Sliding Patio Doors Repair

local patio door repairs doors that slide open are ideal for enjoying your outdoor space, but they can be difficult to open or close. This can be due to many issues, such as dirty tracks or misaligned sliders.

Clean the track and making sure that the rollers are lubricated. You can also use the adjustment holes on the lower part of the movable panel to re-align your rollers.

Tracks that are damaged or dirty

A sliding door that does not slide as it should can be due to a dirty or damaged track. Over time dirt, grit and even rust can build up, preventing the track to move smoothly. The solution is a thorough cleaning with the use of a brush and mild detergent. It is recommended to complete this task frequently to ensure the smooth operation of your door and avoid the need for costly repairs down the road.

A door that is leaky is another common issue that requires prompt attention to prevent the growth of mold, water damage and structural degradation. Most often, the issue is due to worn weather stripping and doors that are not aligned properly, which can be fixed by replacing old weather strips and by aligning the door.

Rollers that veer off the track are a common issue that can be solved with a few minutes of DIY work. This can be a difficult task, so ask a friend to help you. To reposition the rollers to the right position, sit inside the house and lean one of the panels towards you. After lifting the panel off the bottom track, you'll need to place it on sawhorses in order to prevent it from falling off. Then, loosen the screws that keep each roller in place and take them off with a screwdriver. You can now remove any dirt that's stuck between the wheels and the tracks. Then, clean each wheel using denatured alcohol on a rag. Reposition the wheels on their tracks and then attach them once more.

It's possible to straighten bent track sections using a mallet made of rubber and a piece of wood. However, if the bent section is located near the hinges and has the potential to cause further damage, you'll be better off calling an expert to ensure safety.

Rollers that are not aligned

If your sliding door is having a problem sliding, it's likely that the roller wheels have been misaligned. The wheels could be dirty, rusted, or their bearings worn out. This causes friction between the bottom of the door and the track, causing it to snag or grind when it's closed or opened. It also makes squeaking noises.

Fortunately it's a simple fix. The wheels are on a bracket which can be adjusted, which means you don't need to take off the door. Use a screwdriver and find the holes for adjustment on the frame (usually on either side). Rotate the screws to turn the wheels. By turning the screw clockwise, you raise the wheel, whereas turning it counterclockwise will lower it. Continue adjusting until the door is moving effortlessly and quietly when it is opened or closed.

It is crucial to adjust the wheel prior to making adjustments to your latch. For the lock to function correctly the latch hooks need to be aligned with the strike plate. If you don't do this, the latch may open or close while you're out of the room.

Patio doors that slide are a major investment, and ensuring they are working properly will keep your family safe and secure. By fixing common issues such as damaged tracks, rollers or handles, you can prevent costly repairs in the near future. For more help with your patio doors, get in touch with our team. We can assess your sliding patio door repair needs and help you keep it in good condition. Our professionals are also able to assist with any replacement parts you might require.

The door frame is loose or damaged

Sliding patio doors are a wonderful addition to any home. They provide a convenient and attractive alternative to swing-open hinged or hinged patio door options. However, like any other type of hardware that they are, they could face a variety of problems in time. A lot of these issues are easy to fix by using a bit of DIY skills.

A gap in the frame is a frequent problem with sliding patio doors. This could be due to a variety of factors, such as a rollers or tracks that are not aligned properly, a damaged track or door, or a bowed frame for the door. In most cases, the problem can be fixed by taking the doors off and reconnecting the track. This must be done with extreme caution to avoid cause damage to the track or frame.

In some cases it may be required for the entire track to be replaced. This can be accomplished easily using an universal kit, which is available in all major hardware stores. These kits are simple to install and will have your door back to normal in no time at all.

It is essential to regularly inspect your sliding door frame and hardware for signs of wear and tear, for instance loose bolts or screws. This is an easy and effective DIY patio maintenance step that can be done with the help of a screwdriver. It is also essential to grease the rollers and tracks of your patio door to ensure smooth operation and to keep them from wearing out prematurely.

For many homeowners the patio doors are the primary entry point to their backyard as well as outdoor living space. As such, they need to be able to function properly in order to ensure the safety of their home and provide security. By following these easy DIY maintenance techniques, homeowners can prolong the life of their patio door and reduce costly repairs or replacements.

A faulty handle

Sliding patio doors provide the perfect way to access your backyard and to enter your home, but they can be difficult to operate if damaged or misaligned. A damaged handle could cause the door to get stuck or be difficult to open and close. The good part is that repairing loose handles is a simple task that can be done at home.

In most cases, a loose grip is the result of screws that have fallen out of the backplate. To fix the problem, tighten the screws on the inside of the handle with the help of a screwdriver. If you notice that the handle is still loose, it may be a sign that the threads have damaged and must be replaced.

A broken latch may be the cause. It is more likely that the latch will break if it is made of metal instead of plastic. If the latch is not catching or turning you can try oiling it first to see if it can help. If this doesn't work, you may need to replace the lock.

Finally, the handle itself can become difficult to operate if it is broken or damaged. If this happens it is necessary to replace it with a brand new handle that is in line with the design of your sliding patio door repair company near me door.

Feldco can help you restore your patio doors to their former splendor, whether they're brand new or old-fashioned. We have doors of high-quality in various sizes and styles that can be fitted to perfectly fit your home. For more information about our products, contact us now! We offer services to Southern California homeowners, including Ventura County and Orange County.

Unusual Weatherstripping

It's time to upgrade your weather stripping if see light in the windows and doors, or sense a draft pulsing at the window or door. These strips create a secure seal that keeps unwanted air, pests, or water from getting into your home. They also help keep your heated and conditioned air inside, saving you money on your energy bills all year long.

Based on the age of your weather stripping it may have deflated, and lost its bouncy positive seal. It is easy to determine this by taking a dollar note and running it under the seal on top of the door frame and below the jamb of the door where they overlap. If the dollar bill slides between the seal and door with ease then it's time to replace the weatherstripping.

It's tempting to cut off only the worn section of weather stripping and then replace it, but this will cause cracks on both sides of the new piece and may cause problems with the seal in the future. It's far more effective to replace the entire stripping so that you can rest assured that your door is sealed once more.

Follow our DIY guide to weather stripping and install the right material on your sliding patio door, and frame to ensure a strong and lasting seal. This is a great method to save energy costs and also fix your sliding patio door. Don't wait until it's too late. Your wallet as well as your home will be grateful.