Repairs to uPVC Windows

uPVC is a great option for modern homes. They are easy to maintain and durable, as well as long-lasting. They don't get rotten or rusty like timber and aluminum.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will help avoid unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is damaged, it could cause a large amount of damage to your home, which can make it very dangerous and potentially fatal. It is important to take the time to make sure that you are doing everything you can to keep your windows in good shape.

Single-pane windows are relatively easy to replace, and they generally fit into old frames very easily. However If you have double-pane windows that are secured by internal beading, it will be more difficult to remove the panes that are in place and replace them with new ones. In this situation, you will need to source some plastic spacers that aid the new pane in being able to fit perfectly into the frame of the window.

If you plan to attempt to remove the window panes yourself it is important to wear the proper safety gear such as gloves that are thick and protective eyewear. It is also recommended to lay down a drop cloth before you begin working on the window panes to ensure that any shards fall onto the fabric and not on the floor which could cause them to be trampled.

It's a great idea seal the gap after the glass has been removed. This will stop water and drafts from entering your home until a professional arrives to fix the window. It also acts as a barrier that will prevent any intruders to gain access to your home. If the gap is large, you might want to consider using the security door with an integrated window, since it offers the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber sash windows. However, over time they are susceptible to a range of issues like sagging. A window that is sagging can cause problems with light, draughts or even security. It's crucial to act when you notice your uPVC windows are sliding.

Repositioning the hinges can aid in fixing a window which is sliding. To accomplish this, you'll have to open the window to access the frame. With an screwdriver, take off the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. After you've repositioned the hinges, shut your window and test it for an appropriate fit. If you're happy with the fit, you can tighten the screws to ensure that they remain in position.

If you are unable to reposition the hinges, you might need to replace the seal. Rubber seals can dry out and lose their elasticity with time, which causes them to lose their tightness. It is essential to replace your seal as soon as you can to keep your uPVC window waterproof and draughtproof.

UPVC handles can also loosen up. This is often caused by screws that have loosened over time, but it could be caused by the handle mechanism getting worn out. It's fairly simple to fix a loose uPVC handle. The first step is to close your window doctor and do an experiment to ensure that it fits. The joint at the corners of the sash should align with the joint on the casing. If it doesn't you can use a screwdriver to loosen up the handle. Then, you can turn the mechanism into position.

3. Water Leaks

If you awake to wet floors and mouldy walls each time it rains, it's crucial to take action. Water leaks from windows not only lead to the degradation of your home's structure but also hamper your efforts to regulate the temperature within your home. The most common reason for leaks in uPVC windows is that the sealant surrounding the frame has been damaged or not present.

This is an easy fix that can be completed by anyone who is a DIYer with the skills. Depending on how serious the issue is, the old caulking might need to be removed. When it comes to uPVC repair, you should be careful not to over-caulk. This will make your window more difficult to clean and lower its energy efficiency.

Make sure that the drainage holes are free of debris inside them and that the sill pan has been properly angled to drain away from the window. In more serious cases you may need to think about replacing the window.

Mold spots and rotten sills are other signs of water leakage. The mold thrives in damp environments and can quickly spread across the home.

If the leakage occurs between the double-glazed glass, it is more likely the issue is related to the seal, not the frame. This can be easily corrected by an uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window is difficult to open or it opens with an ease. Anyone with the skills to fix them can replace hinges in just a few minutes.

Like any mechanical part hinges will wear out over time. It's very simple to change a window hinge, but it's simpler if you have someone to help you to hold the frame.

Check that the uPVC hinges are open and closed in the right direction. This can be done by checking for the arrows on each hinge. This indicates which way the window should be opened.

The issue can be caused by opening the window improperly or by a poor installation in the factory. This can often be resolved by sending us a photograph through our website and we will be pleased to offer you advice.

It is also important to ensure that the hinges are lubricated regularly. Applying a light engineering lubricant to the hinges is a great method to accomplish this. We suggest using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also lower the chance of windows sticking and prevent corrosion. This must be done at a minimum every year. WD40 and other solvent based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by several different factors. The hinges may also become unbalanced due to wear, creating an opening where the sash and frame meet. This can be easily repaired by giving them good clean, but if they are beyond repair it might be necessary to get them realigned or replaced. The second is the interlock, which is located on the hinge side of the window, may also be misaligned, and again it may be possible to give them a clean but in some instances it could be necessary to have them replaced.

The seals may wear out or become damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping can help stop draughts. Replace the upvc windows with low-emissivity glass. This will help regulate indoor temperatures and lessen the possibility of draughts.

The last way to reduce draughts effectively is by using a draught-excluder. These are usually made of fabric tubes filled with a filler, which can be hung over your window sill. They will keep your home warm by blocking out cold air.

The windows made of upvc can continue to provide excellent insulation and security in your home by performing regular maintenance and repairs. It is essential to remember that all windows eventually get worn out and it may be more cost-effective to simply replace them than to repair them. So, if you are experiencing issues with your Upvc windows, it's recommended to seek assistance from a professional immediately.