How to Replace a saab key programmer 9-3 Key

The Saab 9-3 has a good deal of appeal for drivers. It is powerful and has excellent visibility. It has a very high safety rating.

It is nevertheless important to make sure that you have at minimum two keys that work for your car. It can be expensive to replace a key if you lose it.

How to replace the ignition Key on the Saab 9-3

If your car's key doesn't start in the ignition and you want to replace it, reprogrammed you'll need to replace it. This guide will guide you through the steps to do it on a Saab 9-3. You will need a replacement key and a new battery that can be reprogrammed and a new key-fob case.

In contrast to older models, the majority of modern Saab cars use a transponder on the key-fob, instead of a physical key made of metal to unlock and start the car. The issue with this is that the reprogrammable battery on the key-fob will eventually wear out and not hold a charge for any longer. This is especially when you keep using the same key with the same lock.

A professional locksmith can replace the battery quite easily. You can also do it yourself if have the proper tools and a bit of patience. The first step is to remove the key-fob. This is done by inserting a flathead screwdriver into the slot that is located in the middle of the case. You must be careful, as the plastic is thin and can easily be damaged.

Once the case is opened, you can make the new key by combining lower part of the old key with the transponder and banana. This will ensure that the new key is connected to the CIM properly, which can make a big difference when replacing the original key for your Saab 9-3.

How do you replace the ignition Key in a Saab 900

If you don't have two keys you'll need to remove the steering wheel and dashboard to access the ignition. Begin by disconnecting the negative battery cable. After the battery has been disconnected, you can remove the trim and dashboard pieces that surround the steering wheel. Once the dashboard is removed, you can insert a screwdriver in the opening behind the ignition switch.

The ignition barrel is equipped with a key lock that could prevent the vehicle from starting if it doesn't have the key in it. If your 900's ignition isn't working, check the key to see if it's in the lock or is stuck in the ignition barrel. It's also recommended to rotate your keys often and keep them clean so that one doesn't get bent.

Saab cars differ from other cars because they don't have traditional keys made of metal. The car instead recognizes the electric signals generated by the key fob using a special microchip in it.

If you lose your sole working key fob the dealer will charge the highest dollar for replacing the computer module (known as the CIM). We can reprogram the EEPROM of your existing computer and allow it to accept new keys without having to replace it. This will save you over 50% of the cost the dealer charges! We call it the SAAB KEY PROGRAM. Find out more here!

How do you replace the ignition Key in the Saab9-5

The metal component of classic Saab keys is simple to copy and does not represent a significant risk to theft of vehicles. The electronic part of the key-fob has a chip that recognizes the car when the key is inserted into the ignition switch.

Saab's anti-theft device has been relying on this technology for over a decade. It's not as effective as a physical door lock, but it makes stealing your car much more difficult. Every Saab owner must keep a spare Saab key in their car.

The majority of new Saabs are delivered with two keys, but they are also available for purchase at an dealer by using a handheld device known as a Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception is for NG 9-3 cars, which have newer, more modern features that require a separate key-fob to use a different method of operation.

The dealer will replace the CIM or TWICE module on those cars if the keys are lost, and they'll charge you a high price for this. We can reprogram your computer's EEPROM to accept new keys, without replacing expensive modules.

How to replace the ignition Key in the Saab XC90

If your SAAB 9-3 key fob begins having problems turning the barrel of the lock it could be time to replace it. The process is fairly simple and you don't have to go to a dealership. You can do it at home using a few basic tools.

In the beginning, you'll need to prepare the new key. Before you begin, disable the anti-theft by placing blocks underneath your rear wheels and engaging your handbrake. Next, insert the key into the ignition and move it to the on position that activates the accessories, but doesn't start the engine. Repeat this process 5 times, and then put the key in the "on" position.

The next step is to purchase a new case for your key fob. You can find these at any auto parts store and they're usually quite affordable. You can buy them without electronics, based on the model.

To open the case, gently push the flathead screwdriver into the slot in the middle. Once you split the case, you'll have access to all of the internal electronic components. To remove the electronics use a small screwdriver, and reprogrammed try to pry them out in a gentle manner.