaligned as a result of wear, which can cause an opening between the frame and sash. This can be easily repaired by giving them a good clean, but if they are beyond repair it may be necessary to get them re-aligned or replaced. Second, the interlock can also become disaligned. This is located on the hinge side and might require to be cleaned. In some instances it is possible to replace these.

The next common cause of draughts is the window seals. These are prone to wear or damaged over time and allow air to escape through these gaps. Replacing these with high-quality weatherstripping will help to prevent draughts. Another option is to replace the window with glass that is low-emissivity, this will help in regulating indoor temperatures, and also lessen the risk of draughts.

Another, and most effective methods to reduce the draughts in your home is to use an draught excluder. These are typically fabric tubes which are filled with a kind of filler. They can be put on the top of your windowsill. These will keep your home warm by blocking out cold air.

The windows made of upvc can continue to provide excellent insulation and security in your home by performing regular maintenance and repairs. It is crucial to keep in mind that all windows eventually wear out and it is cheaper to replace them instead of fixing them. If you are having issues with your upvc windows, it is best to seek professional assistance as soon as you can.