Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber, they don't rust or rot.

It is essential to clean and oil UPVC doors and windows on a regular basis. This will reduce repair costs as well as improve energy efficiency.

1. Broken Glass

The broken glass in your windows could cause significant damage to your home, and could even be fatal. It is crucial to take the time to ensure that you're doing everything you can to ensure that your windows are in good shape.

Single-pane windows are relatively easy to replace, and they will usually fit into the frames of the past easily. If windows with double panes are held together by internal beading, it will be harder to remove and replace the panes that were previously in use. In this situation you'll need to source some plastic spacers that will assist the new pane to fit correctly into the window frame.

If you're planning to attempt to remove the window panes yourself it is important to wear appropriate safety gear such as gloves that are thick and protective eyewear. You should also lay down a drop cloth before you begin working on the window panes to ensure that any shards of glass fall onto the fabric and not on the floor, where they could be trampled under.

It's a good idea to tape the gap once the glass is removed. This will prevent drafts and water from getting into your property until a professional is able to fix the window. It also acts as a barrier, window repairs preventing any intruders from gaining entry into your home. If the distance between the door and the window is substantial, you may prefer a security screen that also includes an opening. This will provide the best of both.

2. Sagging

uPVC is durable, energy-efficient and affordable alternative to timber sash window. In time, they could be affected by a variety of issues such as sagging. A sagging window in upvc window repairs can cause problems with light, draughts and even security. It's crucial to act immediately if you realize that your uPVC windows are sliding.

To fix a window that is sagging you can try repositioning the hinges. You'll first need to open the windows to reach the frame. Then, you can remove the top and bottom hinges using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Once you've adjusted the hinges, close your window and verify the fit. If you're happy with the fit, you can tighten the screws to ensure that they stay in place.

If you are unable to reposition the hinges, you may need to replace the seal. Rubber seals may dry out and lose their elasticity over time, which causes them to loosen. If this happens, it's crucial to replace the seal as soon as you can to ensure that your uPVC windows are watertight and draught-proof.

UPVC handles can also become loose. The majority of the time, this is caused by screws that have come loose over time. However, it can also happen because the handle mechanism has worn out. It's relatively simple to repair a loose uPVC handle. First, you'll need close the window and then perform a test to ensure that it fits. The joint at the corners of the sash should align with the joint on the casing. If it doesn't, you can use the screwdriver to loosen the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

If you're waking up to wet floors and damp walls each time it rains, it's crucial to take action. Windows that leak water do are not just a cause for degrading of the structure of your home but also hinder your efforts to regulate the temperature inside your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is a relatively easy fix that can be completed by any DIY expert. Based on the severity of the problem the caulking used previously may need to be removed before a new layer of caulk is applied. It is important to keep in mind that when it is about uPVC window repairs, do avoid the temptation to "over-caulk in order to make the area harder to clean and reduce your energy efficiency.

It is important to check that the drainage holes are clear of debris and that the sill pan is angled correctly so that it drains away from the window. In more serious cases you might need to consider replacing the window.

Other indicators of long-term water leakage are decayed sills and the appearance of black spots of mold on the walls near the window glass repair near me. This fungus thrives in conditions of dampness and can spread quickly throughout the house.

It is also important to keep in mind that if the leak originates from the glass of your double-glazed windows it may be more likely to be an issue with the glass seal, rather than the frame or sagging. A uPVC specialist can fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open, or if it opens with the breeze. Anyone with the skills to fix them can replace these in a matter of minutes.

Nearly every home in the UK will have top-hung or side-hung uPVC windows that have hinges and, just like any mechanical component they can wear down over time. It is very easy to change a window hinge but it's much easier if someone helps hold the frame.

It is also worth checking that the uPVC hinges are opening and closed in the correct direction. You can check this by looking for the arrows on each hinge. This shows which way the window should open.

The issue could be caused either by opening the window improperly or a faulty installation at the factory. Sending us a picture via our website will often solve the issue. We are happy to provide assistance.

Regularly lubricating hinges is also essential. Applying a light engineering lubricant on the hinges is a great method to accomplish this. We suggest using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also stop corrosion and decrease the chance of sticking. This must be done at a minimum every year. WD40 or other solvent-based lubricants should not be used since they could damage your uPVC windows.

5. Draughts

Draughts can be caused by several different factors. The hinges can also become misaligned due to wear, creating a gap where the sash and frame meet. This can be easily repaired by giving them a thorough clean, however when they're beyond repair, it may be necessary to get them re-aligned or replaced. Secondly the interlock, this is located on the hinge of the window, may be misaligned. Again, it may be possible to just give them a good clean, but in some cases it might be necessary to get them replaced.

These seals can wear down or become damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity glasses. This will help control indoor temperatures and lessen the possibility of draughts.

Another, and most effective ways to reduce draughts is by using a draught excluder. These are typically made of fabric which are filled with a sort of filler and can be positioned on the windowsill on top. They will keep your home warm by blocking cold air.

With a little regular maintenance and repairs windows made of upvc will provide a great level of insulation and security for your home. However, it is important to realize that all windows have a lifespan and they may reach the point when it's more economical to replace them than fix them. If you encounter any issues with your window made of upvc it is recommended to speak with an expert as soon as you can.