Repairs to uPVC Windows

uPVC is a great option for modern homes. They are long-lasting, durable and easy to maintain. They are not susceptible to decay or rust as aluminum or timber.

It is important to clean and oil UPVC doors and windows regularly. This will reduce repair costs as well as improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large deal of damage to your home, making it very hazardous and possibly fatal. It is important to take the time to ensure that you're doing everything you can to ensure that your windows are in good condition.

For single pane windows it is fairly easy to replace them, and the replacement will usually fit inside the old frame very easily. However If windows with double glazing panes are held in place by internal beading it will be more difficult to take out the old panes and put in new ones. In this case it is essential to purchase plastic spacers in order to help the new pane fit into the window frame.

If you are going attempt to remove the window panes by yourself, it is essential to wear the proper safety gear, including thick gloves and protective eyewear. You should also lay down a dropcloth before you begin working on the window panes, so that any shards of glass fall onto the fabric and not on the floor which could cause them to be trampled under.

It's a great idea seal the gap after the glass has been removed. This will prevent drafts and water from getting into your property until a professional is able to fix the window. It also acts as a barrier that will prevent any intruders from gaining entry to your home. If the gap is large, you might want to consider using a security door that has an integrated window, since it will provide the best of both worlds.

2. Sagging

Upvc is a long-lasting and energy efficient alternative to timber sash windows. Over time, they can develop a variety of issues, including sagging. A sagging uPVC windows can cause problems with light, draughts and even security. It's crucial to act immediately if you notice your uPVC windows are sliding.

To fix a sagging window you can try repositioning the hinges. To do this, you'll need to open the window to access the frame. Then, using a screwdriver, you can take off the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. After you've repositioned the hinges, shut your window and verify the an appropriate fit. If you're satisfied with the size of the window, tighten the screws to secure them in place.

If you cannot reposition the hinges, you could need to replace the seal. As time passes, rubber seals lose their elasticity and become dry, which causes them to loosen. It is essential to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

uPVC handles may also become loose. This is typically caused by screws that have been removed over time, but it could be due to the handle mechanism wears out. It's fairly simple to fix a loose uPVC hand. You'll first need to close the window and perform a test fitting. The corner joints of the sash should be aligned with the casing joint. If it isn't, you can use a screwdriver or a wrench to loosen the handle, and then reverse the mechanism back into its original position.

3. Water Leaks

If you're waking up to damp floors and mouldy walls each time it rains it's important to take action. The leaks of water through windows could cause structural damage to your home, and hinder your ability to control the temperature in your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be completed by anyone who is a DIYer with the skills. Depending on the severity of the issue is, the old caulking may need to be removed. When it comes to uPVC repair, you should be careful not to over-caulk. This will only make your window harder to clean and lower its energy efficiency.

It is important to check that any drainage holes are free of debris and that the sill pan is placed correctly so that it drains away from the window. In more serious cases you might have to consider replacing the window.

Mold spots and rotten sills are other signs of water leakage. The mold thrives in damp environments and can quickly spread throughout the house.

It is also important to note that if the leak originates from the glass of your double-glazed windows, it's more likely to be an issue with the glass seal rather than the frame or sliding. This can be easily corrected by a upvc repairs near me window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window is difficult to open or if it opens in an ease. They can be repaired by any DIYer who is skilled and can be completed in just a few minutes.

Like any mechanical part hinges will be damaged over time. It's very simple to replace a hinge on a window however it is easier if someone helps hold the frame.

Verify that the uPVC hinges are open and closed in the proper direction. This can be done by looking for the arrows on each hinge, this indicates which way the window should open.

Faulty window hinges could be caused by improperly opening the window in a particular way or due to improper installation in the factory. Sending us a picture via our website will often solve the issue. We are always happy to offer advice.

It is also crucial to grease the hinges regularly. This can be accomplished by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regularly lubrication will help the window open and close more easily. It can also prevent corrosion and decrease the chance of sticking. The ideal time to do this once a year. WD40 or other solvent-based lubricants should not be used as they can damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by different things. The hinges, also because of wear and tear, may become displaced, which can cause a gap to form between the sash and the frame. These can be easily repaired by giving them good clean, but if they are beyond repair it may be necessary to get them aligned or replaced. The interlock may also become disaligned. It is located on the hinge side and could require to be cleaned. In some instances, it may be necessary to replace the hinges.

The next most common cause of draughts is the window seals, these are prone to wear or damaged over time, and let air escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass, this will help to regulate indoor temperatures, and also reduce draughts.

The last way to reduce draughts effectively is by using a Draught-exclusion device. These are usually fabric tubes filled with a filler, which can be placed over your window sill. These will keep your home warm by blocking out cold air.

With a little maintenance and repairs your windows made of upvc will continue to provide a great level of security and insulation for your home. It is important to remember that all windows will eventually wear out and it could be more cost-effective to replace them instead of fixing them. If you are experiencing issues with your upvc window it is recommended to speak with a professional as soon as you can.