Ghost 2 Immobiliser Problems

It is designed to safeguard vehicles from key cloning and hacking the Ghost 2 immobiliser is a discrete device that is able to be installed without damaging your car. It stops your vehicle from starting unless you press the correct sequence of buttons inside your vehicle, similar to a password on a mobile phone.

Stop/Start

Ghost Immobilisers prevent vehicles from being stolen by blocking the engine from starting unless it receives the correct PIN code. This is done without altering the vehicle, and is undetectable by thieves. The unit connects directly to the ECU via the CAN databus to lock a vehicle. This system is very similar to the one that automobile manufacturers have used in their cars for years, however, the thief can't add a new key or use key relay technology to bypass it like they can with factory fitted systems.

Ghost is compatible with any vehicle with an engine, which includes motorhomes, vans, cars, caravans, and bikes. The same system is compatible with electric cars. It is a great alternative to wheel clamps and steering wheel locks.

When the Ghost is activated, it will stop all buttons in your car and stop the ignition from being started without a PIN code. This can be done using the Android or Apple mobile apps or by entering the code via your key fob. If the wrong code is entered, the app will show an indicator light and the Ghost will not allow the vehicle to start again. This is a great deterrent. in the event that the vehicle cannot be started, the burglar will then move on to a different area of.

The Ghost is tiny weatherproof device that is able to be concealed in the most difficult-to-access parts of your car. It is incredibly easy to install, taking an average of 20-30 minutes for each vehicle. It is also easy to take off if you decide to switch vehicles, or give it to a service center or valet parking. It is an TASSA (Tracking and Aftermarket Security Systems Association) insurance-approved system, which is recognized by a few insurance companies. It is also equipped with a safe emergency Pin Code override and features a Service/Valet Mode that can be activated with a button on the app or with your key fob.

Disarm

Ghost immobilisers are not mechanical anti-theft devices that can be removed, are concealed inside the vehicle. They are near impossible to bypass or hack and, even if they are discovered, a burglar cannot start the engine. A ghost immobiliser is protected from key cloning, as well as signal jamming and devices spoofing. These are techniques thieves employ to gain entry into vehicles equipped that have standard immobilisers.

The immobiliser transmits a code to the ECU. If a wrong code is sent and the vehicle is not started because the engine will not fire up. While it is possible to disable the ghost immobiliser with software, it is lengthy and complicated. The software can only be installed and used by an authorised installer.

The ghost immobiliser installer immobiliser is a tiny system that sits within the wiring loom of the vehicle and is not visible to the naked eye after it has been installed. It does not appear on diagnostic systems. There are no indicators with LEDs, and it doesn't communicate with the engine via the OBD port. It communicates silently through the CAN data circuit.

The system won't allow the vehicle to start unless it is provided with an input PIN number that is specified by the user. This can be entered using buttons on the steering wheel, door panels or centre console. This is a more secure method to protect the car, as it doesn't require an additional remote control or key fob.

Ghost also has a service mode that is activated through the mobile application. This lets you hand over your keys to someone else to use for service or valet parking, without having to enter a disarm sequence.

You should never remove the system from your Ghost by yourself, no matter whether it's in service mode. This can damage the engine. It is recommended to contact a TASSA-verified installer who can safely and effectively remove the system. Our most recent GHOST II immobilisers also come with a special QR fingerprint sticker that is hidden in various locations of your vehicle. which are linked to our global security register - in the event that the system is removed and is sold on the black market, it will be linked back to its original owner.

Anti-Hijack

Ghost Immobiliser 2 has a very useful anti-hijack feature. This system functions as a smart key and is among the most secure methods to keep your car safe from theft. Whenever the ignition switch is turned to on, and the car is stationary for a period of 30 seconds and the Ghost system will automatically stall the engine and turn the warning lights on. This gives the driver and passengers enough time to press the security button before the system is activated.

Contrary to many other systems that simply stop the engine when the ignition switch is turned on The Ghost system is based on a specific controller and timer that will close the valve that cuts off fuel in the event that it is activated within the set time, even when the ignition is turned on! This delay period must be long enough for the owner of the vehicle to leave the vehicle and stay a safe distance from the vehicle that is stalled before the system is activated.

In addition to the standard CANbus immobiliser blocking capabilities of the Ghost system, it also comes with an additional security level that blocks common hacking methods employed to gain access to modern cars such as relay attacks, key range extending and ECU swapping. The Ghost system communicates in a non-intrusive way and does not emit signals that could be picked by a thief using RF scanning or code-grabbing technology.

The Ghost system also comes with the Service/Valet mode that allows your vehicle to be temporarily re-started and driven without the requirement of PIN codes. This is perfect if you are parking your car and need to be away for a short period of time, such as for example to put groceries in the boot or open a garage door, etc. The system will then exit the service mode based upon the speed and time or by a simple PIN code input process. This gives you complete assurance that only you can drive your vehicle!

Keyless Entry

Many customers are now seeking out additional security measures due to the rising trend of thefts from cars using contactless. This is particularly applicable to those who have put time or money into personalising their vehicle and own rare/expensive vehicles. An add-on immobiliser can be an effective way to avoid this type of theft as it can stop your vehicle from starting unless the correct pin code is entered into your key fob.

Immobilisers are designed to impede a variety of vehicle circuits, including ones that control the starter motor and fuel pump. They also are able to shut off the car alarm in order to draw attention and scare off any potential thieves.

These devices communicate directly with the engine control unit through the CAN data network. They prevent the thief from bypassing it by installing a new ECU or by using key programmers. These immobilisers are installed in a discreet manner inside your vehicle, leaving no trace and are totally invisible to the tools sophisticated thieves use.

As opposed to other systems that require a specific app, or a tag that is worn on the driver's person and a Ghost immobiliser is only disarmed by pressing a pattern of electronic buttons that are already present on your steering wheel, door panel, and centre console, allowing you to choose a custom pin sequence. The pin can be changed as frequently as you'd like, meaning it's as secure as a credit card. It can be more difficult to crack due to the fact that it requires up to 20 presses.

Ghost also has a Valet/Service mode that lets you deactivate the system when your vehicle will be handed over for valet parking or for service and allows it to operate within predetermined parameters such as 30mph speed limits, so you don't have to worry about your vehicle being driven recklessly. It can then be reactivated by using the original key or corresponding entry code.

Installed by our accredited installers and certified installers, it is the most secure and reliable aftermarket CAN-immobiliser that is available. It is also certified by Thatcham for insurance purposes. The Ghost 2 immobiliser comes with six QR fingerprint labels as well as an ISR contact cards containing your unique QR codes, along with an emergency code that is secure. They are all stored in your purse or wallet.