Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they are not susceptible to rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will help avoid unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

If the glass in your window is broken it can cause a huge deal of damage to your home, which can make it extremely dangerous and possibly fatal. You should take the time to make sure that your windows are in good shape.

For single pane windows it can be relatively simple to replace them, and the replacement is usually able to fit into the frame that was previously installed easily. If windows with double panes are joined by internal beading, it is more difficult to remove and replace the old panes. In this case it is essential to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

If you plan attempt to remove the window repairs panes by yourself it is crucial to wear appropriate safety gear, including thick gloves and protective eyewear. You should also lay down a drop cloth before you begin working on the window panes so that any shards of glass fall onto the fabric and not on the floor, where they could be trampled under.

Once the glass is removed and the glass is removed, it's a good idea to cover the gap with packaging tape or duct tape to prevent water and drafts from getting into the property until a professional can come out and repair the window. It also acts as a barrier, deterring any intruders from getting access to your home. If the gap is large, you might want to consider using the security door with an integrated window, since it will provide the best of both worlds.

2. Sagging

Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash windows. However, over time, they may be afflicted by a variety of issues, including sliding. A window that isn't properly aligned can cause problems with light, draughts, and even security. It is crucial to act when you realize that your uPVC windows are sagging.

Repositioning the hinges could aid in fixing a window which is sliding. To accomplish this, you'll need open the window to access the frame. Then, remove both the hinges at the top and bottom using a screwdriver, and then adjust them counter-clockwise or clockwise. Once you've adjusted the hinges, shut your window and verify the an appropriate fit. If you're happy with the fit, you can tighten the screws to ensure they remain in the right place.

If you are unable to reposition the hinges you may need to replace the seal. Rubber seals may dry out and lose their elasticity over time, causing them to loosen. It is crucial to replace your seal as quickly as you can to ensure that your uPVC window waterproof and draughtproof.

uPVC handles may also loosen up. This is usually due to screws that have been removed over time, but it can also be due to the handle mechanism wears out. It's a good thing that it's simple to fix a loose uPVC window handle yourself. The first step is to close your window and do an experiment fit. The joint at the corner of the sash should be aligned with the joint on the casing. If it isn't then you can make use of a screwdriver to loosen the handle and then turn the mechanism back into its original position.

3. Water Leaks

It is essential to act if you wake up every morning to find a smoky wall and floors that are wet. Leaks of water from windows can cause structural damage to your home and also impact your ability to regulate the temperature inside your home. The most common cause for leaks in uPVC windows is that the sealant around the frame is either damaged or missing.

This is an easy fix that can be done by anyone who is a DIYer with the skills. Depending on how serious the issue is, the old caulking may need to be removed. It is important to remember that when it comes to uPVC window repairs, do not be tempted to apply too much caulk and then make the area harder to clean and can reduce the efficiency of your energy.

Make sure that the drainage holes have no debris in them, and also that the sill pan is properly angled to drain away from the window. In more serious instances, you may need to replace the window.

Mold spots and rotten sills are another sign of water leakage. This fungus thrives in conditions of dampness and can spread quickly throughout the house.

It is also important to keep in mind that if the leak originates from the glass of your double glazed windows, it's more likely to be an issue with the glass seal rather than the frame or sliding. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open, or if it opens in the breeze. These are easily repaired by any skilled DIYer and can be done within a few minutes.

Nearly every home in the UK will have top-hung or side hung uPVC windows that use hinges and, like all mechanical parts, they can wear down over time. The process of replacing a hinge on a window is essentially a very simple procedure, but it is simpler if you have someone to assist in holding the frame up.

Make sure that the uPVC hinges open and close in the right direction. You can check this by looking for the arrow on each hinge, this indicates which way the window should be opened.

The issue could be caused either by opening the window repair near me incorrectly or a faulty installation in the factory. It is usually possible to fix the issue by sending us a photograph through our website and we will be more than happy to give you advice.

It is also crucial to lubricate the hinges on a regular basis. Applying a light engineering lubricant on the hinges is an ideal method of doing this. We recommend using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can help the window operate and close more easily. It also decreases the chance of windows sticking and help prevent corrosion. This should be done at least every year. WD40 and other solvent-based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a variety of different things. First, the hinges due to wear and tear may become displaced, which causes an opening to appear between the sash and the frame. They can be repaired by giving them good clean, but in the event that they are beyond repair it may be necessary to get them re-aligned or replaced. Secondly the interlock, this is located on the hinge side of the window, can be misaligned. Again, it is possible to just give them a good clean, but in some instances it could be necessary to have these replaced.

The next common reason for draughts is window seals, these can become worn down or damaged over time and allow air to escape through these gaps. Replacement of these with high-quality weatherstripping is a good way to stop draughts. Another alternative is to replace the window with low-emissivity glass, this will help in regulating indoor temperatures and again will lessen the risk of draughts.

The final method to cut down on the amount of draughts is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler which can be hung over your window sill. They can help keep cold air out and keep your home warm and cozy!

With a bit of regular maintenance and repair windows made of upvc will provide a great level of security and insulation for your home. It is important to remember that all windows will eventually get worn out and it could be more cost-effective to simply replace them than to repair them. If you encounter any issues with your window made of upvc, it's best to consult an expert immediately.