Repairs to uPVC Windows

uPVC is a great option for modern homes. They are long-lasting, durable and easy to maintain. They do not decay or rust as aluminum and timber.

It is important to clean and oil UPVC windows and doors regularly. This will help avoid unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is damaged, it can cause a huge amount of damage to your home, making it very hazardous and possibly fatal. You should take the time to make sure that your windows are in good shape.

For single pane windows it is fairly easy to replace windows, and the new one will usually fit inside the frame of the previous one easily. If windows with double panes are joined by internal beading, it will be harder to remove and replace the panes that were previously in use. In this situation you'll need locate some plastic spacers to help the new pane to fit perfectly into the window frame.

Wearing eye protection and heavy gloves is essential for anyone who plans to remove the glass yourself. It is also an excellent idea to lay down a dropcloth before you start working on the glass to ensure that any fragments of glass fall onto the fabric instead of landing on the floor where they can be trampled on and cause further damage.

It's a great idea to tape the gap once the glass has been removed. This will prevent drafts and water from entering your home until a professional is able to repair the window. It also acts as an obstacle to stop criminals from getting into your home. If the gap is particularly large, you may be interested in a security door that has an integrated window as it offers the best of both worlds.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash window repairs near me. Over time, they can develop a number of problems that include sagging. A window that is sagging can cause problems with light, draughts and even security. It's crucial to act as soon as you discover that your uPVC windows are sliding.

Repositioning the hinges can aid in fixing a window that is sliding. To accomplish this, you'll have to open the window so that you can get to the frame. Then, remove both the top and bottom hinges with a screwdriver and adjust the hinges clockwise or counter-clockwise. Once you've repositioned the hinges, close your window and check for fit. If you're happy with the fit, you can tighten the screws to ensure they stay in place.

If you can't reposition the hinges you may need to replace the seal. Over time rubber seals can lose their elasticity and become dry and cause them to loosen. If this happens, it's important to replace the seal as soon as possible to ensure your uPVC windows are watertight and safe from drafts.

uPVC handles could also become loose. This is typically caused by screws that have been removed over time, but it could also be due to the handle mechanism wearing out. It's a good thing that it's simple to fix the handle of a window that is loose yourself. First, you'll need to shut the window and then perform a test fitting. The joint at the corner of the sash should be aligned with the joint on the casing. If it isn't, you can use the screwdriver to loosen up the handle. Then, turn the mechanism into position.

3. Water Leaks

If you awake to wet floors and damp walls each time it rains, it's important to take action. Water leaks through windows can cause structural damage to your home, and hinder your ability to control the temperature in your home. The most frequent reason for leaking uPVC windows is that the sealant surrounding the frame is either damaged or not present.

It is a fairly easy fix and should be undertaken by any skilled DIYer. Depending on how serious the problem is, the old caulking may have to be removed. It is crucial to keep in mind that when it is about uPVC window repairs, you should not be tempted to apply too much caulk and then make the area harder to clean and decrease the efficiency of your energy usage.

Check that any drainage holes have no debris in them, and also ensure that the sill pan has been properly angled to allow the water to drain from the window. In more serious instances, you might need to consider replacing the window.

Other indicators of long-term water leakage are decayed sills and the appearance of black spots of mold on the walls near the window. The is a fungus that thrives in damp conditions and can quickly spread throughout the home.

It is also important to keep in mind that if the leak originates from the glass of your double glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sagging. A uPVC specialist can easily fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and blow open in a breeze It could be hinges at the fault. They can be easily repaired by any skilled DIYer and are usually completed in just a few minutes.

Almost every household in the UK will have top-hung or side-hung uPVC windows that use hinges and, Window Repairs just like any mechanical component they are susceptible to wear and tear over time. It's easy to replace a hinge on a window but it's much easier if someone else helps you hold the frame.

It is also important to ensure that the uPVC hinges are being opened and closed in the correct direction. You can check this by checking for the arrows on each hinge, this indicates the direction in which the window should open.

Faulty window hinges can be caused by incorrectly opening the window a certain way or by improper installation in the factory. It is usually possible to fix the issue by sending us a picture via our website and we will be more than happy to give you suggestions.

It is also crucial to lubricate the hinges regularly. Applying a light engineering lubricant to the hinges is a good method to accomplish this. We suggest using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window operate and close more smoothly. It can also prevent corrosion and reduce the risk of sticking. This should be done at least once a year. WD40 or other solvent-based lubricants should not be used as they can damage your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by a few different factors. First, the hinges due to wear and tear may become displaced, which will cause an opening to appear between the sash and the frame. These can be easily repaired by giving them a good clean, but when they're beyond repair, it may be necessary to get them re-aligned or replaced. In addition, the interlock could also become disaligned. This is located on the hinge's side, and might require to be cleaned. In some instances it might be necessary to replace the hinges.

The seals may wear out or be damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with glass that is low-emissivity, this will help to regulate indoor temperatures and again will reduce draughts.

The last way to reduce drafts effectively is to use a Draught-excluder. These are usually fabric tubes filled with a filler that can be hung over your window sill. These will help to block out cold air and keep your home warm and cosy!

The windows made of upvc can keep providing excellent insulation and security in your home with a little regular maintenance and repairs. However, it is important to realize that all windows have a life span and eventually, they will reach an point at which it is more efficient to replace them than fix them. If you have any problems with your window made of upvc it is recommended to speak with an expert as soon as you can.