Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. They don't get rotten or rusty like timber and aluminum.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will save you from costly repairs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home, and could even be fatal. It is important to take the time to make sure that you're doing all you can to ensure that your windows are in good condition.

For single pane windows, it is fairly easy to replace them, and the new window will generally fit within the frame of the previous one easily. If windows with double panes are held together by internal beading, it is harder to remove and replace the old panes. In this case it is essential to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

If you are going to attempt to remove the glass panes yourself it is important to wear appropriate safety gear such as gloves that are thick and protective eyewear. It is also an excellent idea to lay down a drop cloth before you begin working on the glass to ensure that any shards will fall onto the cloth instead of onto the floor where they could be trodden under and cause further damage.

After the glass has been removed from the Window Repair, it's best to cover the gap with packaging tape or duct tape to stop drafts and water from entering the property until a professional is able to come out and repair the window. This also serves as an obstruction to prevent criminals from getting into your home. If the gap between the window and the door is substantial, you may want to use security screens that includes windows. This will provide the best of both.

2. Sagging

uPVC windows and doors are a low-cost, durable and energy-efficient alternative to timber sash windows. In time, they could develop a variety of issues that include sliding. A sagging window can cause problems with light, draughts and even security. It is crucial to act as soon as you notice your uPVC windows are sliding.

To fix a sagging window you can try repositioning the hinges. To accomplish this, you'll have to open the window so that you can access the frame. With the screwdriver, you'll be able to remove the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've repositioned the hinges, shut your window and check for an appropriate fit. If you're satisfied with the fit, tighten the screws until they remain in place.

If you are unable to reposition the hinges, you might need to replace the seal. Rubber seals can dry out and lose their elasticity over time, causing them to lose their tightness. If this happens, it's essential to replace the seal as quickly as possible to ensure your uPVC windows are watertight and safe from drafts.

uPVC handles may also become loose. Often this is due to screws that have become loose over time. However, it could be due to the fact that the handle mechanism has been worn out. It's relatively simple to repair a loose upvc door repairs near me handle. You'll first need to close the window and perform an initial fitting. The corner joints of the sash need to be aligned with the casing joint. If it isn't then you can use a screwdriver to loosen the handle and then reverse the mechanism back into position.

3. Water Leaks

If you wake up to damp floors and mouldy walls every time it rains it is important that you take action. The leaks of water through windows could cause structural damage to your home and affect your ability to regulate the temperature of your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is a simple fix that can be accomplished by any DIYer who has the ability. Based on the severity of the problem the caulking used previously may need to be removed before a new layer of caulk is applied. When it comes to uPVC repair, it is important to avoid 'over-caulking'. This can make your window harder to clean and reduce its energy efficiency.

Verify that the drainage holes have no debris inside them and that the sill pan has been properly angled to drain away from the window. In more serious instances, you might need to consider replacing the window.

Other indicators of water leakage are sills that are rotten and the appearance of black spots of mold on the walls near the window. This fungus thrives in humid conditions and can propagate quickly throughout the house.

It is also important to keep in mind that if the leakage is coming from between the glass in your double glazed windows it may be more likely to be an issue with the glass seal, rather than the frame or sliding. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and open in a breeze, it may be the hinges that are at fault. They can be repaired by any DIYer who is skilled and are usually completed in just a few minutes.

Like any mechanical component, hinges can be damaged over time. It's easy to change the hinges on a window repair however it is simpler if you have someone to help hold the frame.

Make sure that the uPVC hinges open and close in the proper direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.

Faulty window hinges could be caused by improperly opening the window in a certain way or by poor installation at the factory. Sending us a photo through our website can often solve the issue. We are more than happy to give advice.

Regular lubrication of the hinges is essential. Applying a light engineering lubricant on the hinges is a great method of doing this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window operate and close more smoothly. It can also stop corrosion and reduce the risk of sticking. This must be done at a minimum every year. WD40 and other solvent-based lubricants are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by a few various factors. The hinges can also become disaligned as a result of wear, which can cause a gap where the sash meets frame. They can be repaired by giving them good clean, but in the event that they are beyond repair it could be necessary to have them aligned or replaced. The interlock may be misaligned. This happens on the hinge's side, and may need to be cleaned. In some instances, it may be necessary to replace them.

The next most common reason for draughts are the window seals. These can become worn down or damaged over time and let air escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with glass that is low-emissivity, this will help to regulate indoor temperatures, and also lessen draughts.

One of the most effective methods to reduce drafts is to use an draught excluder. These are typically fabric tubes filled with some sort of filler and can be placed on the windowsill on top. These will help to stop cold air from entering and keep your home warm and cozy!

With a little regular maintenance and repair, your upvc windows will provide a great level of security and insulation for your home. However, it is important to realize that all windows have a life span and there may come a point where it is more efficient to replace them than fix them. If you have any problems with your upvc window it is recommended to speak with a professional as soon as you can.