Repairs to uPVC Windows

uPVC is a great option for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they are not susceptible to corrosion or rot.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will prevent unnecessary Repair My Windows And Doors costs and improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows could cause severe damage to your home, and could even be fatal. It is essential to take the time to ensure that you're doing all you can to keep your windows in good shape.

For single pane windows it is fairly easy to replace them, and the new window is usually able to fit into the old frame very easily. If windows with double panes are held together by internal beading, it will be harder to remove and replace the old panes. In this situation, it is necessary to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

If you are going attempt to remove the glass panes yourself it is important to wear appropriate safety gear such as gloves that are thick and protective eyewear. You should also lay down a drop cloth before you begin working on the window panes to ensure that any shards of glass fall onto the fabric and not onto the floor, where they could be trampled.

Once the glass has been removed, it's a good idea to seal the gap with clear packaging tape or duct tape to stop water and drafts from getting into the home until a professional is able to come out and fix the window replacement. It also acts as an obstacle to stop intruders from making their way into your home. If the gap is particularly large, you might be interested in the security door with an integrated window, since it will provide the best of both worlds.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash windows. However, with time, they may be afflicted by a variety of issues, including sliding. A sagging uPVC windows can cause issues with light, draughts and even security. It's important to take action immediately if you notice your uPVC windows are sagging.

Repositioning the hinges can aid in fixing a window that is sliding. To accomplish this, you'll need to open the window so that you can access the frame. Then, you can remove the hinges at the top and bottom using a screwdriver, and then adjust them counter-clockwise or clockwise. After you've repositioned the hinges, close the window and test it for fit. If you're satisfied with the fit, you can tighten the screws to ensure that they remain in position.

If you can't reposition the hinges, you may need to replace the seal. Over time rubber seals can lose their elasticity and become dry, which causes their tightness to decrease. It is important to replace your seal as soon as you can to ensure that your uPVC window waterproof and draughtproof.

uPVC handles may also become loose. The majority of the time it is due to screws that have become loose over time. However, it could occur because the handle mechanism has worn out. It's relatively simple to fix a loose uPVC handle. You'll first need to close the window and do an initial fitting. The corner joints of the sash must be aligned with the casing joint. If it isn't, you can use a screwdriver or a wrench to loosen the handle and then return the mechanism to its original its original position.

3. Water Leaks

It is important to take action if wake up every morning to discover mouldy walls and floors that are wet. Water leaks from windows are not just a cause for degrading of the structure of your home but also undermine your efforts to regulate the temperature within your home. The most common cause for leaking uPVC windows is that the sealant surrounding the frame is damaged or missing.

This is a fairly simple fix and should be undertaken by any DIY expert. Depending on how severe the issue is, old caulking might need to be removed. When it is time to uPVC repair, you should avoid over-caulking. This will make your window harder to clean and lower its energy efficiency.

Verify that the drainage holes have no debris in them, and also that the sill pan has been properly angled to drain away from the window. In more serious instances, you may need to think about replacing the window.

Mold spots and rotten sills are other signs of water leakage. This fungus thrives under conditions of dampness and can spread quickly throughout the house.

If the leakage occurs between the double-glazed window, it is more likely the issue is more related to the seal, not the frame. A uPVC specialist can easily solve this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open or if it blows open with an ease. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Like all mechanical parts hinges will be damaged over time. It's easy to replace a hinge on a window however it is easier if someone else helps hold the frame.

Check that the uPVC hinges are closed and open in the correct direction. Check for the arrows on each hinge to determine which way the window should be opened.

The issue can be caused either by opening the window improperly or by a poor installation in the factory. Sending us a photo through our website can often solve the issue. We are more than happy to provide advice.

Regularly lubricating the hinges is also necessary. Applying an engineering lubricant that is light to the hinges is an ideal method of doing this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also stop corrosion and reduce the possibility of sticking. This should be done at least every year. WD40 and other solvent based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a variety of various factors. The hinges can also be misaligned due to wear, causing an opening between the frame and sash. These can be easily repaired by giving them thorough clean, however when they're beyond repair, it could be necessary to get them realigned or replaced. Secondly the interlock, this is located on the hinge of the window, may also be misaligned, and again it's feasible to give them a good clean, but in some instances it could be necessary to get them replaced.

The seals may wear out or be damaged over time, allowing air escape. Replacing these with high-quality weatherstripping is a good way to keep draughts at bay. Another alternative is to replace the window with glass that is low-emissivity, this will help to regulate indoor temperatures, and also reduce the possibility of draughts.

Lastly, one of the most effective ways to cut down on the draughts in your home is to use a draught excluder, these are usually fabric tubes that are filled with some type of filler. They can be positioned on the windowsill on top. These will help to block out cold air and keep your home warm and cosy!

Your windows made of upvc will keep providing excellent insulation and security to your home with a little regular maintenance and repairs. However, it is important to realize that all windows have a lifespan and eventually, they will reach a point where it is more efficient to replace them than repair them. So, if you are experiencing issues with your Upvc windows, it's recommended to seek help from a professional as soon as possible.