Subaru Impreza Key Problems

The Subaru impreza key allows owners to lock and unlock their vehicle with the press of one button. The most common cause for the key fob to stop working is a dead coin battery in the key fob.

It is easy to change the battery. Find the small unit that houses the round flat cell within the casing that holds the key. Replace the battery by opening the unit and making sure that the correct side of the battery is facing up.

Keys lost or stolen

We've all experienced this when you reach into your pocket to find the keys, but they are not to be found. Luckily, it's rarely difficult to find your subaru key car keys, and there are a variety of ways to replace them quickly and cheaply.

If you already have a standard car key, you can have it duplicated at a store that stocks subaru key programmer blanks. They're usually marked "Subaru". If they require replacing the battery on the key fob, they can find a CR-2032 in most hardware stores or online retailers such as Amazon.

For the key fob or remote/intelligent key, you'll need to visit an automotive locksmith that can program new keys to your Subaru model. It will cost between $50 to $250, based on whether your Subaru comes with a transponder chips or smart key feature.

To get a new key programmed, you'll need to give the locksmith or dealership your vehicle identification number (VIN), which is located on the dashboard, near the windshield. They will need this number to confirm that your car is covered by warranty and that the new key has been encoded for the specific model and year of your Subaru. The VIN also contains details about the manufacturer of the car, the place where it was manufactured, and whether it comes with any particular features, like an immobilizer to prevent the engine from starting if the incorrect key is used.

Key fob is not working correctly

There are a myriad of reasons the key fob isn't functioning correctly. It could be as simple as a battery issue or a more complex repair. A dead battery, programming issue with the car or other electrical issues with the vehicle are some of the most common problems with a Subaru keyfob.

The battery for the key fob can be replaced quickly. They are readily available at hardware stores, as well as big box retailers. They are priced at around $10 and can be replaced in just a few minutes. How to do this should be included in the owner's instruction. YouTube has many videos that will guide you through the process.

Another possibility is water damage to the key fob. It is possible that taking it out of your pocket and getting it wet can affect the retaining clips made of steel that hold the battery in place. If the key fob is not working after replacing a subaru key the battery, the problem could be due to the circuit board for the transmitter or other components in the vehicle. A technician with experience in troubleshooting a vehicle can determine the cause and pinpoint the issue. They can reprogram subaru key the key fob to ensure it is compatible with your vehicle. They can also check whether there are any wiring or antenna issues that stop the key fob from sending signals properly.

Locking or Unlocking Issues

If your Subaru Impreza key fob won't lock or unlock the doors, it could be a range of causes. A dead battery inside the key fob or a malfunctioning receiver, signal interference, water damage or a key that is paired that needs reprogramming are all possible causes of this problem. To remedy this, you can visit an authorized locksmith or a dealer to have the key fob reset.

If you're not able to open the trunk the key fob might have the trunk lock setting set to "on". This is a security measure that helps prevent thieves from stealing the car. Contact your SUBARU dealership to change the settings of the trunk lock/unlock.

A locked steering wheel can also happen when a car locks itself automatically after a sharp turn. This happens when the car detects a sharp turn, which may affect the transmission system and engine. To prevent this from happening, it's recommended to slow down when making turns.

Make sure you check that the replacement keys or spare key that you have was cut and programmed by the dealer or locksmith. Make sure that the emergency key will be able to work on the trunk and any door cylinders since this is the only way to get back in your vehicle in the event that you are locked out. Verify that the spare or new key does not have any scratches or signs on it.

Keyless Entry

Many subaru replacement keys models are equipped with keyless entry. This lets you lock or unlock the trunk and doors by pressing the remote. The system utilizes a radio signal to connect with the vehicle once you are within distance. There are many different devices that support this feature. They range from simple kits which unlock only the door of the driver, to more sophisticated ones that support remote start and smartphone connectivity.

It's safe and convenient to have keyless entry on your Subaru, but you should know what to do in the event that the buttons stop functioning. You can attempt to solve the issue at your home, but you might have to bring your Subaru in for a professional diagnosis. You can use these tips to keep your remote control working in the way it should.

If your Subaru's key fob is wet, it's a great idea to clean the electronic chip from it with isopropyl alcohol and let it dry completely before putting the battery back in. This will stop moisture from damaging the fob and causing problems later on.

If your key fob is not responding, you can turn off the engine by opening the door on the driver's side. Press the door button one time to unlock it and the second time to close it. You'll need to press the button a number of times, usually one for each digit until you hear the sound. Then, repeat the process with each door until you get a response from all of them.