Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are long-lasting, durable and easy to maintain. They don't decay or rust as aluminum and timber.

It is essential to clean and oil UPVC windows and doors regularly. This will help avoid unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows could cause severe damage to your home, and could even be fatal. You should take the time to ensure that your windows are in good shape.

For single pane windows, it is fairly easy to replace them, and the new window is usually able to fit into the old frame very easily. However If you have double-pane windows that are secured by internal beading, it'll be more difficult to take out the panes that are in place and replace them with new ones. In this situation it is essential to purchase plastic spacers to help the new pane fit into the window frame.

Wearing eye protection and thick gloves is essential if you plan to remove the glass by yourself. It is also a good idea to lay down a drop cloth prior to when you begin working on the glass, so that any shards fall onto the fabric instead of onto the floor where they could be trodden under and cause further damage.

After the glass has been removed, it's a good idea to cover the gap with clear packaging tape or duct tape to prevent water and drafts from getting into the home until a professional can come out and repair the window. This will also act as a barrier that will prevent any intruders to gain access to your home. If the gap is particularly large, you may think about an alarm door that comes with an integrated window, as this will offer the best of both worlds.

2. Sagging

uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash window. Over time, they can develop a variety of issues that include sagging. A window that isn't properly aligned can cause problems with light, draughts, and even security. It's important to take action immediately if you notice your uPVC windows are sliding.

Repositioning the hinges could aid in fixing a window which is sagging. To do this, you'll need open the window so that you can access the frame. Then, you can remove the top and bottom hinges with a screwdriver and adjust them clockwise or counter-clockwise. After you've repositioned the hinges, close the window and test it for an appropriate fit. If you're satisfied with the size of the window, you can tighten screws to secure them in the right position.

If you cannot reposition the hinges, you could need to replace the seal. Rubber seals can dry out and lose their elasticity with time, which causes them to loose their elasticity. If this happens, it's important to replace the seal as fast as you can to ensure that your uPVC windows are watertight and safe from drafts.

upvc window repairs handles can also loosen up. This is typically caused by screws that have become undone over time, but it can also be due to the mechanism of the handle getting worn out. It's relatively easy to fix a loose uPVC hand. First, you'll need to close the window and then perform an experiment to ensure that it fits. The joint at the corner of the sash must align with the joint on the casing. If it doesn't, you can make use of a screwdriver to loosen the handle and then return the mechanism to its original its original position.

3. Water Leaks

It is essential to take action if wake up every morning to find mouldy walls and floors that are wet. Windows that leak water do not only lead to the degradation of your home's structure but also hamper your efforts to control the temperature in your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is a relatively easy fix that can be completed by any DIY expert. Depending on how serious the issue is, the old caulking may need to be removed. It is crucial to remember that when it is about uPVC window repairs you should not be tempted to 'over-caulk in order to make the area harder to clean and could decrease the efficiency of your energy usage.

It is essential to ensure that any drainage holes are free of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more serious situations, you may have to replace the window.

Mold spots and rotted sills are also signs of water leakage. This mold thrives in damp environments and can quickly spread throughout the house.

If the leakage is occurring between the double-glazed glass it is more likely that the problem is with the seal rather than the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window is difficult to open or it opens with a breeze. Any competent DIYer can replace the hinges in a matter of minutes.

Almost every household in the UK will have top-hung or side-hung uPVC windows that have hinges and like any mechanical part they can wear down over time. It's easy to change a window hinge however it is easier if someone else helps you hold the frame.

It is also important to verify that the uPVC hinges are being opened and closed in the correct direction. You can do this by checking for the arrows on each hinge, this indicates which way the window should open.

Faulty window hinges could be caused by improperly opening the window in a certain way or by inadequate installation at the factory. Sending us a photo through our website can often resolve the problem. We are always happy to offer suggestions.

It is also crucial to grease the hinges on a regular basis. Applying a light engineering lubricant on the hinges is an ideal method of doing this. We recommend using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also reduce the possibility of a window sticking and prevent corrosion. It is recommended to do this once a year. WD40 or other solvent-based oils should not be used as they can damage your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by a few various factors. The hinges can also be disaligned as a result of wear, which can cause an opening between the frame and sash. If they are beyond repair, it could be necessary to get them re-aligned. The interlock may be misaligned. It is located on the hinge's side and might require to be cleaned. In some cases, it may be necessary to replace the hinges.

The next common cause of draughts is the window seals, these can become worn down or damaged over time and let air escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glasses. This will help to regulate indoor temperatures, and reduce draughts.

Another method of reducing drafts effectively is to use a Draught-exclusion device. These are usually fabric tubes filled with a filler, which can be placed over your window sill. They will keep your home warm by blocking out cold air.

Your upvc windows can keep providing excellent insulation and security in your home with a little regular maintenance and repairs. It is crucial to recognise that windows last for a certain period of time and there may come the point when it's more cost-effective to replace them rather than repair them. If you have any problems with your upvc window, it's best to consult a professional as soon as possible.