Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. They are not susceptible to get rotten or rusty like aluminum and timber.

It is essential to clean and oil UPVC doors and windows on a regular basis. This will reduce repair costs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause serious damage to your home and may even be fatal. You should take the time to make sure that your windows are in good condition.

For single pane windows it is fairly easy to replace windows, and the new one is usually able to fit into the old frame very easily. However when windows with double panes are held in place by internal beading, it'll be more difficult to remove the panes that are in place and replace them with new ones. In this instance you'll need to find some plastic spacers that aid the new pane in being able to fit correctly into the frame of the window.

If you are going to try to remove the glass panes yourself it is crucial to wear the proper safety gear, including thick gloves and eye protection. It is also recommended to lay down a dropcloth prior to you begin working on the window panes to ensure that any shards of glass fall onto the fabric, not onto the floor, where they could be trampled under.

It's a good idea to cover the gap with tape after the glass is removed. This will keep drafts and water from entering your home until a professional arrives to fix the window. It also acts as an obstruction to prevent criminals from getting into your home. If the gap between the door and the window is significant, you may need to consider an alarm system that has windows. This will give you the best of both.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash window. In time, they could develop a number of problems such as sliding. A sagging uPVC window can cause issues with light, draughts and even security. It is crucial to act as soon as you realize that your uPVC windows are sliding.

Repositioning the hinges can help fix a window that is sagging. To accomplish this, you'll have to open the window so that you can get to the frame. With the screwdriver, you'll be able to unscrew the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've repositioned the hinges, close your window and test it for fitting. If you are happy with the fit of the window, tighten the screws to keep them in place.

If you cannot reposition the hinges, you could have to replace the seal. Rubber seals can dry out and lose their elasticity with time, which causes them to loose their elasticity. If this happens, it's essential to replace the seal as soon as possible to ensure your uPVC windows are watertight and secure from draughts.

UPVC handles can also become loose. Most often it is due to screws that have become loose over time. However, it could occur because the handle mechanism has worn out. It's relatively easy to fix a loose uPVC handle. You'll first need to close the window and perform an initial fitting. The corner joints of the sash should align with the casing joint. If it doesn't, you can make use of a screwdriver to loosen the handle and reverse the mechanism back into the position it was in.

3. Water Leaks

It is essential to take action if get up each morning to discover mouldy walls and floors that are wet. The leaks of water from windows do can not only cause degradation of your home's structure but also hinder your efforts to regulate the temperature within your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

It is a fairly easy fix and should be undertaken by any DIY expert. Based on the severity of the issue the caulking used previously may need to be removed before a new layer of caulk can be applied. When it is time to uPVC repair, you must avoid over-caulking. This will only make your window more difficult to clean and lower its energy efficiency.

Check that any drainage holes do not have debris in them, and also that the sill pan is properly angled to drain away from the Window Doctor. In more serious instances, you might have to consider replacing the window.

Mold spots and rotten sills are another sign of water leakage. The mold thrives in damp environments and is able to quickly spread throughout the home.

It is also important to remember that if the leak originates from the glass of your double glazing glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sliding. It is also possible to be repaired by a uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open, or if it opens in the breeze. They can be easily replaced by any competent DIYer and can be completed in just a few minutes.

Almost every household in the UK will have top-hung or side-hung uPVC windows that use hinges and, just like any mechanical component they are susceptible to wear and tear over time. It is essentially a simple process but it can be easier to do when you have a person to help you hold the frame up.

It is also important to verify that the uPVC hinges are opening and closed in the correct direction. You can check this by checking for the arrows on each hinge, this indicates which way the window should be opened.

The problem can be caused by opening the window improperly or by a poor installation at the factory. Sending us a picture via our website is often enough to resolve the problem. We are more than happy to offer advice.

Regularly lubricating the hinges is essential. This can be accomplished by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It also helps prevent corrosion and reduce the risk of sticking. This is recommended to be done at least once a year. WD40 or other solvent-based oils should not be used as they could damage your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by a few different things. The hinges may also become unbalanced due to wear, causing gaps where the sash and frame meet. These can be easily repaired by giving them a thorough clean, however when they're beyond repair, it might be necessary to have them aligned or replaced. The second is the interlock, which is located on the hinge of the window and can be misaligned. Again, it may be possible to give them a thorough clean, however in some instances it could be necessary to have them replaced.

The seals may wear out or be damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity lenses. This will help control indoor temperatures and lessen the possibility of draughts.

One of the most effective ways to cut down on the draughts in your home is to use a draught excluder, these are typically fabric tubes that are filled with some kind of filler. They can be put on the top of your windowsill. These will help to block out cold air and keep your home warm and cozy!

The windows made of upvc can keep providing excellent insulation and security to your home with regular maintenance and repairs. It is important to remember that all windows eventually become worn out, and it may be cheaper to replace them than to repair them. So, if you are experiencing issues with your Upvc windows, it's recommended to seek assistance from a professional immediately.