Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are easy to maintain, durable and long-lasting. They are not susceptible to get rotten or rusty like aluminum or timber.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will save you from unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is damaged, it could cause a large amount of damage to your home, making it very hazardous and possibly fatal. It is important to take the time to ensure that you're doing everything you can to keep your windows in good condition.

For single pane windows it is fairly easy to replace windows, and the new one will generally fit within the frame of the previous one easily. If you have double-paned windows that are joined by internal beading, it is more difficult to remove and replace the old panes. In this situation you'll need find some plastic spacers that assist the new pane to fit properly into the window frame.

If you plan to attempt to remove the window panes yourself, it is essential to wear appropriate safety gear that includes gloves with a thick layer of material and protective eyewear. You should also lay down a dropcloth before you begin working on the window panes, so that any shards fall onto the fabric and not on the floor and could be trampled under.

Once the glass has been removed, it's a good idea to seal the gap with clear packaging tape or duct tape to stop water and drafts from entering the home until a professional can come out and repair the window. It also acts as an obstruction to prevent intruders from making their way into your home. If the gap is particularly large, you might think about a security door that has an integrated window, since this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are a low-cost, durable and energy-efficient alternative to timber sash windows. However, over time they are susceptible to a range of issues like sliding. A window that isn't properly aligned can cause problems with light, draughts or even security. It's crucial to act as soon as you notice your uPVC windows are sliding.

Repositioning the hinges can help fix a window that is sagging. To do this, you'll need to open the window so that you can access the frame. With an screwdriver, remove the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. After you've repositioned the hinges, close the window repair near me and check for fitting. If you're happy with the fit, tighten the screws to ensure they remain in position.

If you are unable to reposition the hinges, you might require replacing the seal. Over time, rubber seals lose their elasticity and dry out which causes their tightness to decrease. It is important to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles can also become loose. This is often caused by screws that have been removed over time, but it could be due to the mechanism of the handle getting worn out. Luckily, it's not difficult to fix the handle of a window that is loose yourself. The first step is to close the window and then perform an initial test fit. The joint at the corner of the sash must align with the joint on the casing. If it doesn't you can use a screwdriver to loosen up the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

It is crucial to act if you get up each morning to find mouldy walls and wet floors. The leaks of water through windows could cause structural damage to your home and also hinder your ability to control the temperature of your home. The most frequent reason for leaks in uPVC windows is that the sealant surrounding the frame is either damaged or is missing.

This is a fairly simple fix and should be undertaken by any DIY expert. Depending on how severe the issue is, old caulking might need to be removed. It is crucial to keep in mind that when it is about uPVC window repairs, do not be tempted to apply too much caulk in order to make the area harder to clean and could reduce your energy efficiency.

Check that any drainage holes do not have debris in them, and also that the sill pan is properly angled to drain away from the window. In more serious instances, you might have to consider replacing the window.

Other signs of long-term water leakage include decayed sills and the appearance of black spots of mold on the wall near the window. This fungus thrives under conditions of dampness and can spread quickly throughout the house.

If the leakage is occurring between the double glazing near me-glazed window, it is more likely the problem is related to the seal, not the frame. A uPVC specialist can easily solve this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window is difficult to open, or if it opens with a breeze. They can be easily replaced by any competent DIYer and can be completed in a matter of minutes.

Like any mechanical part hinges are prone to be damaged over time. Changing a window hinge is essentially a simple process but it can be easier to do if you have someone to help hold the frame up.

It is also important to verify that the uPVC hinges are opening and closed in the correct direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window a certain manner or because of inadequate installation at the factory. This can often be resolved by sending us a photograph through our website and we will be happy to give you advice.

Regular lubrication of the hinges is essential. This can be done by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regularly lubrication makes the window easier to open and close. It also helps prevent corrosion and reduce the risk of sticking. Ideally, you should perform this every year. WD40 and other solvent based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by different factors. First, the hinges due to wear and tear may become displaced, which can cause an opening to appear between the sash and the frame. If they are beyond repair, it may be required to realign them. Secondly the interlock, this is located on the hinge of the window, may also become misaligned, again it is feasible to give them a thorough clean, however in some instances it could be necessary to have them replaced.

These seals are susceptible to wear and tear or become damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with glass that is low-emissivity, which will help regulate indoor temperatures, and also reduce the risk of draughts.

One of the most effective methods to reduce drafts is to use a draught excluder. These are typically made of fabric filled with some kind of filler. They can be positioned on top of your windowsill. They can help stop cold air from entering and keep your home warm and cosy!

The windows made of upvc can continue to provide excellent insulation and security in your home with a little regular maintenance and repairs. It is essential to remember that all windows will eventually get worn out and it is more cost-effective to replace them instead of fixing them. If you are experiencing issues with your upvc window you should consult a professional as soon as possible.