Choosing uPVC Replacement Window Handles

Most customers agree that the upvc replacement window handles are easy to fit and feel like high-quality. However, it is important to realize that the kind of handle you choose should be appropriate for your window.

The primary factor is the step height that refers to the gap beneath the nose cost of replacement windows uk the handle to the base or frame. Other considerations include locking mechanisms and designs.

Replacement parts

There is a broad selection of replacement upvc window handles available to buy. They come in many different colours and styles so there is sure to be something that will fit your existing windows. It's easy to purchase a product on impulse especially when the handle is damaged. It is therefore advisable to check a few things before purchasing an alternative. The first thing to think about is the kind of upvc handle do you have now and what the difference between kinds is. The table below lists the most common handles to help you find the right one to match your window.

Espag handles are the most commonly used and are found on most modern double glazed windows. They are usually affixed to the frame by two screws that screw in from both above and below.

The spindle bar on the back could be of different sizes, and will determine if they're left-handed or right-handed. This is why it's important to take a measurement of the handle you have to ensure that you're ordering the correct replacement.

The arm is attached to the frame with two bolts, just like the Espag handle. However, the handle has a low projection so that it won't poke your blinds. This is an ideal choice if you have blinds on your windows made of upvc and you want to make sure the handle will blend with them.

Cockspur handles are similar to Espag handles, but they have a nose that closes over a wedge that rests on the frame of the window. This kind of handle is typically used on older Upvc windows and also on some wooden windows.

Tilt and turn handles are often found on casement windows. They can be operated by turning the handle or pushing at the top of the window. This allows you to open the window from inside and clean it from outside, without having to climb a ladder or walk across the fence. They also make a great option for people with restricted mobility. They can be an excellent method to improve security and accessibility at home.

Hints and tips

Many people will need to replace their uPVC window handles at some moment. When this happens it's a good idea to know a few tips and tricks that will help the job go as smoothly as possible.

Check what type of handle is in your home. Based on the type of handle and locking mechanism, it could be necessary for you to replace the lock and handle. If the roller cams and shoot bolts (espags) are blocked or seizing up, you'll have to replace them as well as the handle.

Thankfully, most uPVC handles are similar and follow industry standard sizing, which makes replacing them a fairly simple process. First, take off the screws on the handles. They are typically pozidrive screws. Once these are removed, you are able to take the handle apart.

It's a good idea to note how much the spindle sticks out from the base of your handle when you separate it. This will help you to determine the length of the spindle when you are looking for a replacement handle. To do this, determine the length of the square peg that sticks out from the top of the handle, and use that as a reference.

This is especially important for inline uPVC handles for windows, since they are always straight and only open left or right. They will not work in the middle. It's a good idea if you are not sure what type of handle you have in your home to borrow a handle to see how it works.

Another excellent way to figure out what the hand of the uPVC window handle is to look at how the handle rotates when operating. Handed handles can turn either clockwise or counter-clockwise. If you're unsure then you can always ask someone else to open the window with the handle, and figure out how it works in this manner.

Find the spindle's measurement.

The selection of the right replacement handle for your windows could be a challenge as different handles are not the same size. The spindle is what is the mechanism that locks the window. It is essential to ensure that when installing a new handle it is measured to the spindle length accurately to ensure it fits. There are many different kinds of uPVC window handles and they work in different ways, so it is essential to know the type of handle you have and the type of locking system.

The spindle of the handle extends out from the handle's rear and is attached to the lock gearbox inside the window frame. When you turn the handle, this turns the lock within the gearbox and opens the window. They are generally used on uPVC casement windows. They can be locked with keys to offer additional security.

Cockspur handles are commonly found in older double-glazed uPVC window frames. They have an "nose", which closes over a wedge shaped striker block. They are also relatively simple to use and can be locked using keys. These handles can be a little more difficult to find replacements for because they are not as common as the espagnolette handle.

If you have an open tilt and turn uPVC window, you'll require a particular type of uPVC replacement handle with a different locking mechanism. It will be able to tilt the window open but also rotate it around to fully open it. You will need to ensure that the handle you choose has a spindle size at least 55mm, or it won't be able to reach into the frame of the window.

You can use the same procedure to remove and replace this type of uPVC handle, but you must be cautious when removing the old one. You may have to open the window a bit wider than usual to ensure that you access both screws that attach it to the frame. Once you have put in your new uPVC handles and verified that they are in the correct position then tighten the screws and then test the lock to ensure it is working properly.

Replace the handle with the new one.

When you have the proper replacement handle it is easy to screw into the right place. This requires a screwdriver but may be easier with an electric one. When screwing the screws in, it is crucial not to over tighten the screws as this could cause the handle to break or warp.

The other important step when fitting the new handle is to install the spindle. It is the part that is inserted into the handle and controls the locking mechanism inside the window. It is crucial that the component is properly fitted to allow the window to open and shut securely.

There are many different kinds of uPVC window handles. There are several types of uPVC window handles.

Espagnolette Handles are handles inline which can be used to open tilt and turn windows.

Cranked Espagnolette Handles - these are similar to the inline handle but feature a curved design that is ideal for uPVC Replacement Window Handles windows in difficult-to-access locations.

Tilt and turn handles - These are used to control the opening mechanisms and closing mechanisms on tilt and turn. They also move windows.

These are the most commonly used and the majority of uPVC windows have these in place. In the UK, they are commonly known as "Bay Windows".

If your uPVC window handle is broken, it can be very frustrating. There is no need to change the entire uPVC windows due to a broken window handle. There are many simple steps you can take to repair and replace a damaged uPVC window handle.

You can repair your broken window handle quickly by identifying the model and measuring the spindle. When working with tools and windows it is crucial to consider safety first. But it is a easy task. It could be the difference between having a safe and secure home, or a window that is easily opened. If you have any questions or want to talk to a specialist about replacing your window handle, contact Bridgewater Glass. Our team is experienced and knowledgeable to help you with any issues.