Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are easy to maintain and are durable and long-lasting. They do not get rotten or rusty like aluminum or timber.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will prevent unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it could cause a large amount of damage to your home, which can make it very dangerous and potentially fatal. It is crucial to take the time to make sure that you're doing everything you can to ensure that your windows are in good condition.

Single-pane windows are relatively easy to replace and generally fit into frames that were previously in use very easily. However when you have double-pane windows that are anchored by internal beading, it'll be more difficult to get rid of the existing panes and install new ones. In this instance it is essential to buy plastic spacers to aid in fitting the new pane into the window frame.

If you are going to try to remove the window panes yourself, it is essential to wear the appropriate safety equipment such as gloves that are thick and protective eyewear. It is also recommended to lay down a dropcloth before you start working on the glass so that any fragments of glass fall onto the cloth instead of onto the floor, where they could be trampled on and cause further damage.

It's a great idea seal the gap after the glass has been removed. This will keep drafts and water from entering your property until a professional is able to repair the window. It also acts as an obstacle to stop intruders from making their way into your home. If the distance between the window and the door is significant, you may want to use a security screen that also includes an opening. This will provide the best of both.

2. Sagging

uPVC windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber sash windows. However, over time they can suffer from a variety of problems including sliding. A window that isn't properly aligned can cause problems with light, draughts, and even security. It is crucial to act immediately if you discover that your uPVC windows are falling down.

To fix a window that is sagging you can try repositioning the hinges. To accomplish this, you'll need open the window so that you can access the frame. Then, using an screwdriver, take off the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, close the window and test it for fitting. If you're happy with the fit, tighten the screws to ensure they stay in the right place.

If you are unable to move the hinges, you might have to replace the seal. As time passes, rubber seals lose their elasticity and dry out and cause them to loosen. If this happens, it's crucial to replace the seal as soon as possible to ensure your uPVC windows remain watertight and secure from draughts.

UPVC handles can also become loose. The majority of the time, this is caused by screws that have become loose over time. However, it can occur because the handle mechanism has worn out. It's relatively easy to fix a loose uPVC hand. You'll first need to close the window and do a test fitting. The corners of the sash should align with the casing joint. If it isn't then you can use a screwdriver or a wrench to loosen the handle, and then turn the mechanism back into position.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains, it is important that you take action. Windows that leak water do not only lead to the destruction of your home's structure but also hamper your efforts to control the temperature within your home. The most common cause for leaks in uPVC windows is that the sealant surrounding the frame is either damaged or not present.

It is a fairly easy fix that can be completed by any skilled DIYer. Depending on how serious the problem is, the old caulking may have to be removed. It is essential to remember that when it comes to uPVC window repairs you should not be tempted to 'over-caulk and then make the area harder to clean and could reduce the efficiency of your energy.

Make sure that the drainage holes have no debris in them, and also that the sill pan has been properly angled to allow the water to drain from the window. In more serious situations, you might need to consider replacing the window.

Moldy sills and rotten ones are also signs of water leakage. The fungus thrives in conditions of dampness and can spread quickly throughout the home.

If the leakage is occurring between the double glazing repairs near me-glazed glass it is more likely that the problem is with the seal than the frame. A uPVC specialist can easily solve this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window is difficult to open or it blows open with an ease. Any competent DIYer can replace these in a matter of minutes.

Like any mechanical part, hinges can wear out over time. It is very easy to replace a hinge on a window but it's much simpler if you have someone to help you hold the frame.

It is also important to ensure that the uPVC hinges are being opened and closed in the correct direction. This can be done by looking for the arrow on each hinge, this shows which way the window should open.

The problem with the hinges on windows could be the result of incorrectly opening the window a certain way or by poor installation at the factory. This issue can be fixed by sending us a picture through our website and we will be pleased to offer you advice.

Regular lubrication of the hinges is essential. Applying a light engineering lubricant to the hinges is a great method to accomplish this. We recommend using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window to open and close more easily. It can also reduce the possibility of a window getting stuck and stop corrosion. Ideally, you should do this once a year. WD40 or other solvent-based oils should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by different causes. The hinges can also be disaligned as a result of wear, causing an opening where the sash and frame meet. If they are damaged beyond repair, it may be required to realign them. The second is the interlock, which is located on the hinge side of the window and can be misaligned. Again, it may be possible to just give them a good clean, but in some instances it could be necessary to have them replaced.

The second most frequent cause of draughts is the window seals. They are prone to wear or damaged over time and allow air to escape through these gaps. Replacing these with high-quality weatherstripping is a good way to keep draughts at bay. Another alternative is to replace the upvc window with glass that is low-emissivity, this will help to regulate indoor temperatures and again will reduce the possibility of draughts.

One of the most effective ways to cut down on draughts is by using a draught excluder. These are usually fabric tubes that are filled with some type of filler. They can be placed on top of your windowsill. They can keep your home warm by blocking out cold air.

The windows made of upvc can continue to provide excellent insulation and security for your home with a little regular maintenance and repairs. It is essential to remember that all windows will eventually get worn out and it is cheaper to replace them than to repair them. So, if you are experiencing problems with your upvc windows, it is always recommended to seek assistance from a professional as soon as you can.