Double Glazed Window Repairs

Double glazing is a great investment for your home, but it can be a pain when it isn't working properly. Most issues can be fixed and you don't need to replace doors or windows.

Double-glazed windows are made up of two glass panes separated by a thin gap. This gap is filled with an insulating gas such as the gas argon. This increases a window's efficiency.

Broken panes

While double-pane windows are more resistant to breaking than single-pane glass, they may break or shatter. If a pane is broken in your double glazing, it's crucial to fix it as soon as possible to avoid water and energy loss.

You can select either a temporary repair or more intensive epoxy fix depending on the degree of the crack. A temporary repair can help prevent further cracking and will keep out cold air and rain. A more extensive repair will strengthen the crack and will provide an even stronger seal.

To replace a double-pane damaged window, take the frame off and place it on an even surface. Then, apply a grid of duct tape on the pane to prevent any glass pieces from falling off during removal. After the tape has been installed, remove the old double-pane glass out of the frame. Next, clean the rabbet and grooves using a wire brush and vacuum or wipe them with a damp cloth. Remove the wood molding if needed and scrape off all metal glazing points before installing the new pane. Finally, apply a silicone caulk over the rabbet and UPVC Double Glazing Repairs grooves in order to ensure a secure fit.

If you're trying to repair a damaged glass by yourself, begin by sanding it until it's smooth and free of paint. You can also use a heating gun to soften any putty or glazing points. Once the rabbet has been cleaned and dried, you can use a putty knife to force ropes into place. Make sure that the putty is of an even thickness, and that it presses evenly against the glass and frame.

If you're looking for a longer-term fix an epoxy repair is a better option than replacing. This method requires more effort and a longer wait time but it's more appealing and last longer than a temporary repair.

Condensation

Condensation is a frequent problem with double-glazed windows, however, it doesn't mean that they're not functioning properly. The fact that your windows show condensation is actually a positive sign because it means that your double glazing is doing what it's supposed to keep the cold out and the warmth in.

It's actually water vapour from your home that condenses on the glass's surface when you observe condensation. It's quite a natural phenomenon and it's not something that's likely to cause harm to your windows unless you let it sit on the glass for a long time.

The reason for internal condensation is usually too much humidity or low temperatures in the room. This results in cold surfaces, like windows which attract moisture that is high dewpoint (the temperature at which water transforms into a liquid). The steam from showers, kettles and hot pots as well as the cooking pans can also cause humidity around bathrooms and kitchens.

Do not hang wet clothes close to windows and ensure that your Upvc Double Glazing Repairs frames are properly ventilated to prevent moisture buildup. You should also ensure that your double glazed windows are correctly insulated and installed with the correct gap (6mm is best) to maximize energy efficiency. You can also install one-way air vents on your windows to increase the insulation. If you're still seeing condensation,, then there's problems with the gaskets or seals and this is definitely an issue that requires the expertise of an expert.

Draughts

A double-glazed window that is draughty is an indication that the seal between the glass panes has broken and will require to be replaced. This will affect the insulation of your home and can cause an increase in energy bills which is why it's crucial to act quickly when you notice this issue.

A window repair service will replace the sealed unit for you, and restore the efficiency of your windows. They can also replace existing frames with new energy-efficient features, including glass units that are filled with argon, as well as thermal spacer bars that will reduce heat loss and reduce your heating bills.

Draughts can be caused by problems with the locking mechanisms of double-glazed windows and doors, so it's important to have these checked. Older uPVC window locks are notorious for becoming stiff with time, but it's easy to fix this by lubricating them regularly with an expert uPVC cleaning product.

Having a professional double glazing company carry out repairs will ensure that the repair is completed properly. They'll have the appropriate tools to ensure that your window is completely resealed and watertight. They'll also be able to fix any other damages to your frame so you can enjoy your beautiful new double glazing with confidence.

Double glazed windows are long-lasting and hard-wearing, but they may develop issues as a result of wear and tear or weather. If you notice any of these issues, call your local double glazing repair service immediately to get them fixed in the shortest time possible. You'll be happy that you did it. A double glazing installation that is repaired properly will give your home a an impression of quality, and will also save you money on energy bills!

Smudging

Double-glazed windows are made up of two separate panes with the spacer or gas between. This creates a solid seal that stops heat from getting out of the frame. They're a great option to save energy and reduce your carbon footprint. However, double-glazed windows can experience a variety of issues that could impact its performance and UPVC Double Glazing Repairs endurance. This includes condensation, mist, and being difficult to open or close.

Difficulty opening your double glazed windows could be due to the weather or it could be due to a problem with the hinges, handles or mechanism. It is possible to solve the issue by lubricating and wiping the windows with cold water. Contact the company that supplied you with the windows as soon as you can to have them fixed.

This is a common issue which can be easily fixed. Again, it's worth checking the warranty to see what, if any, repairs are covered under this warranty.

Fogged and foggy glass can be caused by moisture in the panes. It's typically a sign of faulty seals or a double-glazing system that needs replacing. It's a relatively straightforward fix and you'll often do it without the need to replace the entire window, which will reduce the cost of replacement.

To correct this issue, a technician will drill tiny holes to let out any moisture between the glass panes and the rest of the window. Once the moisture is gone the new anti-fog coating is applied and the window will be sealed. Sometimes, the window may need to be removed but, in most cases, it can be done from within the home.

Mist

Mist can be a big issue for older double glazing, especially when it happens on the outside and inside of the windows. It is due to an issue with the seal designed to prevent air and moisture out between the two panes. During the manufacture of double-glazed units the seal is made by sealing both panes with an airtight butyl or polysulphide seal around the edges of the glass and the spacer bar. This is intended to protect the window from heat and prevent the window from leaking. It isn't easy to clean windows with mist because you have to break the seal in order to clean them.

The issue with mist is that it lets moisture to enter, which ultimately causes condensation between the glass panes. This is because there is huge differences in temperature between the internal and external surfaces of the glass. The moisture then gets trapped in the spaces and creates an appearance of milky white. This can be quite ugly and can be difficult to eliminate.

Some companies claim that they can repair misting double-glazed windows by drilling holes into the unit and injecting chemical through the holes that absorb moisture from the inside. It's not an end-to-end solution and it's more cost-effective to replace the entire double-glazed unit.

It is recommended to keep your windows clean and ventilated regularly. It's also an excellent idea to install extractor fans in kitchens and bathrooms and wipe windows with a damp cloth to prevent the accumulation of moisture. If you are unable to avoid the problem, we recommend that you replace your double-glazed windows with new A-rated windows to increase the efficiency of your energy bills.