Ghost 2 Immobiliser Problems

The Ghost 2 immobiliser, designed to protect cars from hacking or key cloning, is a discreet device which can be put in place without causing any damage to your vehicle. It prevents your vehicle from starting unless you press an exact sequence of keys inside your vehicle like the password of the phone.

Stop/Start

Ghost Immobilisers prevent vehicles from being stolen by preventing the engine from starting until it is issued the correct PIN code. This is done with no modification to the vehicle and is totally undetectable to thieves. The unit communicates with the ECU via the CAN data bus to immobilise the vehicle. This system is like the one automobile manufacturers have been using in their vehicles for a long time However, thieves cannot add a new key or utilize key relay technology to bypass it as they can with factory fitted systems.

Ghost is compatible with all vehicles with an engine, including motorhomes, cars, vans, caravans, and bikes. The same system can also be used on electric vehicles. It's an excellent alternative to wheel clamps and steering wheel locks.

If the Ghost is activated, it will stop all buttons in your car and prevent the ignition from starting without a PIN number. This can be done via the Android or Apple mobile apps or by manually entering the code through your key fob. If a wrong code is entered, the app will show an indicator light and the Ghost will not allow the vehicle to start again. This is a great way to discourage thieves. If the vehicle is unable to be started the thieves will be able to move on.

The Ghost is a weatherproof small device that can be tucked away in the most difficult to access parts of your vehicle. Installation takes between 20-30 minutes for each vehicle. It is also easy to remove if you choose to change vehicles, or even give it to the valet or service center parking. It is a fully TASSA (Tracking and Aftermarket Security Systems Association) insurance-approved system that is endorsed by some insurers. It is also equipped with a safe emergency Pin Code override and features the Service/Valet Mode which can be activated by pressing a button on the app or by using your key fob.

Disarm

Contrary to the mechanical devices, which can be removed Ghost immobilisers are hidden and integrated into the vehicle. They are virtually impossible to hack or bypass and, even if they are found, a thief will not be able to start the engine. This is because a ghost immobiliser prevents key hacking, signal jamming and device spoofing - techniques that are used frequently by thieves to gain entry into vehicles that have standard immobilisers.

An immobiliser functions by sending an electronic code to the ECU (electronic control unit). If a wrong code is sent the vehicle will not be started because the engine will not start up. It is possible to disable a ghost immobiliser with a software tool, but it is extremely difficult and time-consuming to do so. The software can only be installed and used by an authorized installer.

The Ghost immobiliser is a tiny device that is tucked away in the vehicles wiring loom and is not visible to the naked eye after it has been installed. It won't show up on diagnostic systems, there are no LED indicators and it does not communicate with the engine via the OBD port. It communicates silently through the CAN data loop.

The system will stop the vehicle from starting until it is given a specific PIN code sequence. This code can be entered using buttons on the steering wheel, door panels, or the centre console. This is a more secure method to protect the car, as it doesn't require the use of a remote or key fob.

In addition to this Ghost has an option for service that can be activated through the application on your mobile phone. This allows you to give your keys to someone else for service or valet parking without having to enter the disarm sequence.

No matter if your Ghost is in service mode or not you should not attempt to remove the system on your own as it can affect your engine and cause damage. It is recommended to speak with an TASSA certified installer who will be able to remove the system in a safe and secure manner. Our most recent GHOST II immobilisers also include a special QR fingerprint sticker that is hidden in different areas of your vehicle, which are linked to our international security register. In the event that the system is removed and is sold on the black market, it will be linked back to its original owner.

Anti-Hijack

The anti-hijack feature is a key feature of the Ghost Immobiliser 2. This system is a smart key that protects your car from theft. If the ignition switch is turned to on, and the car remains stationary for a period of 30 seconds, the Ghost system will automatically stall the engine and turn on the warning lights on. This gives the driver or passengers time to press a secret security button (depending on the vehicle) before the system reactivates and the engine is again allowed to start.

In contrast to other systems that simply stop the engine whenever the ignition switch is turned on and on, the Ghost system uses a special controller and timer that will close the valve for cutting off fuel 14 when it is activated after the set time, even when the ignition is turned on! The delay time frame must be sufficiently long to allow the hijacked owner of the vehicle to drive away from the site of the hijacking and a sufficient distance from the vehicle that is stalled before the system can reactivate.

The Ghost comes with added security to prevent common hacking methods used to gain entry to modern vehicles, such as relay attacks and key range expanding. The Ghost system communicates in a quiet way and does not emit signals that can be snatched by thieves with RF scanning or code-grabbing technology.

The ghost immobiliser install system features a service / valet mode that allows your car to temporarily be started and driven without the need for PIN code. This is ideal for parking your vehicle and have to leave it for a brief amount of time, for instance, to put your items in the boot, open a garage door, etc. The system will exit service mode depending on the speed and time or by using the easy PIN code input process that gives you total security knowing that only YOU are able to utilize your vehicle!

Keyless Entry

With the growing trend in theft of cars using contactless technology Many customers are seeking out additional security options. This is particularly true for those who invested time and money in customizing their vehicle or own rare/expensive automobiles. An immobiliser add-on can be an effective way to avoid this kind of theft since it can stop your vehicle from starting until the proper pin code is entered alongside your key fob.

Immobilisers are made to work with a variety vehicle circuits including those which control starter motors and fuel pumps. They can also turn off the car alarm to attract attention and ward off potential thieves.

These devices communicate with the engine control unit (ECU) through the CAN data circuit, and they stop a burglar trying to get around it by installing a brand new ECU or by using an engine key programmer. These immobilisers are put in place in a discreet manner and leave no trace on your vehicle. They are also not detected by sophisticated tools used by thieves.

In contrast to other systems that require a separate application or tag that is worn on the person carrying it and a Ghost immobiliser can only be disarmed by pressing a sequence of electronic buttons that are already present on your steering wheel, door panel and the centre console, which allows you to choose a custom pin sequence. The pin can be easily changed and makes the device as secure as a credit card. It is also more difficult to break because it takes up to 20 press.

Ghost also offers a Valet/Service mode that lets you deactivate the system if your vehicle is to be turned over to valet parking or services and allows it to operate within predetermined parameters, like 30mph speed limits and you don't have to worry about your vehicle being driven at a reckless speed. The system can be activated with the original key or entry code.

Installed by our reputable installers, it is the most secure and reliable aftermarket CAN-immobiliser on the market. It is also certified by Thatcham for insurance purposes. The Ghost 2 immobiliser comes with six QR fingerprint labels, as well as an ISR contact cards containing your unique QR codes and an emergency code that is safe. All of these are kept in your purse or wallet.