Double Glazed Window Repair

It's worth looking over the warranty included with the majority of double-glazed windows. It usually covers issues with window hardware, like hinges and locking mechanisms in the first ten years.

A leak in the seal is usually the cause of mist between your glass windows. This needs to be repaired immediately to avoid mold or damp growing in your home.

Condensation Between the Windows

If condensation forms between windows in your home, it is an indicator that the seal securing the gas that is used to insulate between the panes has failed. This is a serious problem that should be addressed promptly, especially in the winter months when humidity levels are at their highest. This can also cause damage to the sills or sealants and also cause mould.

Double-glazed windows should not have condensation between the panes. However, it's not common to have extreme humidity or a cold snap to trigger this issue. Fortunately, it is repaired without replacing the entire window. A professional can make small holes in the glass and then spray the inside of the window with a specific cleaning solution. The water is then removed from the window. An anti-fogger can be installed to stop the build-up of moisture in the future.

Condensation between windows can also occur due to air leakage or fitters other factors outside of the window. If this is the scenario, it's likely to take longer for moisture to collect inside the window, since the air must be warm enough to allow the water molecules to evaporate. In these instances, it is better to replace double-glazed windows instead of trying to repair the sealed units.

Double-glazed glass windows are composed of two or more pieces of insulated tempered glass that are held together by a framework made of metal. The gap between the two windows is filled with an insulating gas, such as Krypton or argon, and then sealed. The seal is responsible for preventing the insulating gas from escaping and also prevents moisture and air from entering through the gap.

As windows age, seals get damaged and allow moisture to escape between the glass panes. It is crucial to recognize when seals are beginning to leak and this means that the double glazing is no longer functioning as well as it did in the past. This can lead to lower energy efficiency, increased heating costs, damage to the property and the risk of condensation forming between the windows.

Mist

It is normal to observe condensation on your windows. This means that your double glazing system is working well and is able to keep heat in your house. The condensation is caused by the outside air is hotter than the glass, and reaches the dew point of the window prior to the air inside. This is one of the major benefits of having good quality double glazing.

If the condensation is located on the inside of your window, it could be a sign of a ventilation issue in your home. The excess moisture won't go anywhere else and will end in the window, carpets, furniture, and other areas of your home. The process of having this examined by an expert and ensuring that there is plenty of fresh air flowing through your house will help to prevent it from happening in the future.

Another reason why mist appears on double-glazed windows is because the seal between two glass panes has been broken. This can be caused by wear and tear, or by using chemical cleaning solutions. If this occurs, the best option is to have the windows repaired in the shortest time possible.

Repairing your windows professionally will ensure that they are waterproof and free of fogging, condensation and misting. It's also cheaper than replacing the windows and you will save money on your energy bills.

A FENSA registered window installer can provide you with a quote for repair or replacement upvc door lock of your double-glazed windows. Upgrade your windows to energy-efficient A-rated ones when they are old.

It is a great idea to keep copies of any warranties or agreements with your window fitters. This will be very helpful if any problems with the windows develop in the future, and you then contact your fitters to resolve the issues. This is a far better alternative to simply not addressing the issue, which will only get worse and could cause other issues in your home.

Close or open with difficulty

It's not just a nuisance when double-glazed windows are difficult to open or close. They can cause higher energy bills because of heat loss and draughts. It could also be a security issue especially when the locks aren't functioning properly. It is recommended to fix double-glazed windows and doors as soon as you can.

If you are unable to open your window and you've tried the most basic of solutions like using a screwdriver to pry it open or tapping around the frame using a sharp object, then the problem may be more serious. It could be that the window has shifted in its frame and needs to be set again or there is gaps between the glass panes as well as the frames. In either case you should seek out a double glazing repair specialist to ensure the repairs are done correctly and to prevent further problems.

It's not common for new upvc door window handles and lock mechanisms to become stuck or difficult to operate, especially when they are worn and old. This is caused by a build up of grease or dirt inside the handle. This can be cured by cleaning it with a uPVC cleaner. If this does not work, you can try tapping the uPVC using a screwdriver. Be careful not to scratch the handle or the window handle mechanism.

If this does not solve the problem, the window will need to be replaced as the hinges might not be in the correct position or the locking mechanism might have been damaged. In this situation, you should contact an upvc window repair window specialist.

David The Window Wizard specialises in all technical aspects of double-glazed repair of doors and windows, fitters including fixing a jammed or shut double glazed window. He has a lot of experience in converting older window mechanisms into modern ones. This can save you money on replacing the entire window. Call or email us now for more information or a no-cost quote.

Warping

Double-glazed windows are usually a great option for saving energy in your home. They are made up of two distinct panes, with a spacer gas or air between the panes. This creates an airtight seal that keeps cold air out and warm air in. However, over time windows can become damaged or broken and require repair. The majority of these repairs can be made without having to replace the entire window.

One of the most common issues double glazed windows experience is warping. The windows begin to bow or twist or bow. This can affect the structural integrity and insulating capabilities of the window. The best way to prevent this problem is to ensure that your double glazed windows are properly installed and maintained regularly.

If your double-glazed windows are beginning to swell, it's essential to speak with a professional immediately to stop the issue from becoming worse. They will be able to inspect your windows and determine the cause of the warping. They will then use specific tools to correct the issue and make sure that your windows are sealed.

A common cause for this issue is the presence of water vapour that is trapped between the windows, which can build up over time. It can be caused by many different reasons, such as the weather, humidity and temperature changes. To remedy this, the specialist will drill a small hole through the window to release the moisture. They will then use an agent for cleaning to wash the glass and apply a sealant to help keep it dry in the future.

If your windows cannot be shut or opened, it could be due to a malfunctioning mechanism or hinges. Before calling an expert to resolve the issue, it's worth lubricating these parts. This can usually fix the issue and decrease the need for replacements. If your windows are very old or do not provide the insulation you'd like to see it is usually better to replace them.