Ghost autowatch immobiliser Immobiliser 2

Guards your vehicle from key cloning and stops thieves from driving your vehicle with original keys. Our most recent immobiliser is connected to the CAN data network of your vehicle and a unique pin must be entered to begin the engine.

In contrast to trackers, Ghost does not transmit radio frequency signals and cannot be detected with diagnostic tools. Ghost does not have LED indicators or buttons to signal its presence in your van or car.

Anti-key cloning

The ghost immobiliser has been designed to combat key cloning and hacking. This device is connected to your vehicle's CAN data network and creates an unique pin code by using the factory buttons on your dashboard and steering. This stops the criminal from being able to start your vehicle. If the incorrect PIN is entered it will stop your engine from running and making it impossible to drive off with your joy and pride.

Ghost immobilisers are new technology that is extremely hard for thieves to beat. In contrast to physical deterrents such as wheel locks and steering locks that can be cut or stolen the ghost immobiliser is a discreet electronic device that cannot be recognized by ordinary thieves because it doesn't emit radio signals and works silently.

This next generation immobiliser is capable of protecting your vehicle from a range of threats including keys that are duplicated, key-hacking, and even relay attacks. It also has the ability to prevent thieves from adding a new key or replacing your ECU, as it will not allow them to start your car without entering the correct PIN code before entering.

Contrary to other immobilisers, the ghost immobiliser 2 doesn't require a remote or key fobs for operation. It can be turned off through an app that is installed on the smartphone of the driver. This is ideal for those occasions when you need to hand your car to valet parking or servicing without keys.

The autowatch ghost installation birmingham Ghost-II represents the latest version of the Ghost immobiliser. It was designed to make it as simple and user-friendly as possible and yet be as secure as is possible. This is achieved by integrating the Ghost-II with the vehicle's CAN data network. This means that there are no wires that are able to be hidden or easily discovered. It also has a built-in feature that allows users to deactivate their Ghost-II by simply connecting to the vehicle's Bluetooth and you'll be able to go out and drive hassle free.

OBD port hacking

OBD port hacking is the newest method employed by professional car thieves to steal cars. Thieves can access your vehicle's OBD port with nothing more than a laptop, an app, and a few cables that can be bought online for under PS50. Once they have access to your vehicle's OBD port, they are able to do whatever they want from resetting fault codes and tuning your vehicle to stealing your pride and joy in under a minute.

If you have an Ghost immobiliser installed, it will stop your car being stolen with this method by requiring that a unique PIN sequence is entered on the fob of your key in order to start the engine and drive away. It communicates with the vehicle's ECU (Engine Control Unit), using the CAN Data Circuit. This is completely undetectable by any scanners for RF or code grabbing. It also has a Service/Valet mode which allows your vehicle to start without needing the PIN code.

To utilize an OBD hacking device, you'll require a laptop with software capable of reading the OBD protocol. This can be bought for less than PS100 on eBay or Amazon. You will also need a cable with OBD pins that are connected to the CAN bus, these can be purchased on Amazon or Ebay for around PS50. Then, you need to splice the cable into the wiring harness of your car for example, in the radio wiring harness.

Once the hacker has gained a connection to your vehicles OBD port, they can send diagnostics requests to the system at high baud rates which will crash the CAN and stop systems inside your car from working. This can cause the engine to stall and doors to lock, or even the brakes to engage.

No additional key fobs or remotes required

The car immobiliser is a fantastic piece of anti-theft technology used by billions modern vehicles across the globe. An aftermarket immobiliser safeguards your vehicle with engine ECU software that prevents cars from starting when the transponder is false.

However, it can be easy for thieves to bypass an immobiliser system when they have access to the code to deactivate it. The battery inside most key fobs can be removed by prying it open and a burglar can use a simple tool to remove the immobiliser's internal circuit board and replace it with an empty. Then, they will be able to start your vehicle.

With the TASSA approved Ghost 2 immobiliser, there are no additional keys or remotes required. The immobiliser communicates with engine ECU (Engine Control Unit) via a subtle, silent CAN data circuit that is unnoticeable with diagnostic tools, such as those used by high-tech thieves. It also doesn't use a traditional key-fob with LED indicators, so it is able to go unnoticed at a glance.

There will be times where you have to disable autowatch ghost installers midlands Ghost 2's automatic protection for example, when you are doing an valet parking or a service work. The ghost CAN immobiliser has a dedicated mode for this, referred to as "Service Mode that is activated by the touch of the button on your smartphone. The car can still be operated however the maximum speed is restricted to 36mph.

If you'd like to learn more about the TASSA accredited ghost immobiliser, please contact us today to book a demonstration at our workshop. A member of our team will explain the process and will give you a Ghost 2 emergency card, installation certificate, and security assurance.

Simple process to change the PIN code

ghost immobilise is the next-generation device that protects your vehicle without cutting wires or installing key fobs from an aftermarket. It is directly connected to the vehicle's CAN data network and a personal PIN code is programmed in it via buttons on your steering wheel and dash. The system blocks engine start and cannot be bypassed because no RF signals are emitted from the device. This makes it inaccessible to sophisticated RF scanning or code grabbing technologies that modern thieves use.

The PIN code can be changed to block earlier drivers or include an override code in case you forget the sequence. During installation the installer will show how to do this. The system also comes with a valet mode feature which can be used to temporarily disable the pin input sequence so that your mechanic or garage can service the car without needing to know the code. This is great for customers who wish to surrender their car for valet parking or service, but still don't want to give away the PIN sequence.

Contrary to Thatcham products that require additional key-fobs in order to operate, Ghost is a discreet system that uses the buttons in your vehicle to create an unique and interchangeable PIN code sequence. This sequence is entered using the app on your smartphone, which means that no additional LEDs are displayed and your vehicle is safe from the risk of being blocked by hackers or other technology.

Every vehicle is tested

Contrary to key fobs which require you to press buttons on them, a ghost immobiliser is hidden under the dash or steering wheel to make sure you are unaware it's there. The device is connected to the vehicle's CAN data network, and a personalised PIN code is programmed using buttons that are already present on your vehicle. The system will then stop your engine from starting unless the code has been entered before. This means that thieves are unable to duplicate the keys of your vehicle or gain access to the OBD to hack into it.

Ghost is a feature that can be found in any vehicle, including electric vehicles, motorhomes, vans, and bikes. It's also extremely flexible and can be programmed to turn off in various scenarios. For instance, it can be programmed to enter Valet mode when the car is taken to a valet park or a service provider. This means that your vehicle can be operated within a pre-determined 30mph speed limit, and the ghost immobiliser will activate itself when it is returned to your property.

Another fantastic feature is that the device can be reset to your personalised PIN code at any time. This is great in the event that you forget the code or if the device becomes unusable.

It's also important to note that the device is completely inaccessible to those who aren't familiar with it. It does this by running through the buttons on your steering wheel and dashboard and analyzing the data they transmit to identify which button was hit. This makes it a secure and reliable security option that can't be tampered with by jamming, RF scanning or door lock pick sets.