Ghost 2 Immobiliser Problems

The Ghost 2 immobiliser, designed to guard cars against hacking or key cloning, is a discreet device which can be installed without damaging your vehicle. It stops you from starting your vehicle unless you press the correct sequence of keys in your vehicle. It is similar to a mobile password.

Stop/Start

Ghost immobilisers stop vehicles from being stolen by preventing the engine from starting until it is issued the correct PIN code. This is done without modifying the vehicle, and is not detected by thieves. The unit communicates with the ECU on the CAN data bus, which allows it to lock the vehicle. This system is very like the one car manufacturers have been using in their vehicles for a long time however, the criminal cannot add a new key or use key relay technology to bypass it, as they could with factory-installed systems.

A Ghost can be fitted to any van, car, motorhome, caravan or bicycle that has an engine. It is compatible with all major brands of vehicles. The same system can also be utilized on electric vehicles. It's a great alternative to steering wheel locks and wheel clamps and can be installed with minimal effort.

When the Ghost is activated, it will block all buttons in your vehicle and stop the ignition from being started without a PIN code having been entered first. This can be done via the Android or Apple mobile app or by entering the code via your key fob. If the wrong code is entered, the app will show an indicator light. The Ghost will then refuse to let the vehicle to be restarted. This is a great method to deter thieves. If the vehicle cannot be started and they are unable to get it started, they will leave.

The Ghost is a weatherproof small device that can be hidden behind the most difficult-to-access parts of your vehicle. The installation process takes between 20 and 30 minutes for each vehicle. It is also easy to take off if you decide to switch vehicles, or even give it to a service center or valet parking. It is a fully TASSA (Tracking and Aftermarket Security Systems Association) insurance-approved system that is recognised by a number of insurance companies. It is also equipped with a secure emergency Pin Code override and features a Service/Valet mode that can be activated using the application's button or with your key fob.

Disarm

Ghost immobilisers, unlike mechanical anti-theft devices that can be removed, are hidden within the car. Even if they were to be found in the car, thieves wouldn't be able start the car. They are virtually impossible to bypass or hack. This is because ghost immobilisers prevent key hacking, signal jamming and device spoofing - techniques that are used frequently by thieves to gain entry into cars fitted with standard immobilisers.

An immobiliser functions by sending an instruction to the ECU (electronic control unit). If a wrong code has been received and the vehicle doesn't start as the engine won't fire up. It is possible to disable a ghost immobiliser by using the aid of a software program, however it would be extremely difficult and time-consuming to accomplish this. The software must be installed and used by a authorised installer.

The Ghost immobiliser, which is a tiny device, is hidden in the wiring loom of the vehicle. It is invisible to the naked eyes once installed. It is not visible on diagnostic systems, there are no LED indicators, and it does not communicate with the engine via the OBD port. It communicates in silence through the CAN data loop.

The system will stop the vehicle from starting until it is given a specific PIN code sequence. This is entered through buttons on the steering wheel, door panels or centre console. This is a better way to safeguard the car since it doesn't require an additional remote control or key fob.

Ghost also has a service-mode that can be turned on via the mobile application. This allows you to give your keys to someone else to use for service or valet parking, without having to enter a disarm sequence.

You should not remove the system on your Ghost by yourself, no matter whether it is in service mode. This could damage the engine. It is recommended to speak with an installer certified by TASSA who will safely and correctly remove the system. Our latest GHOST II immobilisers also come with an exclusive QR fingerprint sticker that is hidden in different areas of your vehicle, which are linked to our international security register. In the event that the system is removed and then sold on the black market this will link it back to its original owner.

Anti-Hijack

The anti-hijack function is a key feature of the ghost immobiliser range rover Immobiliser 2. This system is a smart key that guards your car from thieves. Whenever the ignition switch is switched to on, and the vehicle is stationary for 30 seconds and the Ghost system will automatically stall the engine and turn the hazards lights on. This allows the driver or passengers time to press a secret security button (depending on the vehicle) before the system is activated and the engine is once again allowed to begin.

The Ghost system, unlike many competitors, utilizes a timer and controller unit which shuts down the fuel shut-off valve 14 after a set period of time. This is regardless of whether the ignition remains on. This delay time period must be sufficiently long to allow the owner of the vehicle who was hijacked of the vehicle to move away from the location of the hijacking and a sufficient distance from the vehicle in which it is stuck before the system can reactivate.

The Ghost comes with an additional layer of security that prevents common hacking methods used to gain entry into modern cars like relay attacks and key range expanding. This is due to the fact that the Ghost system communicates in a quiet manner and doesn't emit any signals that could be detected by a thief using code grabbing or RF scanning technology.

The Ghost system also features the Service/Valet mode that allows your vehicle to be started temporarily and driven without the requirement of a PIN code. This is ideal when you park your vehicle and have to leave it for a brief amount of time, for example to put groceries in the boot or open a garage door etc. The system will exit the service mode according to the speed and time or through the simple input of a PIN code process. This will give you complete peace-of-mind that only YOU are able to drive your vehicle!

Keyless Entry

Many customers are now seeking additional security measures due to the growing trend of contactless car theft. This is especially relevant for those who have invested time or money into personalising their vehicle and own rare/expensive vehicles. Immobilisers with add-ons are a great method to stop this type of theft since they prevent your vehicle from starting until the correct pin code is entered, along with your key fob.

Immobilisers are made to block various vehicle circuits such as those that control the starter motor and fuel pump. They also are able to shut down the car alarm to draw attention to and frighten away any potential thieves.

These devices communicate with the engine control unit (ECU) through the CAN data circuit. They also they stop thieves from trying to bypass it by installing a brand new ECU or by using an engine key programmer. These immobilisers are installed discreetly in your vehicle, leaving no marks and are totally invisible to the tools sophisticated thieves use.

In contrast to other systems that require a separate application or tag to be carried on the driver's person, a Ghost immobiliser can only be disarmed by pressing a pattern of the existing electronic buttons on your steering wheel, door panel and central console, allowing you to choose a custom pin sequence. The pin can easily be changed to make the device as secure as a bank card. It is also more difficult to hack since it requires as many as 20 presses.

Ghost also has the option of a valet/service mode that allows you to deactivate the system if your car is to be turned over to valet parking or for service and allows it to operate within predetermined parameters such as 30mph speed limits and you don't have to worry about your car being driven at a reckless speed. It is then reactivated using the original key or the key that corresponds to the entry code.

Installed by our accredited installers, it is the most secure and reliable aftermarket CAN-immobiliser on the market. It is also accepted by Thatcham for insurance purposes. The Ghost 2 immobiliser is also supplied with six QR fingerprint labels and an ISR contact card containing your unique QR code and an emergency number that is secure which can be kept in the purse or wallet of your vehicle.