How to Replace a Saab 9-3 Key

The Saab 9-3 is an excellent car that provides a lot of appeal for drivers. It has excellent visibility and an efficient engine. It also has an excellent safety rating.

It is important that you have two keys that are compatible for your vehicle. It could be costly to replace a key if you lose it.

How to Replace the Ignition Key in the Saab9-3

You must change your car key if it won't turn. This guide will teach you how to replace the ignition key on the Saab 9-3. You'll need a new key with a reprogrammable battery, and a new key-fob case.

Unlike older models, most modern Saab vehicles use a transponder on the key-fob instead physical metal key to unlock and start the vehicle. The reprogrammable batteries in the key-fob inevitably wear out, and they can't hold any charge. This is especially relevant if you continue to use the same key for the same lock.

A professional locksmith can replace the battery quite easily. You can also do it yourself if you have the necessary tools and a little bit of patience. The first step is to take the key-fob out. Insert a flathead into the slot that is in the middle of your case. The plastic is very thin and is easily damaged.

Once the case is open then you can prepare the new key by combining the lower portion of the old key with the transponder and banana on the new key. This will ensure the new key is properly connected to your CIM and could make a huge difference when replacing the sole key of your Saab 9-3.

How to Replace the Ignition Key in a Saab 900

Unless you have two keys, you'll have to take off the steering wheel and dashboard in order to access the ignition. Begin by disconnecting the negative battery cable. Once the battery is disconnected, you can remove all the trim pieces and dashboard pieces that surround the steering wheel. After the dashboard has been removed, you can insert an opening with a screwdriver behind the ignition switch.

The ignition cylinder is equipped with a key lock which could stop the vehicle from starting if you don't have a key. If your 900's ignition switch isn't working, look at the key to see if it's in the lock or snared into the ignition barrel. It's also an excellent idea to rotate your keys on a regular basis and clean them regularly so that one doesn't get bent.

Saab cars differ from other cars because they don't have traditional keys made of metal. Instead, the car is able to recognize electric signals from the key fob through a special microchip in it.

If you lose your sole working key fob the dealer will charge you top dollar for the replacement of the computer module (known as the CIM). We can reprogram the EEPROM of your existing computer and enable it to accept new keys without the need for replacement saab car keys. This can save you more than 50% of what the dealer charges! This is the SAAB KEY PROGRAM. Learn more about it here!

How do you replace the ignition Key in a Saab9-5

The metal part of classic saab 9-3 key fob programming keys is easy to duplicate and doesn't present a major threat to vehicle theft. The real protection is the electronic component inside the key-fob. It is equipped with a chip that detects the car when it's inserted into your ignition switch.

saab 9-5 key replacement has relied on the technology of this anti-theft system for over a decade. It's not as good as a physical lock on the door but it makes stealing your own car significantly more difficult. That's why every Saab owner should always keep an extra key available.

The majority of new Saabs come with two keys right from the factory. However, you can buy more keys from an agent using a handheld computer called a Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception to this is NG 9-3 cars, that have newer, more modern features that require a separate key-fob, and operate using a different procedure.

The dealer will replace the CIM or TWICE module on those vehicles if all keys are lost, and charge you a premium for doing it. We can reprogram your computer's EEPROM to accept new keys, without replacing expensive modules.

How to Replace the Ignition Key on the Saab XC90

If your saab 9 3 key replacement 9-3 key (please click the next post) fob is having issues turning the lock barrel, it may be time to replace it. It's fairly simple and doesn't require you to visit an agent. You can do it at home, using a couple of basic tools.

First, you'll need to make the new keys. Before you start, ensure that the anti-theft system has been disabled by placing blocks on the rear wheels, and then adjusting the handbrake. Insert the key in the ignition and turn the key to the "on" position. This will activate the accessories but will not start the engine. Repeat this 5 times, and then put the key in the "on" position.

The next step is to find a new case for your old key fob. They can be found in most auto parts stores and are usually inexpensive. Depending on the model, you can even purchase them without electronics.

To open the case, put an flathead screwdriver into the slot in the middle and slowly work it. The case will break easily and, once you've done that, you'll have access to the internal electronics. To remove the electronics, use a small screwdriver and attempt to pull them out gently.