Repairs to uPVC Windows

Upvc Window Repair windows are a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. They don't rot or rust like aluminum or timber.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will help prevent unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a great deal of damage to your home, making it extremely dangerous and possibly fatal. It is crucial to take the time to ensure that you're doing all you can to ensure that your windows are in good repair.

For single pane windows, it is fairly easy to replace windows, and the new one will usually fit inside the old frame very easily. If you have double-paned windows which are joined by internal beading, it will be harder to remove and replace the old panes. In this situation you'll need locate some plastic spacers to aid the new pane in being able to fit correctly into the frame of the window.

If you're planning attempt to remove the window panes by yourself it is important to wear the proper safety gear that includes gloves with a thick layer of material and eye protection. It is also recommended to lay down a drop cloth before you begin working on the window panes so that any shards fall onto the fabric and not on the floor and uPVC window repair could be trampled.

It's a good idea to cover the gap with tape after the glass is removed. This will keep drafts and water from getting into your property until a professional arrives to repair the window. This will also provide a barrier to prevent any intruders from making their way into your home. If the gap is large, you may want to consider using an alarm door that comes with an integrated window, since this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are a cost-effective, durable and energy-efficient alternative to timber sash windows. However, with time, they can suffer from a variety of problems including sliding. A sagging window in uPVC can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to shrink, it is important to act swiftly to prevent the problem from becoming worse.

Repositioning the hinges could aid in fixing a window that is sagging. To do this, you'll need open the window so that you can access the frame. Then, using the screwdriver, you'll be able to take off the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after you have moved your hinges. If you're satisfied with the size of the window, tighten the screws to keep them in place.

If you can't reposition the hinges, you might need to replace the seal. Over time, rubber seals lose their elasticity and dry out which causes them to loosen. It is important to replace your seal as soon as you can in order to keep your uPVC window waterproof and draughtproof.

uPVC handles may also become loose. This is often caused by screws that have been removed over time, but it could also be due to the handle mechanism getting worn out. Luckily, it's not difficult to fix a loose uPVC window handle yourself. First, you'll need to shut the window and do a test fitting. The joint at the corners of the sash should align with the joint on the casing. If it does not you can use a screwdriver to loosen the handle. Then turn the mechanism back into place.

3. Water Leaks

It is essential to act if you wake up every morning to discover mouldy walls and wet floors. The leaks of water through windows could cause structural damage to your home and also hinder your ability to control the temperature of your home. The most common reason for leaking uPVC windows is that the sealant around the frame is either damaged or missing.

This is a simple fix that can be accomplished by any DIYer who is competent. Depending on the severity of the problem is, the old caulking might need to be removed. It is essential to keep in mind that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk in order to make the area more difficult to clean and can reduce your energy efficiency.

Make sure that the drainage holes have no debris inside them and that the sill pan has been angled correctly to drain away from the window. In more serious situations, you might have to consider replacing the window.

Other signs of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the walls near the window. The mold thrives in damp environments and can quickly spread across the house.

If the leakage occurs between the double-glazed glass it is more likely the issue is more related to the seal, not the frame. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your upvc window repairs near me windows are stiff to open, or are loose and blow open with ease it could be the hinges that are at the fault. They can be replaced by any competent DIYer and can be done within a few minutes.

Most households in the UK will have top-hung or side hung uPVC windows that are hinged and, just like any mechanical component they are susceptible to wear and tear over time. Changing a window hinge is essentially a simple process, but it's easier with someone else to help you hold the frame up.

It is also worth checking that the uPVC hinges are opened and closed in the correct direction. This can be done by looking for the arrow on each hinge. This indicates the direction in which the window should open.

The problem with the hinges on windows can be caused by incorrectly opening the window a certain way or due to poor installation at the factory. This can often be resolved by sending us a photo on our website. We will be more than happy to give you advice.

Regularly lubricating hinges is also essential. This can be accomplished by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regularly lubrication makes the window easier to open and close. It can also stop corrosion and reduce the risk of sticking. It is recommended to perform this every year. WD40 or other solvent-based lubricants should not be used since they can cause damage to your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by a few various factors. The hinges can also become disaligned as a result of wear, which can cause a gap where the sash meets frame. This can be easily fixed by giving them a good clean, but if they are beyond repair it may be necessary to have them realigned or replaced. The second is the interlock, which is located on the hinge of the window, can be misaligned. Again, it may be possible to just give them a good clean, but in some cases it might be necessary to get them replaced.

These seals are susceptible to wear and tear or get damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glasses. This will help control indoor temperatures and lessen the risk of draughts.

One of the most effective methods to reduce draughts is by using a draught excluder. These are typically fabric tubes which are filled with a sort of filler and can be positioned on the top of your windowsill. These will help to stop cold air from entering and keep your home warm and cosy!

With a little regular maintenance and repairs your windows made of upvc will continue to provide a great level of insulation and security for your home. However, it is important to realize that all windows have a life span and there may come an point at which it is more cost-effective to replace them rather than repair them. So, if you are experiencing issues with your Upvc windows, it is best to seek professional assistance as soon as you can.