Repairs to uPVC Windows

upvc window repair is a fantastic option for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they don't rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will help prevent costly repairs and increase energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a great amount of damage to your home, which can make it very hazardous and possibly fatal. It is important to ensure that your windows are in good condition.

For single pane windows it is relatively easy to replace them, and the replacement is usually able to fit into the frame that was previously installed easily. If you have double glazed window repairs-paned windows which are held together by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this situation you'll need to locate some plastic spacers that will help the new pane to fit correctly into the frame of the window.

If you are going to try to remove the window panes yourself it is crucial to wear appropriate safety gear that includes gloves with a thick layer of material and eye protection. You should also lay down a drop cloth before you begin working on the window panes, so that any shards fall onto the fabric and not on the floor, where they could be trampled.

After the glass has been removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to prevent water and drafts from entering the home until a professional comes out and repair the window. This will also act as a barrier, preventing any intruders from gaining entry to your home. If the gap between the door and the window is significant, you may prefer a security screen that also includes windows. This will give you the best of both.

2. Sagging

uPVC windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber windows made of sash. In time, they could develop a number of problems such as sagging. A sagging uPVC windows could cause issues with light, draughts, and even security. If you find that your uPVC window is beginning to sag it is important to act swiftly to prevent the problem from becoming worse.

To fix a window that is sagging you can try repositioning the hinges. First, you'll need to unblock the windows to get at the frame. Then, remove both the top and bottom hinges using a screwdriver and adjust them clockwise or counter-clockwise. Close your window to test the fit after you've relocated your hinges. If you're happy with the fit, you can tighten the screws until they remain in position.

If you are unable to reposition the hinges, you may need to replace the seal. Over time, rubber seals lose their elasticity and become dry and cause their tightness to decrease. It is essential to replace your seal as soon as you can in order to ensure that your uPVC window waterproof and draughtproof.

uPVC handles may also become loose. Often this is due to screws that have become loose over time. However, it could be due to the fact that the handle mechanism has worn out. It's relatively easy to fix a loose uPVC hand. You'll first need to close the window and then perform an experiment fitting. The joint at the corner of the sash should be aligned with the joint on the casing. If it isn't then you can use the screwdriver to loosen the handle. Then, turn the mechanism to position.

3. Water Leaks

It is important to take action if wake up every morning to discover mouldy walls and wet floors. Water leaks from windows not only lead to the degrading of the structure of your home but also undermine your efforts to control the temperature inside your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be accomplished by anyone who is a DIYer with the skills. Depending on the severity of the problem is, the old caulking may have to be removed. It is essential to remember that when it comes to uPVC window repairs, do avoid the temptation to "over-caulk' as this will only make the area harder to clean and can reduce your energy efficiency.

It is crucial to make sure that the drainage holes are clear of debris and that the sill pan has been angled properly so that it drains away from the window. In more serious cases, you may need to replace the window.

Mold spots and rotted sills are another sign of water leakage. The fungus thrives in damp conditions and can spread quickly throughout the house.

If the leakage occurs between the double-glazed glass it is more likely that the problem is with the seal rather than the frame. This can be easily fixed by an uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault if your uPVC window is difficult to open, or if it blows open with the breeze. These are easily repaired by any skilled DIYer and can be completed in just a few minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that use hinges and, just like any mechanical component they can wear down over time. It's easy to change a window hinge but it's much simpler if you have someone to help you to hold the frame.

It is also important to ensure that the uPVC hinges are opened and closed in the right direction. This can be done by looking for the arrows on each hinge. This shows which way the window should be opened.

The problem with the hinges on windows could be the result of incorrectly opening the window in a certain way or due to poor installation at the factory. Sending us a picture via our website is often enough to solve the issue. We are happy to provide assistance.

Regularly lubricating hinges is also essential. This can be done by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also reduce the risk of a window sticking and help prevent corrosion. This is recommended to be done at least once a year. WD40 or other solvent-based lubricants should not be used since they can damage your upvc window repair windows.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of various factors. The hinges may also become disaligned as a result of wear, creating gaps where the sash and frame meet. This can be easily fixed by giving them a thorough clean, however in the event that they are beyond repair it may be necessary to get them aligned or replaced. Secondly the interlock, this is on the hinge side of the window, may also become misaligned, again it may be feasible to give them a clean but in some cases it might be necessary to have them replaced.

The second most frequent cause of draughts is the window seals, these can become worn down or damaged over time and allow air to escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the window with low-emissivity glass, this will help in regulating indoor temperatures and will reduce draughts.

The last way to reduce drafts effectively is to use a Draught-exclusion device. These are usually made of fabric tubes filled with a filler, which can be hung over your window sill. These will keep your home warm by blocking out cold air.

With a little maintenance and repair windows made of upvc will continue to provide a great level of security and insulation for your home. It is crucial to realize that all windows have a lifespan and there may come the point when it's more cost-effective to replace them rather than fix them. If you are experiencing issues with your Upvc window it is recommended to speak with an expert as soon as you can.