Double Glazing Seal Repairs

If the seals on double-glazed windows are damaged, they can cause damp and mould. This can cause damage to the frame and the walls surrounding it, in addition to affecting your health.

Fortunately, the majority of uPVC windows can be repaired using sealing and resealing instead of replacing. A glazier can clean the frame and glass of the window, apply a new bead and smooth it.

Water Leaks

Window seals are designed to keep moisture out of your home. As they wear out, water may get into your windows. A window doctor; see this, that leaks isn't only a nuisance but can cause significant damage to the structure of your home. It is essential to recognize an issue early and have it fixed by an expert before it gets worse.

The cause of windows that leak can often be found not in the glass itself but on the frame or sill. A leak in this area is the most common indication of a damaged window seal. It may be caused by damage to the window seal from weather or aging, worn-out caulking or even an obstruction in the drainage area resulting in a build-up of ice or water.

Water appearing between the double-glazed panes is another common indication that your window seal is failing. It's not as risky as a leak from water, as the water does not travel far enough to reach into your home. It does mean, however that the inert gases that are sandwiched between your panes have leaked out. This can lower the insulation value of your window.

The final common indication of a failing window seal is condensation between the panes. This may be caused by a failed window seal, or it could be the result of a damp climate in your home or a problem with the glass. The condensation may not only be unpleasant, but it could also cause the growth of mold and mildew within your home, which is very difficult and expensive to eliminate.

If you're seeing these indicators, it's the time to have an inspection of your double glazed windows. Repairs or replacements will ensure your home is protected from water leaks, lower energy bills, and stop drafts. It's a small price to pay for the security and comfort of your family. Contact Thompson Creek Window today to discuss your options for a window seal repair or replacement. Our experienced professionals are happy to assist you! We provide assistance to homeowners throughout the Mid-Atlantic region.

Condensation

A broken double glazing seal can allow water into the gap that is used to insulate. This can lead to condensation inside the window panes and may also result in misting or fogging.

If you notice condensation developing within your home, it's the perfect time to call a professional double glazing repair service. Condensation is a sign that the vacuum seal fabricated in the factory has failed and moisture is seeping into the gap between the insulated and non-insulated.

Condensation is caused by a range of causes, but most commonly by faulty sealants, gaskets or insulation in the uPVC frames of the windows. As a result there are different double glazing repair options, however it is essential that the seal you choose to replace is properly measured to ensure the perfect fit and water-tight seal.

Gaskets are usually made of polyurethane, which is a material that could be used to fill in gaps between double-glazed units. These are designed to last a long time however, they may degrade as time passes due to natural wear and tear and exposure to different temperatures and weather conditions throughout the year.

Over time the foam may shrink or crack, which results in a crack in the seal that allows moisture to get into those areas of your double-glazed windows. This not only creates condensation but it can also result in a loss of energy efficiency, which means that you're losing heat from your home to the outside air.

One option for fixing the issue is to have the windows resealed. This is not a sure fix as it will only remove the existing condensation, and not address the issues that are causing the double-glazed windows to leak or form condensate.

A professional who is able to provide an insurance-backed guarantee should replace your windows completely. If the company fails, you are still protected by insurance. It is important to remember that your replacement windows should be covered by a warranty of at minimum 10 years.

Misting

Verify that your double-glazing seals are in good working order as the fall season approaches. The damaged seals on your windows don't just affect the insulation properties of your windows, but can also cause condensation, mold and damp. To prevent further damage to your double-glazed windows, and to reduce energy costs It is important to address any problems as soon as possible.

A typical double-glazed window is made from two glass panes that are joined by an internal space that's filled with gas. The sealant layer on the outside fills the gap between upvc repair frames and the glass. This is vital to ensure the air-tight seal which keeps cold and warm air separate in your home, saving you the cost of heating. These seals can become damaged in time because of weather conditions, aging or poor installation. When this happens the encapsulation formula that makes your double-glazed windows so effective can begin to deteriorate.

If damaged or faulty seals are not repaired they can cause dampness and condensation, which could impact your health as well as the appearance of your window. The dampness and moisture can cause damage to ceilings, walls flooring, floors and other surfaces within your home. They can also cause allergens and irritants which are harmful to your health as well as the health of your family.

The most common problem that double glazing suffers from is misting that occurs between the panes. This occurs when moisture is able to get into the insulated area of your window. This can be difficult to fix without professional double glazing seal repair.

DIY solutions to this issue are available, however, we do not recommend them as they can be messy and cause damage to your windows. These methods involve drilling into your glass unit and then using chemicals to get rid of fog and condensation. This could lead to various problems, most notably exposing your windows to water damage which can ruin the unit altogether.

Professional glaziers have the equipment, skills and experience necessary to safely reseal uPVC frames. They can also give you lasting results. They can also offer advice on how to maintain your uPVC window to avoid problems in the future.

Draughts

A draft coming from your window indicates that the sealant could have broken down. It is recommended to repair it or replaced. This will stop cold air from entering your home, improve efficiency in energy use and lower heating bills and increase the comfort level and temperature control.

It is important to know that some draughts aren't caused by window seals but rather the gap between the bricks' frames. In some instances, it might be possible to fix this by caulking the gap. If this is not successful, the area will require resealing professionally.

If the sealant around the double-glazed window begins to degrade it allows water to enter and can lead to dampness or even mold in some instances. This can cause a negative impact on health and could be damaging to your property. If you notice any problems with water intrusion, you should address them as soon as possible. If your windows are still covered by a warranty It is worth checking to see if the company that sold them will cover the cost.

It is a good idea to check whether the windows are covered by a warranty. Certain companies offer lifetime guarantees and others offer 10 years. If your double-glazed windows fall under warranty, you should contact the company that sold them as soon as you can and let them know about any issues you're experiencing. Ideally, it is best to do this in person or via mail or email, to ensure that all information is documented and clear.

It is also worth noting that draughts can often be caused by defective hinges, rather than the absence of seals that are effective. The hinges are responsible for closing the window sash (the section that you open) but can become stiff as time passes if they're not regularly oiled. This can leave gaps between the sash and the frame which could let cold air in. This issue can be fixed by replacing these hinges without affecting window seals.