Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are long-lasting, durable and easy to maintain. They are not susceptible to rot or rust like timber and aluminum.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will help avoid unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

If the glass in your window is damaged, it could cause a large amount of damage to your home, making it very hazardous and possibly fatal. You should take the time to make sure that your windows are in good working order.

Single-pane windows repair are relatively easy to replace and generally fit into frames that were previously in use very easily. However when you have double pane windows that are secured by internal beading, it'll be more difficult to take out the existing panes and install new ones. In this instance you'll need to source some plastic spacers to assist the new pane to fit properly into the frame of the window.

If you are going to attempt to remove the window panes yourself it is important to wear the proper safety gear, including thick gloves and eye protection. It is also an excellent idea to lay down a drop cloth before you start working on the glass, so that any fragments of glass fall onto the cloth rather than on the floor where they can be trodden under and cause further damage.

It's a great idea seal the gap after the glass has been removed. This will stop drafts and water from entering your home until a professional comes out to repair the window. It also acts as a barrier, preventing any intruders to gain access into your home. If the distance between the door and the window is large, you might want to use security screens that includes a window. This will give you the best of both.

2. Sagging

Upvc windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber windows with sash. However, over time, they can suffer from a variety of issues like sagging. A window that is sagging can cause problems with light, draughts, and sash window repair even security. It's important to take action immediately if you notice your uPVC windows are sliding.

Repositioning the hinges can aid in fixing a window that is sliding. You'll first need to open the windows so you can access the frame. Then, using an screwdriver, remove the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after having moved your hinges. If you are happy with the fit of the window, you can tighten screws to hold them in place.

If you cannot reposition the hinges, you could need to replace the seal. As time passes, rubber seals lose their elasticity and become dry, which causes their tightness to decrease. It is important to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles may also loosen up. Often it is due to screws that have come loose over time. However, it could be due to the fact that the handle mechanism has been worn out. It's relatively easy to repair a loose uPVC handle. First, you'll need to shut the window and perform an experiment fitting. The joint at the corners of the sash must align with the joint on the casing. If it does not, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

If you're waking up to damp floors and mouldy walls each time it rains, it's crucial to take action. The leaks of water from windows do can not only cause destruction of your home's structure but also hinder your efforts to control the temperature within your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is a simple fix that can be done by any DIYer who is competent. Depending on how severe the problem is, the old caulking may have to be removed. It is essential to remember that when it is about uPVC window repairs you should not be tempted to apply too much caulk' as this will only make the area more difficult to clean and could reduce the efficiency of your energy.

Make sure that the drainage holes are free of debris inside them and that the sill pan is angled correctly to drain away from the window. In more serious situations, you might need to consider replacing the window.

Moldy sills and rotten ones are also signs of water leakage. This fungus thrives in damp conditions and can spread quickly throughout the home.

It is also important to remember that if the leak is coming from between the glass in your double glazed windows, it is more likely to be an issue with the glass seal, rather than the frame or sliding. A uPVC specialist can easily solve this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and open with a breeze It could be hinges that are at the fault. These are easily repaired by any DIYer who is skilled and can usually be completed in just a few minutes.

Like any mechanical part hinges will wear out over time. It is very easy to change the hinges on a window but it's much easier if someone helps hold the frame.

It is also important to verify that the uPVC hinges are being opened and closed in the correct direction. You can check this by checking for the arrows on each hinge, this shows which way the window should be opened.

The problem with the hinges on windows can be caused by incorrectly opening the window in a certain manner or because of improper installation in the factory. This issue can be fixed by sending us a picture on our website. We will be pleased to offer you advice.

It is also important to lubricate the hinges regularly. This can be done by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication will help the window operate and close more easily. It can also prevent corrosion and reduce the possibility of sticking. It is recommended to perform this every year. WD40 or other solvent-based oils are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by a few different factors. The hinges, also due to wear and tear could become misaligned. This causes gaps to develop where the sash meets the frame. These can be easily repaired by giving them good cleaning, but when they're beyond repair, it might be necessary to have them aligned or replaced. The second is the interlock, which is located on the hinge side of the window, can also become misaligned, again it may be possible to give them a good clean, but in some instances it could be necessary to have them replaced.

These seals can wear down or become damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity glass. This will help to regulate indoor temperatures and decrease the risk of draughts.

The final method to cut down on drafts effectively is to use a Draught-exclusion device. These are usually fabric tubes filled with a filler which can be hung over your window sill. They will keep your home warm by blocking out cold air.

The windows made of upvc can continue to provide excellent insulation and security to your home with a little regular maintenance and repairs. However, it is important to realize that all windows have a life span and there may come the point when it's more cost-effective to replace them rather than fix them. So, if you are having issues with your upvc windows, it is always recommended to seek help from a professional as soon as possible.