Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are long-lasting, durable and easy to maintain. They are not susceptible to get rotten or rusty like timber and aluminum.

It is important to clean and oil UPVC doors and windows regularly. This will reduce repair costs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows could cause significant damage to your home and even be fatal. It is important to make sure that your windows are in good condition.

Single-pane windows are fairly simple to replace and will usually fit into the old frames very easily. However, if windows with double glazing panes are held in place by internal beading, it'll be more difficult to take out the old panes and put in new ones. In this situation you'll need locate some plastic spacers that will help the new pane to fit properly into the window frame.

If you plan to try to remove the window panes yourself it is important to wear the proper safety gear that includes gloves with a thick layer of material and protective eyewear. It is also recommended to lay down a drop cloth prior to when you begin working on the glass to ensure that any shards fall onto the cloth instead of onto the floor where they can be trampled on and cause further damage.

Once the glass is removed and the glass is removed, it's a good idea to seal the gap with clear packaging tape or duct tape to stop water and drafts from entering the property until a professional is able to come out and fix the window. This will also act as a barrier, deterring any intruders from gaining entry into your home. If the distance between the window and the door is substantial, you may want to use a security screen that also includes an opening. This will give you the best of both.

2. Sagging

Upvc is a long-lasting and energy efficient alternative to timber sash windows. However, with time, they can suffer from a variety of issues, including sliding. A sagging window can cause problems with light, draughts or even security. If you find that your uPVC window is beginning to lose its shape, it's crucial to act fast to stop the issue from getting worse.

Repositioning the hinges can aid in fixing a window that is sagging. First, you'll need to unblock the windows to access the frame. Then, you can remove the top and bottom hinges using a screwdriver, and then adjust them clockwise or counter-clockwise. Once you've adjusted the hinges, close your window and check for an appropriate fit. If you're satisfied with the fit of the window, you can tighten screws to keep them in the right position.

If you cannot reposition the hinges, you might have to replace the seal. Rubber seals may dry out and lose their elasticity over time, which causes them to loosen. If this happens, it's important to replace the seal as fast as you can to ensure that your uPVC windows are waterproof and secure from draughts.

uPVC handles may also become loose. This is typically caused by screws that have loosened over time, but it can be caused by the handle mechanism wearing out. It's fairly simple to fix a loose uPVC handle. First, you'll need to close your window and do an initial test to ensure that it fits. The corner joints of the sash must align with the casing joint. If it doesn't, you can use a screwdriver to loosen the handle, and then reverse the mechanism back into its original position.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains it's important to take action. The leaks of water from windows do are not just a cause for destruction of your home's structure but also undermine your efforts to regulate the temperature within your home. The most common cause for leaks in uPVC windows is that the sealant surrounding the frame has been damaged or not present.

This is a relatively easy fix that can be done by any competent DIYer. Depending on the severity of the issue is, old caulking may have to be removed. It is crucial to remember that when it comes to uPVC window repairs you should not be tempted to apply too much caulk in order to make the area more difficult to clean and reduce the efficiency of your energy.

Verify that the drainage holes are free of debris inside them and that the sill pan has been properly angled to drain away from the window. In more severe instances, you may need to replace the window.

Other indicators of long-term water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. This is a fungus that thrives in damp conditions and is able to quickly spread throughout the house.

It is also important to note that if the leak is coming from between the glass in your double glazed windows it may be more likely to be a problem with the glass seal rather than the frame or sliding. Again this can easily be repaired by an uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or slack and open with ease It could be hinges at the fault. These are easily replaced by any competent DIYer and can usually be completed in a matter of minutes.

Like all mechanical parts hinges are prone to wear out over time. It's easy to change the hinges on a window but it's much easier if someone helps hold the frame.

It is also important to ensure that the uPVC hinges are opening and closed in the correct direction. Check for the arrows on each hinge to determine which way the window should be opened.

The problem with the hinges on windows could be caused by improperly opening the window a certain way or due to poor installation at the factory. This issue can be fixed by sending us a photograph through our website and we will be more than happy to give you suggestions.

It is also crucial to grease the hinges on a regular basis. This can be done by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regularly lubrication will help the window to operate and close more easily. It can also lower the risk of a window getting stuck and stop corrosion. The ideal time to perform this every year. WD40 and other solvent-based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by different things. The hinges can also become unbalanced due to wear, creating an opening between the frame and sash. If they are beyond repair, it may be necessary to get them re-aligned. Secondly the interlock, this is located on the hinge of the window and can be misaligned. Again, it is possible to give them a thorough clean, however in some instances it could be necessary to get them replaced.

These seals can wear down or be damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glasses. This will help control indoor temperatures, and reduce the possibility of draughts.

Another, and most effective ways to cut down on drafts is to use a draught excluder, these are usually fabric tubes which are filled with a type of filler. They can be put on top of your windowsill. They will help stop cold air from entering and keep your home warm and cozy!

With a little maintenance and repairs windows made of upvc will provide a great level of security and insulation for your home. However, it is important to realize that all windows have a lifespan and they may reach a point where it is more economical to replace them than repair them. So, if you're having issues with your upvc windows, it's best to seek professional assistance as soon as possible.