Double Glazed Window Repair

It is worth looking into the warranty included with the majority of double-glazed windows. In general, it covers issues with the hardware of the window such as hinges and locking mechanisms in the first 10 years.

A break in the seal can be the cause of mist between your glass windows. This should be fixed immediately to avoid mould or damp forming within your home.

Condensation Between the Windows

If condensation forms between the windows in your home, it's an indication that the seal that holds the gas that is used to insulate between the panes has failed. This is a serious issue that should be addressed immediately, particularly in winter, when humidity levels are at their highest. It could cause damage to the sills and sealant, and may cause mildew or mould.

Ideally double-glazed windows shouldn't be able to experience condensation between the panes. This problem is often caused by excessive humidity or a particularly cold snap. The issue can usually be resolved without the need to replace the entire window. A professional can drill tiny holes into the glass and spray the inside of the window with a specific cleaning solution. The moisture is then taken out of the window, and an anti-fogger device can be installed to stop any further buildup of moisture in the future.

Condensation may also occur between the windows as a result of air leakage, or other factors outside the window. In this instance it can take a longer time for the condensation in the window to build up because the air must be warm enough to vaporise the water molecules. In these cases it is recommended to replace the double glazed windows rather than trying to repair the seals on the existing units.

A double-glazed glass window comprised of two or more pieces of insulated tempered glass, which are joined by a framework made of metal. The space between the windows is filled with an insulating gas like Krypton or argon, and then sealed. The seal stops the insulating gases from escaping and also blocks air and moisture from entering the gap.

As windows age, seals can get damaged and allow moisture to escape between the glass panes. If the seals begin to leak it is essential to notice this because it means that the double glazing isn't performing the way it did in the past. This could lead to poor energy efficiency, increased heating bills, damage to the properties and the risk of condensation between the windows.

Mist

If you have condensation on the outside of your windows, this is totally normal - it means that your double glazing is functioning properly and retaining the heat in your home. The condensation is caused by the air outside is hotter than the glass, and it reaches the dew point of the window earlier than the air inside. Double glazing of high quality is a fantastic method to achieve this.

If the condensation is located on the side of your window, this can be a sign of a ventilation problem in your home. This is because the excess moisture isn't going anywhere and ends up on your window as well as in carpets, on furniture, and in other areas within your home. This can be avoided by having it examined by an expert and ensuring that there is sufficient fresh air in the house.

Another reason for mist on double-glazed windows is that the seal between two panes of glass is broken. This could be due to wear and tear or chemical cleaning solutions that are being used. The most effective solution is to get the windows repaired as soon as you can.

The professional repair of your windows will ensure that they are waterproof and free of fogging, condensation and misting. It's also cheaper than replacing the windows and you'll save money on your energy bills.

A registered window installer with FENSA can provide you with a price to repair or replace your double-glazed Windows. Upgrade your windows to energy efficient ones that are A-rated if they are very old.

It is a good idea to keep copies of any warranties or agreements with your window fitters. It will be helpful if you encounter any issues with your windows. Contact your window fitters to resolve the issue. This is better than ignoring the issue which could cause more problems for your home.

Close or open with difficulty

It's not just annoying when double-glazed windows are difficult to open or close. They could cause more expensive energy bills due to the loss of heat and draughts. It could also be a security risk, especially when the locks aren't functioning correctly. It is crucial to address any issues with double-glazed windows and doors when you discover them.

If you are unable to open your window and have tried the most basic of solutions such as using a screwdriver to prise it open, or tapping the frame with a tough object, the issue might be more serious. It could be that the window has moved in its frame and needs to be re-set or there is gaps between the glass panes as well as the frames. In either case, contact a double glazing repair upvc windows specialist to ensure the repairs are done correctly and to prevent further problems.

It isn't uncommon for UPVC window handles and lock mechanisms to get stuck or difficult to operate, especially when they are old and worn. It is usually caused by the accumulation of dirt or grease inside the handle. This is easily fixed by cleaning it using a uPVC cleanser. If this does not work, try tapping the uPVC with the screwdriver. Be careful not to harm the handle or window handle mechanism.

If this doesn't solve the issue, the window will need to be replaced as the hinges might not be in the correct position or the locking mechanism may have been damaged. In this situation, seek out a professional UPVC window repair expert.

David The Window Wizard specialises in all technical aspects of double glazed window and door repair, including fixing a jammed or shut double glass window. He has lots of experience in converting older window mechanisms into modern ones. This can save you money on replacing the entire window. Call or email us now for more information or a free estimate.

Warping

Double-glazed windows are typically the best option for saving energy in your home. They are made up of two distinct panes, with a spacer gas or air between the panes, which creates an airtight seal that keeps cold air out and warm air inside. However, over time, windows can be damaged or destroyed and require repair. Fortunately, the majority of repairs to upvc windows are easy and can be done without the expense of replacing the entire window.

One of the most common issues double-glazed windows encounter is warping. This occurs when windows begin to bow or twist, or bow. This can affect the structural integrity and insulating abilities of the window. Double-glazed windows must be properly installed and maintained to avoid this issue.

Contact a professional as soon as you notice that your double-glazed windows are sagging. This will help to stop the problem from becoming worse. They will be able to inspect your windows and determine the cause of the warping. They will make use of special tools to correct your issue and make sure that your windows are completely sealed.

A common cause of this issue is the presence of water vapour that is trapped between the windows, which can build up over time. It can be caused by various factors like weather conditions, humidity and temperature variations. To resolve this issue, the specialist will drill a tiny hole to release moisture. The specialist will use an agent for cleaning on the glass to clean it, then apply a sealant.

If your windows aren't able to be shut or opened, it could be due to a broken mechanism or hinges. Before calling an expert to resolve the issue, it's worth lubricating these parts. This can often resolve the issue and reduce the need for replacements. If your windows are worn out or do not provide the insulation you desire, it may be better to replace them.