Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are easy to maintain and are durable and long-lasting. They are not susceptible to get rotten or rusty like timber and aluminum.

It is important to clean and oil UPVC windows and doors on a regular basis. This will save you from unnecessary repair costs and also improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home and even be fatal. It is crucial to take the time to ensure that you are doing everything you can to ensure that your windows are in good repair.

Single-pane windows are fairly simple to replace, and they generally fit into frames of the past easily. If you have double-paned windows that are held together by internal beading, it is difficult to remove and replace the panes that were previously in use. In this situation you'll need to source some plastic spacers that assist the new pane to fit properly into the frame of the window.

Wearing eye protection and heavy gloves is a must when you are planning to remove the glass yourself. It is also an excellent idea to lay down a dropcloth before you start working on the glass to ensure that any fragments of glass fall onto the cloth rather than on the floor where they could be trampled upon and cause further damage.

It's a great idea to cover the gap with tape after the glass is removed. This will prevent drafts and water from entering your home until a professional comes out to repair the window. It also acts as a barrier, preventing any intruders from getting access into your home. If the gap is large, you may want to consider using an alarm door that comes with an integrated window as it will provide the best of both worlds.

2. Sagging

Upvc windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber windows made of sash. As time passes, they may develop a variety of issues such as sagging. A sagging uPVC windows can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to sag it's crucial to act fast to stop the issue from worsening.

To fix a sagging window you can try to reposition the hinges. To do this, you'll need open the window so that you can get to the frame. With a screwdriver, you can take off the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Once you've adjusted the hinges, shut your window and test it for fit. If you're satisfied with the fit of the window, tighten the screws to keep them in the right position.

If you are unable to reposition the hinges, you could have to replace the seal. Over time, rubber seals lose their elasticity and dry out and cause them to loosen. It is crucial to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles may also loosen. This is typically caused by screws that have loosened over time, but it could also be due to the mechanism of the handle wears out. It's a good thing that it's simple to fix a loose uPVC window handle yourself. First, you'll need to close the window and perform an initial fitting. The joint at the corners of the sash should be aligned with the joint on the casing. If it isn't, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism into position.

3. Water Leaks

If you're waking up to wet floors and damp walls each time it rains it is important that you take action. The leaks of water from windows do can not only cause degradation of your home's structure but also hinder your efforts to regulate the temperature in your home. The most common cause for leaks in uPVC windows is that the sealant surrounding the frame is damaged or not present.

It is a fairly easy fix and should be undertaken by any skilled DIYer. Depending on how serious the issue is, the old caulking might need to be removed. When it comes to uPVC repair, it is important to avoid 'over-caulking'. This will only make your window more difficult to clean and lower its energy efficiency.

It is essential to ensure that the drainage holes are clear of debris and that the sill pan is placed properly so that it drains away from the window. In more serious cases you might have to consider replacing the window repair near.

Other indicators of long-term water leakage are decayed sills and the appearance of black spots of mold on the walls near the window. This fungus thrives under conditions of dampness and can spread quickly throughout the home.

If the leakage is occurring between the double-glazed glass, it is more likely that the issue is more with the seal than the frame. Again this can easily be corrected by an uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and open with ease It could be the hinges that are at fault. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Like any mechanical part, hinges can wear out over time. It is an easy procedure, but it is easier to do if you have someone to assist in holding the frame up.

Verify that the uPVC hinges are closed and open in the right direction. This can be done by looking for the arrows on each hinge, this indicates the direction in which the window should be opened.

The problem can be caused by opening the window incorrectly or due to a poor installation in the factory. Sending us a picture via our website will often resolve the problem. We are happy to give suggestions.

Regularly lubricating hinges is also essential. Applying a light engineering lubricant to the hinges is an ideal method to accomplish this. We recommend using a lubricant that does not contain solvents, timber such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also stop corrosion and timber reduce the possibility of sticking. Ideally, you should do this once a year. WD40 and other solvent based fluids are not recommended since they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different causes. The hinges may also become misaligned due to wear, causing gaps where the sash and frame meet. If they're beyond repair, it might be necessary to have them realigned. The second is the interlock, which is on the hinge side of the window, can be misaligned. Again, it is feasible to give them a good clean, but in some cases it might be necessary to have them replaced.

The seals may wear out or get damaged over time, allowing air escape. Installing high-quality weatherstripping will help to keep draughts at bay. Another alternative is to replace the upvc window with low-emissivity glass, this will help in regulating indoor temperatures and will lessen draughts.

One of the most effective methods to reduce draughts is by using a draught excluder. These are usually fabric tubes that are filled with some sort of filler and can be placed on top of your windowsill. They can keep your home warm by blocking cold air.

Your upvc windows can continue to provide excellent insulation and security for your home with a little regular maintenance and repairs. It is essential to remember that all windows eventually get worn out and it may be more cost-effective to simply replace them instead of fixing them. If you encounter any issues with your upvc window it is recommended to speak with a professional as soon as possible.