Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are durable, long-lasting and easy to maintain. They do not rot or rust like aluminum or timber.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will reduce costly repairs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home and may even be fatal. It is essential to take the time to make sure that you're doing everything you can to ensure that your windows are in good condition.

Single-pane windows are relatively simple to replace and typically fit into frames of the past easily. If you have double glazing near me-paned windows that are held together by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this instance you'll need find some plastic spacers to help the new pane to fit perfectly into the window frame.

If you're planning to attempt to remove the glass panes yourself it is important to wear the appropriate safety equipment that includes gloves with a thick layer of material and protective eyewear. It is also recommended to lay down a drop cloth before you begin working on the window panes so that any shards of glass fall onto the fabric and not onto the floor which could cause them to be trampled.

It's a great idea seal the gap after the glass is removed. This will keep drafts and water from getting into your property until a professional is able to repair the window. This will also provide a barrier to prevent any intruders from getting into your home. If the gap is large, you might want to consider using the security door with an integrated window, as it will provide the best of both worlds.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash window. In time, they could be affected by a variety of issues, including sagging. A window that is sagging can cause problems with light, draughts or even security. If you find that your uPVC window is beginning to sag it is important to act swiftly to stop the issue from getting worse.

Repositioning the hinges can aid in fixing a window that is sliding. To accomplish this, you'll need open the window to access the frame. With a screwdriver, you can remove the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, close the window and test it for fit. If you're happy with the fit, you can tighten the screws to ensure that they stay in the right place.

If you are unable to reposition the hinges, you could have to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, which causes them to loosen. If this happens, it's essential to replace the seal as quickly as you can to ensure that your uPVC windows are waterproof and safe from drafts.

uPVC handles may also loosen up. This is usually due to screws that have become undone over time, but it can be caused by the handle mechanism wearing out. It's relatively easy to fix a loose uPVC handle. The first step is to close the window and perform an initial test fit. The corner joints of the sash must be aligned with the casing joint. If it doesn't then you can use a screwdriver to loosen the handle, and then reverse the mechanism back into its original position.

3. Water Leaks

If you awake to damp floors and mouldy walls each time it rains, it is important that you take action. Water leaks from windows are not just a cause for destruction of your home's structure but also undermine your efforts to control the temperature in your home. Most of the time, uPVC window repairs leaks are caused by damaged or missing sealant.

This is a relatively easy fix that can be completed by any DIY expert. Depending on how serious the problem is, the old caulking may need to be removed. When it is time to uPVC repair, you must avoid over-caulking. This can make your window harder to clean and decrease its energy efficiency.

It is important to check that any drainage holes are free of debris and that the sill pan is angled correctly so that it drains away from the window. In more serious cases you may need to think about replacing the window.

Mold spots and rotted sills are other signs of water leakage. The is a fungus that thrives in damp conditions and can quickly spread across the home.

If the leakage occurs between the double-glazed glass, it is more likely the issue is more with the seal than the frame. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window is difficult to open or if it opens in a breeze. Any competent DIYer can replace the hinges in a matter of minutes.

Like any mechanical part, hinges can wear out over time. It is essentially a very simple procedure, but it is easier when you have a person to help hold the frame up.

It is also important to verify that the uPVC hinges are opening and closed in the right direction. This can be done by looking for the arrow on each hinge, this indicates the direction in which the window should open.

The issue could be caused either by opening the window incorrectly or a faulty installation in the factory. This issue can be fixed by sending us a photograph via our website and we will be happy to give you advice.

Regularly lubricating the hinges is essential. This can be done by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also decreases the risk of a window sticking and help prevent corrosion. This should be done at least once a year. WD40 and other solvent based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different factors. Firstly the hinges, again due to wear and tear may become displaced, which will cause a gap to form where the sash joins the frame. This can be easily fixed by giving them a good clean, but when they're beyond repair, it might be necessary to have them realigned or replaced. The interlock may also become misaligned. It is located on the hinge's side and could require to be cleaned. In some cases, it may be necessary to replace these.

These seals can wear down or become damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping will help to stop draughts. Another option is to replace the upvc window with low-emissivity glass. this will help in regulating indoor temperatures and again will lessen the risk of draughts.

One of the most effective ways to reduce the draughts in your home is to use a draught excluder, these are typically made of fabric which are filled with a kind of filler. They can be placed on top of your windowsill. These will keep your home warm by blocking out cold air.

The windows made of upvc can keep providing excellent insulation and security for your home with regular maintenance and repairs. It is crucial to keep in mind that all windows eventually wear out and it is cheaper to replace them rather than repair them. If you are experiencing problems with your upvc windows, it is always recommended to seek help from a professional immediately.