Bio-Fires - An Eco-Friendly Alternative to Real Fires

Biofires offer a warm, cosy form of heat with no harmful gasses or soot. They are easy to set up, just like an electric fire.

The BARDA-funded contract supports development of the BioFire Emerging CoV Panel, a nucleic acids amplifying test that can be used with BioFire FilmArray Systems for detecting known and emerging human coronaviruses in nasopharyngeal and oropharyngeal swabs and saliva specimens.

Eco-friendly

A bioethanol fire is an excellent alternative to wood or gas fires. The fuel is created using plant by-products, and an organic process converts sugars into alcohol. Bioethanol has numerous advantages over other types of fireplaces which include the absence of harmful emissions and a much less carbon footprint. Bioethanol is a healthier alternative to other types of fireplaces because it doesn't create smoke or soot. It also does not require a flue, which means it can be used anywhere in your home or in your garden.

Multi-drug resistant bacteria (MDR) are among the most dangerous health threats of today. New testing methods can detect MDR bacteria early and prevent any further complications. One such test is the BioFire FilmArray multiplex PCR system. This test utilizes the symptom-driven method to identify the most frequent pathogens that cause sepsis. The results are available within an hour, so healthcare providers can begin treatment immediately.

Molecular PCR is a process that amplifies DNA or RNA molecules into millions or billions of copies. This allows you to analyze small samples of tissue or body fluid for the presence of certain genetic sequences. It is an excellent tool for laboratory professionals and will help them identify serious illnesses in a cost-effective and efficient way. The BioFire film array PCR system is an ingenuous tool for infectious diseases diagnosis. It can be used in a variety of locations, including hospitals and laboratories.

For respiratory tests, a simple swab can be applied to your nose and sent to the lab for analysis. BioFire's system lets clinicians take action quickly and has a short turnaround time. This means fewer waiting for results and better patient outcomes.

The Chanouf Farm-Biofire company created an Agroforestry waste recycling unit which utilizes pear and olive tree waste to create biochar and biomass energy. The products are offered to the public to replace traditional wood charcoal and coal briquettes with green alternatives. In addition, these bio-waste products can be burned in the Kachelofen fire, which provides radiant heat that is a green alternative to gas and electric fires.

Clean burning

When you make use of a bio fire you aren't just reducing energy consumption, you're also helping the environment by using a sustainable fuel source. This is because the combustion of bioethanol doesn't release any harmful gasses like carbon dioxide. It releases only heat and water vapour. This makes it a cleaner and safer alternative for indoor use.

Ethanol can be produced by the fermentation of sugars from plants. It is an energy source that is renewable. This means it can be made quickly and won't be depleted as fossil fuels such as coal and oil. Bioethanol reduces dependence on imports from abroad and increases the chance of shortages.

Bio-fires are easy to install and can be used in existing fireplace ethanol insert openings or as a freestanding unit. This makes them a great alternative to wood and gas fires. They are also a great choice for offices and homes without chimneys or flues.

When a bio ethanol fuel fire-fire is ignited the burner is outfitted with a special media that absorbs the liquid ethanol fire fuel and makes it ready for combustion. The ethanol fuel is ignited in the flames, and the smoke are released into the air through the vent. This makes the flames appear more natural and creates an amazing beauty that cannot be replicated with gas or real wood fires.

Another big advantage of bio-fires is that they don't require a flue or vent to replenish the oxygen used during combustion. They also don't create the carbon monoxide that must be vented into the air in open fronted gas fires.

The BioFire Respiratory Panel uses multiplex technology that simultaneously tests for 19 respiratory pathogens in about an hour. This allows doctors to detect and eliminate respiratory diseases more quickly than they could by using standard lab tests that require patient visits. This reduces time and costs for both the patient and health healthcare system.

Safe indoors

Bio-fires are much safer to use indoors than traditional fires, since they produce no smoke or ash, nor carcinogenic fumes. They also don't release carbon monoxide, which can be deadly if inhaled. The bio-ethanol fuel that they use is flammable, however it is important to be careful when handling the burner and refilling your fire. It should be replenished only after the burner is switched off and the fire is cool, and any spills must be cleaned up immediately.

The company's diagnostic FilmArray system, BioFire Torch and BioFire 2.0--are easy-to-use and can run eight different diagnostic panels cleared by the US Food and Drug Administration and three additional panels that are approved for use in emergency situations and six environmental test panels. These tests include a new respiratory panel that has been designed to quickly identify and differentiate between respiratory illnesses such as COVID-19 and bioethanol Fireplace inserts the emerging coronaviruses.

The Biomedical Advance Research and Development Initiative, a part of the US Department of Defense Strategic Access Program has awarded the COVID-19 panel with a grant. The COVID-19 test is an antigen-based one that allows clinicians to differentiate between the symptoms caused by COVID-19 and other respiratory illnesses with nearly the same accuracy as rapid antigen tests currently being used.

The company is also developing a SARS-CoV-2 test for its Respiratory Panel 2.1. The multiplexed nucleic acid amplification assay will be available on the BioFire FilmArray 2.0 and Torch Systems, and will detect SARS-CoV-2 and 21 other respiratory pathogens in nasopharyngeal and saliva specimens within less than one hour. The assay is being developed using an rapid timeframe and submission to FDA for EUA and 510(k) clearance is anticipated in the third quarter of 2020.

Bio-ethanol flame effect fires are safe to use, however they should be kept away from objects that are combustible, such as pillows, curtains and blankets. They should not be set close to anything that could ignite and you should keep flammable materials at least 10 feet from them. The bioethanol fuel should be stored in an area that is dry and secure so that pets or children are unable to reach it.

Simple to use

A bioethanol fireplace is easy to install and has no flue to be concerned about. All you need is a place to put it and some fuel. Once you've filled the burner and lit it, ignite it. This will give the appearance of an actual flame. Once the flame is started it will heat the room with very little or no smoke. It also produces heat similar to a wood-burning fireplace. They are also simple to maintain and don't require any servicing. Just a quick clean is all they need.

In contrast to other tests that are quick however, the BioFire RP2.1-EZ test employs a syndromic approach to identify common symptoms of infectious diseases and can return results in just 45 minutes. This test is suitable for patients with upper-respiratory symptoms and has a specificity of 98 percent. The test can identify 19 viruses and three bacteria in one sample which makes it an excellent option for managing patients.

The BioFire platform integrates multiplex testing, sample preparation, and results reporting into one platform. This allows laboratories to simplify their workflow and eliminate the need for a sequential method that involves sending out individual tests. This can lead to improved patient outcomes as the right test is used first time, and the need for expensive culture-based tests is eliminated. The BioFire system can identify pathogens on a cell level as well as their antimicrobial resistance gene. This information is more sensitive than the conventional methods.

Molecular diagnostics are being used to improve the care of patients and outcomes. The BioFire RP2.1 plus panel employs the syndromic approach to simultaneously target 23 of the most commonly involved pathogens in respiratory infections. The assay can be performed on the BioFire FilmArray 2.0 and Torch systems and delivers results in about 45 minutes.

In the US, this assay is available currently under FDA Emergency Use Authorization (EUA), and will be made available commercially after initial DoD demand is met. The BioFire Defense team has also developed a fully automated test-to-result assay that allows for the rapid identification of COVID-19. The test is currently in development, and will be available once the initial DoD demand is met.