Choosing uPVC Replacement Window Handles

The majority of customers agree that upvc replacement handles are easy-to-install and feel great. It's crucial to understand that the handle you pick for your window has to be suitable for the window.

The step height is the most important factor. It is the distance between the handle and the frame, or base. Other considerations include lockable designs and mechanisms.

Replacement parts

You can purchase a range of replacement upvc handles. They come in a variety of styles and colors so there is sure to be something that will fit your existing windows. It's easy for you to buy something on impulse, especially when the handle is damaged. Therefore, it is best to do some research before buying an alternative. First, you must be aware of the kind of handles made from upvc you have and what the differences are between them. The table below outlines the most common handles to help you choose the one that is suitable for your upvc windows.

The majority of double-glazed windows today come with handles that are epag. They are usually affixed to the frame with two screws that are screwed into the frame from both sides, above and below.

The spindle bar in the back can be different sizes, and will determine if they're left-handed or right-handed. It is essential to know the measurements of the handle you must ensure that you purchase the correct replacement.

The arm is secured to the frame with two bolts, similar to the Espag handle. However, the handle has a low projection so that it doesn't damage your blinds. This is a great option if you want the handle to blend in with your blinds and have upvc windows.

Cockspur handles are similar to Espag handles, however they have a nose which closes over a wedge which sits on the window frame. This kind of handle is commonly found on older upvc windows and also on some wooden windows.

Tilt and turn handles are typically found on casement windows and can be operated either by turning the handle or pressing on the top of the window. This allows you to open the window from inside and clean it from outside without having to climb a ladder or walk across the garden fence. These are also an excellent option for those with limited mobility and enhance security and access to the home.

Tips and hints

There are a variety of different kinds of uPVC window handles, and a lot of people will find themselves replacing them at some moment. If this happens it's best to know a few tips and tricks that will make the process be as smooth as it can.

The first thing to do is check what type of handle you have at home. Based on the kind of handle and the locking mechanism, it could be necessary for you to replace the lock and handle. For instance, if the shoot bolts (espag) and roller cams are jammed or seizing the handle, you'll need to replace them as well as the handle itself.

Thankfully, the majority of uPVC handles conform to industry standards and are very similar. This makes replacing them a relatively simple process. First, you must remove the screw covers on the handles. They are typically pozidrive screws. Once the screw covers are removed then you'll be able to remove the handle.

When you have the handle separated from the handle, it's a good idea to make a note of how much of the spindle protrudes from the base of the handle. This will enable you to determine the length of the spindle for the replacement double glazed windows handle. Simply measure the length the square peg sticks out of the bottom of handle.

This is particularly important for inline uPVC windows handles, as they are always straight and will only open to the left or right. They aren't able to function in the middle. If you're not sure of the kind of handle you have at home, it could be beneficial to get a handle from a neighbour's home and see how it operates to get an idea.

You can also determine the hands of a uPVC window by watching how the handle spins when it is in use. Handles can be turned either clockwise or counter-clockwise. If you're unsure, you can always have someone else open the window using the handle, and figure out how it functions in this way.

Measure the spindle

It can be difficult to pick the right replacement handle for your window since not all handles have the same size. The spindle is the part that controls the locking mechanism inside the window. It is crucial that when fitting a new handle, you measure the length of the spindle precisely to ensure that it fits. There are a variety of uPVC handles that operate in various ways. It is important to determine which one you have, as well as the locking mechanism you are using.

The spindle of the Espag handle is a part that extends from the rear of the handle and goes into the lock gearbox within the window frame. When you turn the handle, this turns the lock within the gearbox and opens the window. They are typically used on uPVC casement windows. They can be locked with keys to provide extra security.

Cockspur handles are commonly found in older double-glazed uPVC window frames. They have an "nose" that closes over a wedge shaped striker block. They are also relatively easy to install and can be locked with keys. It can be more difficult to replace these handles because they are not as popular as the handles made of espagnolette.

If you have a tilt and turn uPVC window then you will need to get a special kind of uPVC replacement handle with an entirely different locking mechanism. This will be able to open the window, but also rotate it back and forth to fully open it. It is essential to make sure that the handle you pick has a length at least 55mm, or it will not be able to get into the window frame.

The same procedure can be used to remove and replace the uPVC handle. However, you'll need to take care when removing it. It might be necessary to open the window more than usual to access both screws that secure it to the frame. Once you have fitted your new uPVC handle and xn--3e0bnls92bgvcbqcd1hpxcmou4od78a.kr checked that it is in the proper position, you are able to tighten the screw covers and test the lock to make sure it functions properly.

Replace the handle with the new one.

If you have the proper replacement handle, it should simply screw into the correct position. It will require a screwdriver and an electric one might be more convenient. When screwing, it is important not to over tighten the screws, as this can cause the handle to warp or crack.

Inserting the spindle is the second important step in installing the new handle. The spindle is a part that is inserted into the handle to control the locking mechanism inside the window. It is crucial that it fits correctly as this will ensure that the window can be opened and closed securely.

There are many different types of uPVC handles. These include:

Espagnolette Handles are inline handles which can be used to open tilt and turn windows.

Cranked Espagnolette Handles - these are similar to the inline handle, but have a curvaceous design that is useful for windows that are difficult to reach.

Tilt and Turn Handles - These are used on tilt and turn windows to operate the opening and closing mechanisms.

The majority of uPVC window frames come with these. They are often referred to as 'Bay Windows in the UK.

If your uPVC window handle is broken it can be a major hassle. There isn't any need to replace the entire uPVC windows because of a damaged handle. There are a few easy steps you can follow to fix or replace a damaged uPVC handle.

You can repair your broken window handle quickly by identifying the model and determining the spindle. It is important to be patient and ensure safety when working with windows and tools, but this is a relatively straightforward task. It could make the difference between having a secure and secure home or a unsecured, easily opened window! If you have any questions or would like to speak to a professional about replacing your window handle, call Bridgewater Glass. Our team is skilled and knowledgeable to help you with any issues.