Double Glazing Lock Repairs

Having quality locks on your doors and windows helps to prevent burglars from getting into your home. Generally, they don't like breaking glass or squeezing through open windows.

However, some double glazing owners have encountered problems with their door or window lock after it's been installed. Luckily, these problems are often fixable without having to pay for new double glazing.

Broken or damaged locks

A locksmith can fix your uPVC window lock or door lock if it is damaged or is not working properly. They can repair hinges, striker plates, and locks for double glazing. They can also move the cylinder around to fix any misalignment problems that may be causing the handle to not function properly.

The mechanism might be jammed if the key fits in the lock, but it will not turn or be difficult to insert. This could be due to dirt or grime getting stuck within the mechanism. If this is the case, then it may be possible to clean the lock and then lubricate. Use a dry lubricant like graphite or teflon and not oil, as oil can attract dirt, and cause it to stick to the inside mechanism. After having lubricated, insert the lock key into the lock and turn it. The lubricant needs to work its way into the mechanism and the lock should turn smoothly.

A malfunctioning lock could be caused by loose screws within the mechanism of the lock. They can become loose and fall out or break completely and stop the lock from working correctly. A screwdriver is a tool to tighten the screws but caution must be taken not to tighten them too much, since this could damage the internal components.

A damaged lock could be dangerous for both you and your family, particularly if you have young children. They could easily open the door without knowing which gives them access to your house. If you're concerned that this might occur, a professional locksmith can help you to secure the double glazing doors.

Misty Glaze is a professional uPVC company in Lancing that can repair all kinds of defective and damaged mechanisms on uPVC windows and Jere Alas doors. We can also alter your uPVC or double glazing locking system to meet your particular requirements, meaning that in most cases, replacement windows and doors are not necessary.

Broken or Faulty Handles

Many double glazed windows feature a multi-point lock as part of the overall security package. This is a great choice for those who are concerned about potential thieves who may try for ways to gain access to your home. Ask your installer about antilift blocks. They can be put in alongside your existing locks and will aid in keeping your windows shut.

Handle locks can be damaged or fail. They are the first part that criminals use to force open your window. The good news is, this is one of the easiest parts to fix.

Modern uPVC handles and aluminium handles come with a multi-point locking mechanism, referred to as Espagnolette which is designed to ward off forced entry. This security upgrade is offered as an option for new uPVC windows. Older style uPVC and aluminum handles can be upgraded to shoot bolt locking systems, again as an optional option on double-glazed window installations.

When a handle is faulty it's crucial to get it repaired as quickly as you can. A damaged handle could prevent the window from closing properly and permit drafts to get in. It could also be a weakness that opportunistic thieves could take advantage of and jerealas (just click the following page) put the belongings of your family and your personal belongings at risk.

The process of fixing the malfunctioning mechanism begins by opening the window frame and removing the damaged handle. The gearbox can then be accessed to identify the type of gearbox that is used to open the handle. This will allow to replace the handle that matches the profile and internal window frame mechanisms.

After the mechanism has been repaired, the handle may be reattached using the original screws. We recommend replacing them with larger screws as they will provide the most secure fit. The final step is to seal the handle with a clear sealant. This will shield it from further deterioration. After this step is completed your window will be fully functional again at a fraction the cost of replacing it.

Hinges that are Broken or damaged

If your windows don't shut properly, you could suffer from draughts or an affliction of your home's security barrier and an increased chance of damp or water damage. Broken or defective window hinges are a frequent issue that can be fixed easily.

If your uPVC windows won't open or shut it's likely that the hinges require to be replaced or repaired. While most window manufacturers require you to purchase a whole new window to solve this issue, we're able to replace the damaged hinges and save you money.

Window hinges can often break from repeated use or they could be weakened due to corrosion over time. If you've got a broken window hinge, it's crucial to take the necessary precautions to prevent further damage. This includes not causing the window to open or close.

You can locate the appropriate parts for your hinge by identifying its type. Common kinds of window hinges include Maco, Mila, Roto and other brands. It's best to consult a professional in this case so that you don't make the mistake of purchasing parts that are not compatible with your existing hardware and could cause further damage.

The hinges that are not working properly can be a huge issue for uPVC doors and windows. They can be a major source of noise, and they can also allow water infiltration which could damage your windows.

To fix this issue, first make sure whether the pin barrel on both hinge halves is aligned. If it isn't, tap the headpin with the hammer to create a slight bend in the hinge barrel. This will hold the pin in position. Then, ask a helper to hold the door as you remove the hinge screws and hinges from both the doorjamb and the door. Replace the hinges using those that are the same size and then attach the screws using glue. Finally, while the glue is drying, secure the hinges with clamps or weights.

After your hinges have been repaired, you should be able to re-install the door and re-attach the handle. It is recommended to replace the screws with the same length of dowels as the screw that was originally used so that they align with each one.

Glass that is damaged or damaged

uPVC Windows can be damaged over time, despite the fact that they are great at keeping out the cold and conserving heat. This can be the case with broken or damaged glass and faulty locks. This issue could be extremely costly when left unattended. It can also detract from the appearance of your home and can lead to loss of insulation, which is why it's crucial to repair any damage as soon as you can.

If the glass is broken but isn't shattered it is usually possible to repair it yourself using the right tools and techniques. First, make sure the area around the glass is free of debris so that any shards don't injure anyone and aren't an accident hazard. Then, you must remove any pieces of broken glass and dispose of them appropriately. Then, put masking tape over the entire area to stop fragments from bouncing around and sticking to your skin when you move them. If you're dealing with a double-pane window, it's a good idea to prepare the glass before gluing it back in place so that you know you'll have enough space complete the project.

Use a dry, clean cloth to wipe clean the surface of the broken glass and the frame before applying the glue. Follow the curing and application directions, which may vary from one product to the next. You may have to clamp the glass that has cracked with lightweight clamps designed to hold fragile materials, depending on the angle.

Once the adhesive is fully set, carefully place the glass into the window frame, ensuring it's flush with the edges of the frame, and there are no gaps between the glass and the window sash. Avoid flexing the glass as you put it back in place, as this could weaken the seal. This can lead to water infiltration or condensation.

If you have a glass window that is completely shattered or has larger cracks, consult a professional glazier such as O'Brien(r) to organise an exchange. Leaving broken glass unattended can be a risk to children and pets and is why it's important to act swiftly.