Double Glazing Lock Repairs

The best locks for your doors and windows will help prevent burglars from entering your home. In general, they don't enjoy breaking glass or slipping through windows that are open.

However, some double-glazing owners have experienced problems with their door or window lock after it was installed. These issues can usually be solved without the need to replace double glazing.

Broken or Faulty Locks

If your uPVC door or window lock is broken or faulty and requires a locksmith, they can repair it for you. They can fix hinges, striker plates, and locks for double-glazing. They can also move the cylinder to fix any misalignment that could be causing your handle not to function properly.

If the key fits into the lock but doesn't turn or is difficult to insert the mechanism could be locked up. This can be caused by grime or dirt getting stuck within the mechanism. If this is the case, it might be possible to clean the lock and lubricate it. Use a dry lubricant like graphite or teflon but not oil as oil can attract dirt, and cause it to stick to the inside of the mechanism. After having lubricated, insert the lock key into the lock and turn it. The lubricant will work through the mechanism and the lock should be able turn with ease.

Screws that are loose within the lock mechanism are a different reason for a malfunctioning lock. They can loosen and fall out or even break off completely preventing the lock to perform as it should. A screwdriver is a tool to tighten the screws however, it is important not to over-tighten them as this can cause damage to internal components.

A faulty lock can be dangerous for both you and your family members, especially if you have small children. They can open the door without knowing and gain access to your home. If you're worried about this happening, then a locksmith who is vetted can provide fast and efficient assistance to secure your double glazing doors.

Misty Glaze are a professional uPVC and double glazing business in Lancing, who can repair any type of defective and damaged mechanisms, handles, cylinders and lock systems for both uPVC windows and doors. We can also reconfigure your uPVC or double glazing locking system to meet your particular requirements, which means that in many cases replacement windows and doors are not required.

Broken or Faulty Handles

As part of their overall security plan, many double-glazed windows have a multipoint lock. This is a great option for those who are concerned about criminals who are looking for ways to gain access to your home. Ask your locksmith for antilift locks. They can be installed in addition to existing locks and aid in keeping your windows closed.

Handle locks are usually damaged or fail. They are the first thing a criminal will employ to open your window. The good news is, this is one of the easiest parts to fix.

Modern uPVC and aluminium handles operate a multi-point locking system called Espagnolette that is designed to withstand forced entry. This security upgrade is offered as an option for new upvc repair windows. As an alternative upgrade older style uPVC or aluminium handles that are no longer in use can be upgraded to shoot bolt locking systems.

If a handle is defective, it's important to get this repaired as quickly as possible. The damaged handles could stop the window from closing properly and permit drafts to enter. It can also be a flaw that thieves can take advantage of, putting your family's belongings and your personal belongings at risk.

To repair the damaged mechanism, you must first access the window frame, then take off the broken handle. The gearbox that opens the handle is then accessed and the type identified, so that a replacement may be sourced which matches the profile of the internal window frame mechanisms.

Once the mechanism has been replaced the handle can then be re-affixed using the original screws - but we would recommend replacing them with larger ones because this will ensure an even more secure fit. The final step is to seal the handle with an opaque sealant. This will shield it from further deterioration. After this step is completed the window should be functional again, and at a fraction of the cost of replacing it.

Hinges that are broken or Faulty

If your windows aren't shut properly, draughts could be able to enter, your home's security barriers will weaken and there's an increased chance of damp or water damage. Windows hinges that break or fail are a common problem and can be fixed easily.

If your uPVC windows don't close or open it's likely that the hinges require to be replaced or repaired. A lot of window manufacturers will require that you purchase an entirely new window unit in order to resolve this problem, but we can replace the hinges to save you money.

Window hinges are often damaged due to repeated use or may be weakened through rust over time. If you find a broken hinge, it is important to take measures to prevent further damage by being careful not to make the window swing open or closed.

The type of hinge you are looking for will help you locate the correct parts to fix it. Maco, Mila and Roto are all window hinges. It is recommended to consult a professional in this case to avoid the mistake of purchasing parts that are not compatible with your current hardware and could cause further damage.

The hinges that are not working properly can cause big issue for your uPVC windows and doors. They can be a significant source of noise and also allow water infiltration which could damage your windows.

Check whether the pin barrels on both hinge halves are aligned. If it's not then tap the head pin with an hammer to create a shallow bend in the barrel of the hinge. This will help keep the pin in position. Ask a friend to hold the doors while you take off hinge screws and hinges. Replace the hinges and attach screws with glue. Finally fix the hinges using clamps or weights until the glue is drying.

Once the hinges have been fixed and repaired, you should be able to install the door and attach the handle. It is a good idea to replace the screws with the same length of wood dowels as the screw that was originally used so that they match up with each one.

Broken or Faulty Glass

While uPVC windows do a great job of keeping cold out and warm in, they are susceptible to becoming damaged over time. This can be the case with broken or damaged glass, as well as faulty locks. If left unattended, this can be a costly problem. It can also affect the aesthetics of your home and may lead to a loss of insulation, which is why it's important to repair any damage as quickly as you can.

If your glass is cracked but not shattered it is usually possible to repair it yourself using the appropriate tools and techniques. First, make sure the surrounding area around the glass is free of debris to ensure that any shards do not cause injury to anyone or are an accident-prone area. Then, remove any broken glass pieces and dispose of them in a proper manner. Apply masking tape over the entire area. This will prevent glass shards from sticking to your skin and scattering when you move them. Making sure the glass pane is fitted prior to adhering it to the wall is recommended if you are dealing with windows with two panes. This will ensure that you have enough space to complete your project.

Use a clean, dry cloth to wipe clean the glass's surface and the frame before applying the glue. Follow the curing and application instructions that may differ from one product to the next. Depending on the direction of the crack, you may want to secure the glass while it is curing. You can do this using lightweight clamps designed to hold delicate materials.

When the adhesive has completely cured, carefully reinstall the glass in the window frame, making sure it's flush with the edges of the frame, and there are no gaps between the glass and the window sash. Avoid bending the glass as you reinstall it, as this could weaken the seal. This could result in water infiltration or condensation.

Get in touch with a professional glazier, like O'Brien(r), to arrange an appointment to replace your glass if the window has been completely broken. If you leave broken glass unattended, it could pose a safety risk for children and pets and is why it's important to act swiftly.