Door Handle Replacement

It's worth it to replace door handles if you don't like the way they look, or if they're difficult to use. With a little patience, you can get the new handle in no time.

Modern door handles are typically equipped with cover plates that conceal the screws to give them an attractive appearance. If the new handle doesn't have screws already attached, you will have to attach them separately.

Removal of the Old Handle

Door handles aren't just an important for their aesthetic value to your home, but they're also crucial for safety as they let you lock and unlock your door. As time passes the door handle can start to lose its grip or feel loose. It might also appear worn out and old. This is a clear indication that it's time to replace your door handle.

If your door handle is becoming difficult to use, it could be time to replace it. This is a problem because it means you can not lock or unlock your upvc door handle, which could create the risk of security for you and your family.

Another reason to replace the door handle is if it's damaged or broken. A broken door handle can be very dangerous, especially when your children or elderly family members struggle to open it, and get trapped within. Fortunately, it's fairly simple to fix a damaged door handle by simply replacing the old one.

Modern door handles are usually standard sizes and should fit any door. If you are not certain that the new door handle you are buying will work, take off the old one and take measurements of its holes in the housing. This will help you buy the right door handle.

The easiest method to remove your old door handle is to take it off of the patio door handle itself. Usually it is a matter of using a screwdriver. Some door handles have the cover plate, which conceals the screws that mount them. You'll need to remove this to get to the screws. After removing the old handle, make a note of the way the spindle has been connected. This will assist you in aligning the new handle.

You can also remove the door handle by unscrewing the latch mechanism. This is usually done with an screwdriver however you'll need to locate the small latch, which should be just to the left of the trim piece. After you have removed the latch, take the handle off the strike plate, and then the latch away from the door's edge.

Remove the Strike Plate

If you are replacing your handle, you'll also be required to replace the latch plate, which holds the hole which the door's latch hooks into when it closes. The new handles will have two latch plates which are a circular and a rectangular plate (see the image above that shows the parts of the door handle). If your current latch plate has rectangular in shape, swap it out for the round one, so that the latch hooks onto the strike plate in a manner that makes the handle more comfortable to operate.

The first step is to remove the screw that's holding the old latch plate in place. The screws can be very tight, and will require some force to loosen. It might be beneficial to have a second person assist with this task if you can.

After the screws are removed the latch should pull out of the door with ease. If the latch plate is stuck or refuses to move, use a small hammer to scrape the edges. This can sometimes open the plate up.

Now you can prepare the new strike plate for installation. Install the latch plate in the door jamb using the screws that came with the new Double glazed handles. Be careful not to over-tighten the screws, as this could cause damage to the strike plate.

If you're not sure whether the latch plate is in the right position You can try closing and then opening the door to check whether it locks and closes correctly. If not, you'll need to adjust the strike plate either up or down, or even forward or back, until the door closes and latches properly.

If the door is still jiggling or moving, you may need to increase the size of the hole for the latch in the strike plate. This is more frequent on older doors. It could be caused by wear and tear, hinges that are too small, a wrong size latch, or a damaged strike plate. If this is the case you can use a metal file instead of a chisel, or hammer to adjust the strike plate.

Take off the Latch

The latch is a bent metal piece that slides in and out of a hole on the inside of your door. The latch moves forward when you turn the handle. It also connects to a hole in the frame of the door to keep your door closed. If your door is wiggles when you close it, replacing the latch might be the only thing needed to fix it.

The screws that secure the door latch are difficult to see however, you can put a screwdriver in a small hole in the trim plate, and then pull the latch off. After you've removed your trim plate, it'll be simple to take off the latch and the bolts that keep the spindle and latch in the position.

If the latch cannot be easily removed, use a paperclip or tool to remove it from the handle mechanism. Place the item into the recessed slot of the latch, and gently twist it or jiggle until the that the latch and handle are beginning to split. You may need to repeat this several times before the latch is loose enough to pull out.

You should be able slide the new latch into its slot without issues after you've removed the old one. Make sure that the latch is properly positioned in the slot and aligned with the screw chambers and then use the new screws to attach it to the strike plate and door frame.

Before installing the new handle, be sure to measure your existing backset (the distance from the centre of the big hole on the front surface of the door to the edge). Also, make sure that the latch size on the new handle matches the measurement of your existing handle.

If you're replacing the handle or latch or handle, or if the old lock cylinder is damaged then you'll require a new one. If you're not changing locks the new lock will fit inside your existing recess, and will work with your current keys. Be sure to choose a latch with rectangular cover plates that match your handles.

Take off the cover plate

You can replace your door handles with a contemporary design of roses and levers to make a difference in the appearance of your home. You can buy complete sets of escutcheons, the escutcheons as well as privacy adaptors and escutcheons.

The first step in replacing the door double glazing window handle inside is to remove the cover plate or rose, which conceals the screws and mechanism inside. Utilize a flathead to take off the plate. It may have a slot on one edge or be held by pins.

Remove the screw holding the handle inside and place it aside when the cover plate has been removed. You'll also need to remove the screws that hold the latch and the plates inside to the door, which you can accomplish by loosening them with the help of a Philips screwdriver. Take the inner plates and latch from the door. Place them aside.

Some doors don't have this gap. If it doesn't, you'll need to make a hole in the door for the new handle. The process for doing this is the same procedure for opening a door with a lock, but you'll be taking extra care to avoid damaging the frame or door.

Installing new screws for the door knob is required after the holes have been drilled. Make sure to buy the same size as the old ones, to ensure that you do not end up with a handle that's too tight or loose. Installing a new strike rod and latch is also necessary. These aren't included in most door handle sets.

Amazon's Choice FAERSI 2-piece chrome finish handle sets are a great choice if you're in the market of a premium interior door handle replacement set. It's a factory fit and has received hundreds of five-star reviews from satisfied customers. It's a great option to replace damaged or worn door handle hardware inside your Chevy HHR.