Choosing uPVC Replacement Window Handles

Many customers agree that Upvc replacement handles are simple to install and feel comfortable. However, it's important to know that the type of handle you pick is the one that's right for your window.

The step height is the most crucial factor. It is the distance between the handle and the frame or base. Other considerations include lockable mechanisms and styles.

Replacement parts

You can purchase a range of replacement handles made of upvc. They come in a variety of colours and styles so there's bound to be something to suit your existing windows. It's easy to impulse buy especially when the handle fails, therefore it's a good idea to take your time and check certain things prior to committing to purchasing a new one. First, you must be aware of the type of upvc handles you have and what the differences are between them. The table below lists the most popular handles so that you can find the right one to suit your window made of upvc.

Espag handles are the most commonly used and are commonly found on modern double glazing window replacement glazed windows. They are typically attached to the frame with two screws which screw in from above and below.

The spindle bar on the back may be of different in size, and will determine whether they are left-handed or right-handed. This is why it's essential to measure the current handle in order to make sure you're getting the right replacement.

The arm is secured to the frame with two bolts, similar to the Espag handle. However, the handle is curved at a low angle to ensure that it doesn't scratch your blinds. This is a great option for those who want the handle to blend in with your blinds and have upvc windows.

Cockspur handles look similar to Espag handles, but they have a nose that closes over a wedge which rests on the frame of the window. This kind of handle can be commonly used on older Upvc windows as well as some wooden windows.

Tilt and turn handles are usually found on casement windows and cost to Replace windows uk can be operated either by turning the handle or pressing at the top of the window. This opens the window from the inside and allows you to clean from outside without having to go out onto a ladder or climb over the fence. They're ideal for those who have limited mobility and enhance security and access to the home.

Tips and tricks

A lot of people will need to replace their uPVC window handles at some time. If this happens it's a good idea to know a few hints and tricks that will make the process go as smoothly as it can.

The first thing you should do is check what type of handle you have at home. Based on the type of handle and the locking mechanism, it could be necessary for you to replace the handle and lock. For instance, if shoot bolts (espag) and roller cams are seizing or jammed and sizing, you'll have to change them, as well as the handle itself.

Thankfully, the majority of uPVC handles are very similar and adhere to industry standard sizing, which makes replacing them a fairly easy process. First, you must remove the screws on the handles. These are usually pozidrive screws. Once the screws are removed, you will be able to dismantle the handle.

If you've got the handle split it is recommended to make an inventory of how much of the spindle extends from the base of the handle. This will allow you to determine the length of the spindle to determine an alternative handle. Simply measure the amount that the square peg sticks out of the bottom of handle.

This is especially important for inline uPVC window handles because they are always straight and can only open either left or right, and they won't operate in the middle. It's a good idea in the event that you're not certain of the kind of handle you have at your home to borrow a handle and check out how it functions.

You can also determine the handedness of a uPVC window by watching how the handle rotates when it is used. Handed handles can be rotated clockwise or counter-clockwise. If you're unsure then you can always ask someone else to open the window using the handle, and work out how it operates in this way.

Find the spindle's measurement.

The selection of the right replacement handle for your windows could be difficult as not all handles are the same size. The spindle is what controls the locking mechanism inside the window and it is important to ensure that when installing a new handle, you measure the length of the spindle accurately to ensure it fits. There are several different types of uPVC window handles and they operate in different ways, so it is vital to know the type of handle you have and the type of locking system.

The spindle of the handle extends from the handle's rear and is attached to the lock gearbox within the window frame. When you turn the handle, it is then a way to turn the lock in the gearbox and opens the window. They are used on uPVC windows with casement and can be locked using keys to provide additional security.

Cockspur handles are commonly found in older double-glazed uPVC window frames. They have a "nose" that closes over a wedge shaped striker block. They are also fairly easy to install and can be locked using keys. It can be more difficult to replace these handles because they are less common than the espagnolette handles.

If you have a tilt-and-turn uPVC and you need a replacement handle with an alternative locking system. The handle can tilt the window and also allow it to be turned back and forth to fully open it. You must choose a handle with a spindle of at least 55mm in order to be able to reach the window frame.

You can use the same procedure to remove and replace this kind of uPVC handle, however you'll need to be cautious when you remove the old one. It might be necessary to open the window wider than normal to reach both screws that attach it to the frame. Once you have put in your new uPVC handles and checked that they are in the right position then tighten the screw covers and test the lock to ensure it works properly.

Install the new handle

Once you have the right handle replacement it can be screwed into the right place. This requires a screwdriver but might be easier using an electric one. It is essential not to overtighten the screws before screwing them into. This could cause the handle or knob cost to replace windows uk become warped.

The second step in installing the handle is to install the spindle. The spindle is a part which runs through the handle to control the locking mechanism of the window. It is essential that the component is properly fitted to permit the window to be opened and closed securely.

There are many different types of uPVC handles. These include:

Espagnolette Handles are handles inline which can be used to open tilt windows and turn them.

Cranked Espagnolette Handles: These are similar to inline handles but have a curved shape which is ideal for hard-to reach windows.

Tilt and Turn Handles These are used on tilt and turn windows for operating the opening and closing mechanisms.

The majority of uPVC window frames are fitted with these. They are often called 'Bay Windows' in the UK.

If your uPVC window handle is broken, it can be very frustrating. However, there is no need to replace the entire uPVC window just because of a damaged handle. There are a number of simple ways to fix and replace a broken uPVC window handle.

You can fix your broken window handle quickly by identifying the model and determining the spindle. When working with tools and windows it is essential to consider safety first. But, this is a relatively easy task. It could make the difference between having a safe and secure home, or an insecure open window! Bridgewater Glass is the place to go if you're in need of help or would like to speak to an expert about replacing your window handle. We have a team of highly experienced and knowledgeable professionals who are able to help with any issues you might be experiencing.