Repairs to uPVC Windows

uPVC is a great option for modern homes. They are durable, long-lasting and easy to maintain. They are not susceptible to rot or rust like timber and aluminum.

It is important to clean and oil UPVC windows and doors regularly. This will prevent unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large deal of damage to your home, which can make it extremely dangerous and possibly fatal. You should take the time to ensure that your windows are in good condition.

Single-pane windows are fairly simple to replace and will usually fit into the old frames very easily. If you have double-paned windows that are held together by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this instance, you will need to locate some plastic spacers that will aid the new pane in being able to fit properly into the frame of the window.

If you are going to try to remove the window panes yourself, it is essential to wear the proper safety gear that includes gloves with a thick layer of material and protective eyewear. You should also lay down a drop cloth before you begin working on the window panes, so that any shards fall onto the fabric and not on the floor and could be trampled under.

It's a good idea to cover the gap with tape after the glass is removed. This will stop water and drafts from entering your home until a professional comes out to fix the window. It also acts as a barrier, deterring any intruders from getting access to your home. If the gap between the door and the window is large, you might prefer a security screen that also includes an opening. This will provide the best of both.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash windows. Over time, they can develop a number of problems, including sliding. A sagging window can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to sag it is important to act swiftly to stop the issue from worsening.

To fix a sagging window you can try repositioning the hinges. You'll first need to open the windows so you can access the frame. Then, you can remove the top and bottom hinges using a screwdriver, and then adjust them counter-clockwise or clockwise. Close your window to check the fit after having repositioned your hinges. If you're satisfied with the fit, you can tighten the screws to ensure they stay in position.

If you are unable to reposition the hinges, you might have to replace the seal. Over time rubber seals can lose their elasticity and become dry which causes their tightness to decrease. If this happens, it's crucial to replace the seal as soon as you can to ensure that your uPVC windows are waterproof and secure from draughts.

UPVC handles can also loosen up. This is typically caused by screws that have been removed over time, but it could be due to the handle mechanism getting worn out. It's relatively easy to fix a loose uPVC handle. First, you'll need to close your window and do an initial test to ensure that it fits. The joints at the corners of the sash must align with the joint on the casing. If it doesn't, you can use the screwdriver to loosen the handle. Then turn the mechanism into position.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains, it's important to take action. The leaks of water from windows do not only lead to the destruction of your home's structure but also hinder your efforts to regulate the temperature in your home. The most common reason for leaking uPVC windows is that the sealant around the frame has been damaged or not present.

It is a fairly easy fix that can be completed by any DIY expert. Based on the severity of the problem the old caulking might need to be removed before a new layer of caulk is applied. It is crucial to keep in mind that when it comes to uPVC window repairs, do not be tempted to 'over-caulk in order to make the area harder to clean and reduce the efficiency of your energy.

Check that any drainage holes are free of debris in them and that the sill pan has been properly angled to allow the water to drain from the window. In more serious situations, you may have to replace the window.

Other signs of long-term water leakage include rotted sills and the appearance of black spots of mold on the wall near the window repairs. This fungus thrives under damp conditions and can spread quickly throughout the home.

If the leakage is occurring between the double glazed window repairs near me-glazed window, it is more likely that the problem is with the seal rather than the frame. It is also possible to be corrected by an uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open or it opens with a breeze. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Nearly every home in the UK will have top-hung or side hung uPVC windows that are hinged and like any mechanical part they can wear down over time. It's easy to change a window hinge however it is simpler if you have someone to help hold the frame.

Check that the uPVC hinges are closed and open in the right direction. You can do this by looking for the arrow on each hinge. This shows which way the window should open.

The issue can be caused by opening the window improperly or a faulty installation in the factory. This issue can be fixed by sending us a photo via our website and we will be pleased to offer you suggestions.

Regular lubrication of the hinges is also necessary. This can be accomplished by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication makes the window easier to open and close. It also decreases the possibility of a window getting stuck and stop corrosion. It is recommended to perform this every year. WD40 and other solvent based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by various factors. The hinges can also become misaligned due to wear, creating gaps where the sash and frame meet. They can be repaired by giving them a good cleaning, but when they're beyond repair, it could be necessary to have them re-aligned or replaced. In addition, the interlock could be unbalanced. This is located on the hinge's side, and may need to be cleaned. In certain instances, it may be necessary to replace them.

These seals are susceptible to wear and tear or become damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity glasses. This will help to regulate indoor temperatures and lessen the possibility of draughts.

Lastly, one of the most effective ways to cut down on draughts is by using a draught excluder. These are typically made of fabric which are filled with a type of filler. They can be put on the windowsill on top. They will keep your home warm by blocking cold air.

Your windows made of upvc will keep providing excellent insulation and security for your home by performing regular maintenance and repairs. It is crucial to recognise that all windows have a life span and there may come an point at which it is more efficient to replace them than repair them. If you have any problems with your upvc window, it's best to consult a professional immediately.