Double Glazing Lock Repairs

Having quality locks on your doors and windows helps to prevent burglars from accessing your home. They generally don't like breaking glass or slipping through windows that are not closed.

However, some double-glazing owners have had issues with their door lock or window lock after it's been installed. These issues can usually be fixed without the need for a new double glazing repairs glazing.

Broken or damaged locks

A locksmith can repair your uPVC window or door lock if it is damaged or is not working properly. They can repair hinges, striker plates and locks for your double glazing. They can also adjust the cylinder to correct any misalignment that may be causing your handle not to operate correctly.

The mechanism might be jammed when the key is inserted into the lock, but it does not turn or become difficult for you to insert. Grease or dirt can get stuck in the mechanism. If this is the case, it may be possible to clean the lock and then lubricate it. It is important to apply a dry lubricant such as teflon or graphite instead of oil which attracts dirt and stick to the interior of the mechanism. After lubricating, insert the key into the lock and turn it. The lubricant should be absorbed into the mechanism, and the lock should turn easily.

A malfunctioning lock could be caused by loose screws in the lock mechanism. They may loosen and fall out or break completely and stop the lock from functioning properly. A screwdriver is a tool to tighten the screws but caution must be taken not to over-tighten them as this can cause damage to the internal components.

A faulty lock is dangerous for your family and you. This is especially the case if you have children. They can easily unlock the door without knowing and gain access to your house. If you are worried about this happening, a licensed locksmith can offer rapid and effective service to secure your double-glazed doors.

Misty Glaze are a professional uPVC and double glazing business in Lancing and can repair all kinds of damaged and broken mechanisms such as handles, cylinders, handles and lock systems for both uPVC windows and doors. We can also alter the locking system of your uPVC windows or double glazing to meet your needs. This means that replacement doors and/or windows are not always required.

Broken or Faulty Handles

As part of their overall security plan, many double-glazed windows come with a multipoint lock. This is an excellent option for those worried about criminals who are looking to gain access to your home. It is also a good idea to ask your installer about anti-lift blocks, these can be fitted with the existing locks and help keep your window firmly locked in a closed position.

Handle locks can be damaged or fail. They are the first component that criminals will use to force open your window. The good news is, this is one of easiest parts to fix.

Modern handles made of aluminium and uPVC operate a multi-point locking system called Espagnolette that is designed to resist forced entry. This security upgrade is usually available as an extra on new uPVC window installation. Older style uPVC and aluminium handles can be upgraded to shoot bolt locking systems also as an optional option on double-glazed window installations.

If a handle is damaged, it is essential to get the handle repaired as quickly as you can. Handles that are damaged can prevent the window from closing properly and also allowing drafts to enter. It may be a weakness that burglars who are opportunistic might exploit, placing your home and belongings at risk of theft.

The process of repairing the malfunctioning mechanism begins by opening the frame of the window and then removing the damaged handle. The gearbox that opens the handle is located and the model is identified, so that a replacement may be found that is in line with the profile of the internal window frame mechanism.

After the mechanism has been replaced the handle can then be re-attached with the original screws - but we would recommend replacing them with larger ones since this will provide the most secure fit. The final stage is to apply a coating of clear sealant to shield the handle from further rust. After that, your window will be functional again and at only a fraction of the cost of replacing the entire window.

Broken or damaged hinges

If your windows do not close correctly, draughts may enter your home, the security barriers will weaken and there's the risk of damp or water damage. Broken or damaged window hinges are a typical issue and can be repaired easily.

If you have a uPVC windows that won't close or open and close, it's likely that your hinges are broken or damaged and need to be replaced. Most window companies will require you to buy a new window unit to fix this simple issue, but we can replace the hinges in order to save you money.

Window hinges are usually damaged by repeated use, or weakened over time by corrosion. If you have a broken window hinge, it is crucial to take the necessary precautions to prevent further damage. This includes not causing the window to open or close.

You can find the right parts for your hinge by identifying its model. The most common types of window hinges are Maco, Mila, Roto and many other brands. It's best to consult an expert in this regard to ensure that you don't make the mistake of purchasing parts that are not compatible with your existing hardware and could cause further damage.

The hinges that are not working properly can cause major issue for your uPVC windows and doors. They can be a major source of noise, and they can also allow water to infiltrate your windows.

To fix this issue, first make sure whether the pin barrel on both hinge halves is aligned. If not tapping the headpin, use the hammer to make a slight bend in the hinge barrel. This will hold the pin in its place. Then, ask a helper to hold the door as you take the hinges and hinges from both the doorjamb as well as the door. Replace the hinges with ones that are the same size and then attach the screws using glue. Finally, secure the hinges with clamps or weights while the glue is drying.

Once you have repaired your hinges, you are able to put the door back in place. You could also reattach the handle. Replace the screws using wood dowels of the same length as the original screw to ensure they are in line.

Glass that is broken or is damaged

uPVC Windows can be damaged in time, despite the fact they are extremely effective in keeping out the cold and keeping the heat. This can include broken or damaged glass, as well as defective locks. If left unattended, this can become a very costly issue. This can also detract from the aesthetics of your home and lead to a loss in insulation. It is essential to fix any damage as soon as it occurs.

If the glass is cracked, but not broken it is possible to fix it yourself using the appropriate tools and methods. First, make sure that the area surrounding the glass is clean to ensure that any shards do not harm anyone and aren't an accident-prone area. Then, you must remove any pieces of broken glass and dispose of them in a safe manner. Apply masking tape across the entire area. This will prevent glass shards from sticking to your skin and scattering when you move them. Pre-fitting the glass pane before gluing it in place is recommended if you are dealing with a window that has two panes. This will ensure that you have enough space to finish your project.

Use a dry, clean cloth to clean the glass's surface and the frame prior to applying the glue. Follow the instructions for application and curing time, which can vary from product to product. Depending on the direction of the crack, you may need to secure the glass during the curing process with lightweight clamps specifically designed to support fragile materials.

After the adhesive has cure, carefully insert the glass into the window frame. Make sure it's in line with the frame edge and that there aren't gaps between the glass sash and frame. Be careful not to bend the glass when you install it again in order to weaken the seal. This could result in water infiltration or condensation.

If you have a glass window that's completely broken or has larger cracks, contact a professional glazier such as O'Brien(r) to organise a replacement. It's important to act quickly in the event of broken glass.