Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are easy to maintain and are durable and long-lasting. They are not susceptible to rot or rust like aluminum and timber.

It is essential to clean and oil UPVC windows and doors on a regular basis. This will help prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it could cause a large deal of damage to your home, which can make it very dangerous and potentially fatal. You should take the time to ensure that your windows are in good working order.

Single-pane windows are relatively easy to replace, and they will usually fit into the old frames very easily. If you have double-paned windows which are held together by internal beading, it will be harder to remove and replace the old panes. In this instance you'll need to source some plastic spacers that will assist the new pane to fit perfectly into the frame of the window.

Wearing protective eyewear and thick gloves is a must for anyone who plans to remove the glass by yourself. It is also an excellent idea to lay down a drop cloth before you start working on the glass to ensure that any shards fall onto the cloth rather than on the floor where they can be trampled on and cause further damage.

It's a great idea to seal the gap after the glass is removed. This will prevent drafts and water from entering your property until a professional arrives to fix the window. This also serves as a barrier to prevent any intruders from making their way into your home. If the distance between the door and the window is large, you might prefer a security screen that also has a window. This will provide the best of both.

2. Sagging

Upvc windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows with sash. However, over time, they may be afflicted by a variety of issues, including sliding. A sagging window can cause problems with light, draughts or even security. If you find that your uPVC window is beginning to lose its shape, it's important to act quickly to prevent the problem from getting worse.

To repair a window that is sagging, you can try repositioning the hinges. To do this, you'll have to open the window to get to the frame. Then, using an screwdriver, take off the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've repositioned the hinges, shut your window and verify the fitting. If you're satisfied with the fit, tighten the screws to ensure that they remain in the right place.

If you aren't able to move the hinges, you may need to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, causing them to loosen. It is important to replace your seal as soon as you can in order to keep your uPVC window waterproof and draughtproof.

uPVC handles may also become loose. This is usually due to screws that have loosened over time, but it could also be caused by the handle mechanism getting worn out. It's fairly simple to fix a loose uPVC handle. The first step is to close your window replacement near me and do an initial test fit. The joint at the corners of the sash should align with the joint on the casing. If it does not, you can use the screwdriver to loosen up the handle. Then turn the mechanism to position.

3. Water Leaks

It is important to take action if wake up every morning to find mouldy walls and floors that are wet. The leaks of water through windows could cause structural damage to your home and impact your ability to regulate the temperature in your home. The most common reason for leaking uPVC windows is that the sealant surrounding the frame has been damaged or missing.

This is an easy fix that can be accomplished by any DIYer who is competent. Depending on how severe the problem is, the old caulking might need to be removed. When it is time to uPVC repair, you should be careful not to over-caulk. This will only make your window harder to clean and lower its energy efficiency.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan is placed correctly so that it drains away from the window. In more serious instances, you might have to consider replacing the window.

Other signs of long-term water leakage include rotted sills and the appearance of black spots of mold on the walls near the window. This fungus thrives under conditions of dampness and can spread quickly throughout the house.

It is also important to note that if the leak is coming from between the glass of your double glazing glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sliding. This can be easily corrected by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and open in a breeze It could be hinges that are at fault. They can be repaired by any skilled DIYer and can be done within a few minutes.

Like all mechanical parts, hinges can be damaged over time. Changing a window hinge is essentially a very simple procedure, but it is easier if you have someone to help you hold the frame in place.

It is also important to ensure that the uPVC hinges are being opened and closed in the right direction. Look for the arrows on each hinge to determine which way the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window in a certain way or by inadequate installation at the factory. Sending us photos via our website will often resolve the problem. We are happy to offer assistance.

Regular lubrication of hinges is also essential. This can be accomplished by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can allow the window operate and close more easily. It can also lower the chance of windows sticking and prevent corrosion. It is recommended to do this at least once a year. WD40 and other solvent based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by various factors. The hinges can also become unbalanced due to wear, creating an opening between the frame and sash. This can be easily fixed by giving them a good clean, but in the event that they are beyond repair it could be necessary to get them aligned or replaced. Secondly the interlock, this is located on the hinge side of the window, can also become misaligned, again it may be possible to give them a thorough clean, however in some instances it could be necessary to get them replaced.

These seals are susceptible to wear and tear or be damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glass. This will help control indoor temperatures and decrease the possibility of draughts.

Another, and most effective ways to cut down on the draughts in your home is to use a draught excluder. These are typically made of fabric filled with some type of filler. They can be positioned on the top of your windowsill. They will keep your home warm by blocking cold air.

With a little regular maintenance and repairs windows made of upvc will provide a great level of insulation and security for your home. However, it is important to realize that windows last for a certain period of time and they may reach the point when it's more cost-effective to replace them rather than fix them. If you are experiencing problems with your upvc windows, it is always recommended to seek assistance from a professional immediately.