Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain and durable, as well as long-lasting. They do not decay or rust as timber and aluminum.

It is crucial to wash and oil UPVC doors and windows on a regular basis. This will prevent unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows can cause significant damage to your home, and could even be fatal. It is important to take the time to make sure that you're doing everything you can to keep your windows in good condition.

For single pane windows it can be relatively simple to replace them, and the new window will usually fit inside the frame that was previously installed easily. If windows with double panes are joined by internal beading, it is harder to remove and replace the panes that were previously in use. In this case, you will need to locate some plastic spacers that aid the new pane in being able to fit correctly into the window frame.

If you're planning attempt to remove the window panes by yourself it is important to wear the proper safety gear such as gloves that are thick and eye protection. It is also a good idea to lay down a drop cloth before you start working on the glass so that any shards fall onto the fabric instead of landing on the floor where they can be trampled upon and cause further damage.

After the glass has been removed, it's a good idea to cover the gap with packaging tape or duct tape to stop water and drafts from entering the property until a professional is able to come out and repair the window. This also serves as an obstacle to stop intruders from making their way into your home. If the gap is particularly large, you may be interested in an alarm door that comes with an integrated window, since this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber windows made of sash. However, over time, they may be afflicted by a variety of issues, including sliding. A sagging uPVC windows can cause issues with light, draughts and even security. It is crucial to act as soon as you notice your uPVC windows are sliding.

Repositioning the hinges can aid in fixing a window that is sagging. First, you'll need to open the windows so you can get at the frame. Then, using an screwdriver, unscrew the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. After you've repositioned the hinges, close the window and check for fitting. If you are happy with the fit of your window, you can tighten screws to secure them in the right position.

If you cannot reposition the hinges, you might need to replace the seal. Rubber seals can dry out and lose their elasticity with time, causing them to lose their tightness. If this happens, it's essential to replace the seal as soon as you can to ensure that your uPVC windows are watertight and secure from draughts.

uPVC handles could also become loose. The majority of the time, this is caused by screws that have come loose over time. However, it could occur because the handle mechanism has worn out. It's fairly simple to fix a loose uPVC handle. You'll first need to close the window and perform an experiment fitting. The joints at the corners of the sash must align with the joint on the casing. If it doesn't, you can make use of a screwdriver to loosen the handle and then turn the mechanism back into its original position.

3. Water Leaks

It is essential to act if you awake each day to find a smoky wall and floors that are wet. Water leaks from windows can not only cause degrading of the structure of your home but also undermine your efforts to regulate the temperature inside your home. The most frequent reason for leaking uPVC windows is that the sealant surrounding the frame is damaged or missing.

This is a fairly simple fix and should be undertaken by any competent DIYer. Depending on the severity of the issue is, the old caulking may have to be removed. When it comes to uPVC repair, it is important to avoid 'over-caulking'. This will only make your window harder to clean and decrease its energy efficiency.

Verify that the drainage holes are free of debris inside them and that the sill pan is angled correctly to drain away from the window. In more extreme cases, you may need to replace the window.

Other indicators of water leakage include rotted sills and the appearance of black spots of mold on the walls near the window. The fungus thrives in damp conditions and can spread quickly throughout the home.

It is also important to remember that if the leak is coming from between the glass in your double glazed windows, it's more likely to be a problem with the glass seal rather than the frame or sagging. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and blow open in a breeze, it may be the hinges that are at the fault. They can be easily repaired by any DIYer who is skilled and can be done within a few minutes.

Most households in the UK will have top-hung or side-hung uPVC windows that have hinges and, like all mechanical parts, they are susceptible to wear and tear over time. It's easy to change a window hinge, but it's easier if someone helps hold the frame.

Verify that the uPVC hinges are closed and open in the proper direction. You can do this by checking for the arrows on each hinge. This indicates the direction in which the window should open.

The issue could be caused either by opening the window incorrectly or by a poor installation at the factory. It is usually possible to fix the issue by sending us a photo through our website and we will be happy to give you suggestions.

It is also crucial to ensure that the hinges are lubricated regularly. Applying a light engineering lubricant on the hinges is a great method of doing this. We recommend using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also prevent corrosion and reduce the risk of sticking. This must be done at a minimum once a year. WD40 and other solvent based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a few different things. The hinges can also be misaligned due to wear, creating gaps where the sash and frame meet. If they are beyond repair, it could be required to realign them. The interlock, which is located on the hinge side of the window, can also become misaligned, again it is possible to give them a thorough clean, however in some cases it might be necessary to get them replaced.

The seals may wear out or become damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glasses. This will help regulate indoor temperatures, and reduce the risk of draughts.

Lastly, one of the most effective ways to cut down on draughts is by using a draught excluder. These are typically fabric tubes that are filled with some kind of filler. They can be put on top of your windowsill. These will keep your home warm by blocking cold air.

With a little regular maintenance and repairs, your upvc windows will continue to provide an excellent level of security and insulation for your home. It is crucial to realize that all windows have a life span and eventually, they will reach a point where it is more economical to replace them than repair them. If you are experiencing issues with your Upvc repairs Near me window, it's best to consult a professional as soon as possible.