Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are easy to maintain and are durable and long-lasting. As opposed to aluminium and timber they are not susceptible to rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will help prevent unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a huge deal of damage to your home, which can make it extremely dangerous and possibly fatal. It is essential to make sure that your windows are in good shape.

Single-pane windows are fairly simple to replace, and they will usually fit into the frames of the past easily. If you have double glazed window repairs near me-paned windows which are held together by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this instance you'll need to find some plastic spacers that will help the new pane to fit properly into the window frame.

If you're planning to attempt to remove the window panes by yourself it is crucial to wear the proper safety gear such as gloves that are thick and eye protection. It is also a good idea to lay down a drop cloth before you begin working on the glass to ensure that any shards fall onto the cloth instead of landing on the floor where they can be trampled upon and cause further damage.

Once the glass has been removed from the window, it's best to seal the gap with some clear packaging tape or duct tape to stop water and drafts from getting into the property until a professional comes out and fix the window. This will also provide an obstacle to stop criminals from getting into your home. If the gap is large, you may think about a security door that has an integrated window, since this will offer the best of both worlds.

2. Sagging

Upvc is a long-lasting and energy efficient alternative to timber sash windows. However, with time, they can suffer from a variety of problems including sagging. A sagging window can cause problems with light, draughts, and even security. It's important to take action as soon as you discover that your uPVC windows are sliding.

Repositioning the hinges could aid in fixing a window that is sagging. First, you'll need to open the windows to get at the frame. Then, you can remove the hinges at the top and bottom using a screwdriver and adjust them clockwise or Repairs to upvc windows counter-clockwise. Once you've repositioned the hinges, close the window and test it for fitting. If you're satisfied with the fit, you can tighten the screws until they stay in position.

If you are unable to reposition the hinges you may require replacing the seal. Seals made of rubber can dry out and lose their elasticity over time, leading them to lose their tightness. It is important to replace your seal as quickly as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles may also become loose. Most often it is due to screws that have become loose over time. However, it can also happen because the handle mechanism has worn out. Fortunately, it's easy to fix the handle of a window that is loose yourself. First, you'll need to close the window and do an initial fitting. The joints at the corners of the sash should be aligned with the joint on the casing. If it does not you can use a screwdriver to loosen the handle. Then, Repairs to uPVC Windows turn the mechanism to position.

3. Water Leaks

If you awake to damp floors and mouldy walls each time it rains it's important to take action. Windows that leak water do not only lead to the degrading of the structure of your home but also hinder your efforts to control the temperature in your home. The most common cause for leaking uPVC windows is that the sealant around the frame has been damaged or is missing.

This is a simple fix that can be completed by any DIYer who is competent. Depending on the severity of the issue the caulking used previously might need to be removed before a new layer can be put on. It is essential to keep in mind that when it comes to uPVC window repairs, do avoid the temptation to "over-caulk' as this will only make the area harder to clean and can reduce the efficiency of your energy.

Check that any drainage holes do not have debris inside them and ensure that the sill pan has been angled correctly to drain away from the window. In more serious situations, you may have to replace the window.

Other indicators of long-term water leakage are rotted sills and the appearance of black spots of mold on the walls near the window. This fungus thrives under damp conditions and can spread quickly throughout the home.

If the leakage occurs between the double-glazed glass it is more likely that the issue is with the seal than the frame. A uPVC specialist can easily fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open or if it blows open with an ease. They can be easily repaired by any DIYer who is skilled and are usually completed in just a few minutes.

Most households in the UK will have top-hung or side-hung uPVC windows that use hinges and like any mechanical part they can wear down over time. It's easy to replace a hinge on a window however it is easier if someone helps hold the frame.

It is also important to verify that the uPVC hinges are being opened and closed in the correct direction. Check for the arrows on each hinge to determine which way the window should be opened.

The issue could be caused due to opening the window in the wrong way or by a poor installation in the factory. Sending us a picture through our website can often resolve the problem. We are more than happy to provide assistance.

It is also crucial to ensure that the hinges are lubricated on a regular basis. This can be accomplished by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regularly lubrication makes the window easier to open and close. It can also reduce the risk of a window sticking and help prevent corrosion. This should be done at least once a year. WD40 and other solvent based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by different factors. The hinges can also be unbalanced due to wear, creating a gap where the sash and frame meet. They can be repaired by giving them thorough clean, however when they're beyond repair, it may be necessary to have them aligned or replaced. The interlock may also become misaligned. This happens on the hinge side and may need to be cleaned. In some cases it is possible to replace these.

The seals may wear out or get damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the window with low-emissivity glass, this will help in regulating indoor temperatures, and also lessen the possibility of draughts.

Another, and most effective ways to cut down on drafts is to use a draught excluder, these are usually fabric tubes that are filled with some type of filler. They can be placed on top of your windowsill. They will keep your home warm by blocking out cold air.

The windows made of upvc can keep providing excellent insulation and security to your home with a little regular maintenance and repairs. It is essential to remember that all windows eventually become worn out, and it could be cheaper to replace them rather than repair them. If you have any problems with your Upvc window you should consult a professional immediately.