Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are easy to maintain, durable and long-lasting. As opposed to aluminium and timber they don't corrosion or rot.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will reduce unnecessary repair costs and also improve the efficiency of energy.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large deal of damage to your home, making it extremely dangerous and possibly fatal. It is essential to ensure that your windows are in good shape.

For single pane windows, it is fairly easy to replace them, and the replacement is usually able to fit into the frame of the previous one easily. If you have double-paned windows that are held together by internal beading, it is harder to remove and replace the old panes. In this case you'll need to find some plastic spacers to aid the new pane in being able to fit properly into the frame of the window.

Wearing protective eyewear and thick gloves is a must for anyone who plans to remove the glass by yourself. It is also recommended to lay down a drop cloth before you begin working on the window panes, so that any shards of glass fall onto the fabric, not onto the floor, where they could be trampled.

After the glass has been removed and the glass is removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to stop drafts and water from entering the property until a professional is able to come out and fix the window. It also acts as a barrier, preventing any intruders to gain access into your home. If the gap is particularly large, you might be interested in the security door with an integrated window, as it will provide the best of both worlds.

2. Sagging

uPVC is durable, energy-efficient and affordable alternative to timber sash window. In time, they could be affected by a variety of issues, including sliding. A sagging uPVC window could cause issues with light, draughts, and even security. If you find that your uPVC window is beginning to lose its shape, it's crucial to act fast to stop the issue from getting worse.

To fix a sagging window you can try to reposition the hinges. First, you'll need to unblock the windows so you can access the frame. After that, using a screwdriver, you can unscrew the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've repositioned the hinges, shut your window and test it for fitting. If you're satisfied with the fit, tighten the screws to ensure that they stay in the right place.

If you are unable to reposition the hinges, you might need to replace the seal. Rubber seals may dry out and lose their elasticity with time, causing them to lose their tightness. If this happens, it's essential to replace the seal as quickly as possible so that your uPVC windows are watertight and draught-proof.

uPVC handles may also loosen up. The majority of the time it is due to screws that have become loose over time. However, it could be due to the fact that the handle mechanism has worn out. It's a good thing that it's simple to fix the loose uPVC window handle yourself. The first step is to close the window and then perform a test to ensure that it fits. The joint at the corners of the sash must align with the joint on the casing. If it isn't, you can use a screwdriver to loosen the handle and reverse the mechanism back into position.

3. Water Leaks

It is important to take action if you wake up every morning to find mouldy walls and floors that are wet. The leaks of water from windows do are not just a cause for degradation of your home's structure but also hinder your efforts to regulate the temperature inside your home. The most common reason for leaking uPVC windows is that the sealant around the frame has been damaged or missing.

This is an easy fix that can be completed by any DIYer who has the ability. Depending on the severity of the problem the caulking used previously may require removal before a new layer of caulk can be applied. It is essential to remember that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk' as this will only make the area more difficult to clean and could reduce the efficiency of your energy.

It is important to check that any drainage holes are free of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more severe situations, you may have to replace the window.

Other indicators of long-term water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and can spread quickly throughout the house.

It is also important to remember that if the leak originates from the glass of your double glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sliding. It is also possible to be fixed by an uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or slack and open in a breeze It could be hinges that are at fault. They can be repaired by any skilled DIYer and can be completed in a matter of minutes.

Like any mechanical component hinges will wear out over time. It is an easy procedure, but it is easier with someone else to help hold the frame in place.

Verify that the uPVC hinges are open and closed in the proper direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window in a certain manner or because of inadequate installation at the factory. This issue can be fixed by sending us a photo through our website and we will be pleased to offer you suggestions.

It is also crucial to ensure that the hinges are lubricated on a regular basis. Applying a light engineering lubricant to the hinges is an ideal method of doing this. We suggest using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It also helps prevent corrosion and reduce the risk of sticking. It is recommended to do this once a year. WD40 and other solvent-based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts in upvc repair windows can be caused by a few various factors. The hinges, also due to wear and tear can become misaligned, this will cause gaps to develop where the sash meets the frame. If they are beyond repair, it may be required to realign them. In addition, the interlock could be misaligned. It is located on the hinge side and could require to be cleaned. In certain instances it is possible to replace the hinges.

These seals are susceptible to wear and tear or get damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping will help to keep draughts at bay. Another alternative is to replace the window with low-emissivity glass, which will help regulate indoor temperatures and will reduce the risk of draughts.

The last way to reduce drafts effectively is to use a draught-excluder. These are usually fabric tubes filled with a filler, which can be hung over your window sill. These will help to stop cold air from entering and keep your home warm and cozy!

With a little regular maintenance and repairs windows made of upvc will continue to provide an excellent level of security and insulation for your home. It is crucial to keep in mind that all windows eventually become worn out, and it could be more cost-effective to replace them than to repair them. So, if you are experiencing problems with your upvc windows, it's best to seek professional assistance as soon as you can.